22 KiB
22 KiB
| 1 | id | module | severity | message | action |
|---|---|---|---|---|---|
| 2 | E-SD-01 | SD | error | Failed to take SPI mutex | Internal error - send the log to the firmware team |
| 3 | E-SD-02 | SD | error | Failed to mount filesystem. If you want the card to be formatted, set the CONFIG_EXAMPLE_FORMAT_IF_MOUNT_FAILED menuconfig option. | SD card is not FAT formatted or is corrupt; reformat it as FAT32 and restore ENV.TXT |
| 4 | E-SD-03 | SD | error | Failed to initialize the card (%s). Make sure SD card lines have pull-up resistors in place. | Reseat the SD card; if it persists replace the card or check the SD connector |
| 5 | E-SD-04 | SD | error | Failed to stat %s | Reseat the SD card; if it persists replace the card or check the SD connector |
| 6 | E-SD-05 | SD | error | Failed to take SPI mutex | Internal error - send the log to the firmware team |
| 7 | E-ENV-01 | ENV | error | Failed to take SPI mutex | Internal error - send the log to the firmware team |
| 8 | E-ENV-02 | ENV | error | Failed to open .env file for reading | Check ENV.TXT on the SD card exists and has NAME=VALUE lines |
| 9 | E-ENV-03 | ENV | error | Failed to take SPI mutex | Internal error - send the log to the firmware team |
| 10 | E-ENV-04 | ENV | error | Failed to open existing .env file for reading; aborting write to avoid losing other variables | Check ENV.TXT on the SD card exists and has NAME=VALUE lines |
| 11 | E-ENV-05 | ENV | error | Failed to open .env file for writing | Check ENV.TXT on the SD card exists and has NAME=VALUE lines |
| 12 | E-ENV-06 | ENV | error | Failed to take SPI mutex | Internal error - send the log to the firmware team |
| 13 | E-ENV-07 | ENV | error | Failed to open existing .env file for reading; aborting delete to avoid losing other variables | Check ENV.TXT on the SD card exists and has NAME=VALUE lines |
| 14 | E-ENV-08 | ENV | error | Failed to open .env file for writing | Check ENV.TXT on the SD card exists and has NAME=VALUE lines |
| 15 | E-ENV-09 | ENV | error | Failed to take SPI mutex | Internal error - send the log to the firmware team |
| 16 | E-INF-01 | INF | error | Error %d at %s:%d | Internal error - send the log to the firmware team |
| 17 | E-INF-02 | INF | error | Failed to initialize HTTP client | Internal error - send the log to the firmware team |
| 18 | E-INF-03 | INF | error | Failed to perform HTTP request: %d, %s | Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT |
| 19 | E-INF-04 | INF | error | Bad request, check line protocol format: %s | Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT |
| 20 | E-INF-05 | INF | error | Failed to read INFLUX_URL from .env file | Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT |
| 21 | E-INF-06 | INF | error | Failed to read INFLUX_TOKEN from .env file | Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT |
| 22 | E-INF-07 | INF | error | Failed to take SPI mutex | Internal error - send the log to the firmware team |
| 23 | E-INF-08 | INF | error | Failed to open buffer file for reading | Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT |
| 24 | E-INF-09 | INF | error | Failed to take SPI mutex | Internal error - send the log to the firmware team |
| 25 | E-INF-10 | INF | error | Failed to open buffer file for clearing | Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT |
| 26 | E-INF-11 | INF | error | Failed to take SPI mutex | Internal error - send the log to the firmware team |
| 27 | E-INF-12 | INF | error | Failed to create buffer file | Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT |
| 28 | E-INF-13 | INF | error | Failed to open buffer file for appending | Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT |
| 29 | E-INF-14 | INF | error | Failed to take SPI mutex | Internal error - send the log to the firmware team |
| 30 | E-INF-15 | INF | error | Failed to open buffer file for counting | Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT |
| 31 | E-INF-16 | INF | error | Failed to read buffer for flushing: %s | Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT |
| 32 | E-INF-17 | INF | error | Failed to write chunk to Influx: %s | Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT |
| 33 | E-INF-18 | INF | error | Failed to write chunk with 5 retries to Influx: %s | Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT |
| 34 | E-INF-19 | INF | error | Failed to clear buffer after flushing: %s | Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT |
| 35 | E-INF-20 | INF | error | Failed to flush buffer before writing: %s | Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT |
| 36 | E-INF-21 | INF | error | Failed to write to Influx: %s | Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT |
| 37 | E-INF-22 | INF | error | Failed to append new entry to buffer: %s | Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT |
| 38 | E-OTA-01 | OTA | error | Error %s at %s:%d | Internal error - send the log to the firmware team |
| 39 | E-OTA-02 | OTA | error | Failed to create OTA task | Internal error - send the log to the firmware team |
| 40 | E-OTA-03 | OTA | error | Failed to open NVS: %s | Internal error - send the log to the firmware team |
| 41 | E-OTA-04 | OTA | error | Failed to read OTA token from NVS: %s | Internal error - send the log to the firmware team |
| 42 | E-OTA-05 | OTA | error | Failed to read OTA token from NVS: %s | Internal error - send the log to the firmware team |
| 43 | E-OTA-06 | OTA | error | Failed to get running partition | Check the network connection; if it persists send the log to the firmware team |
| 44 | E-OTA-07 | OTA | error | Failed to get OTA state | Check the network connection; if it persists send the log to the firmware team |
| 45 | E-OTA-08 | OTA | error | Failed to read update metadata from NVS: %s | Internal error - send the log to the firmware team |
| 46 | E-OTA-09 | OTA | error | Failed to report failed selfcheck: %s | Check the network connection; if it persists send the log to the firmware team |
| 47 | E-OTA-10 | OTA | error | Failed to initialize HTTP client | Internal error - send the log to the firmware team |
| 48 | E-OTA-11 | OTA | error | Device registration failed with status code: %d | Check the network connection; if it persists send the log to the firmware team |
| 49 | E-OTA-12 | OTA | error | Device registration failed: %s | Check the network connection; if it persists send the log to the firmware team |
| 50 | E-OTA-13 | OTA | error | Failed to check for updates: %s | Check the network connection; if it persists send the log to the firmware team |
| 51 | E-OTA-14 | OTA | error | Free stack size decreased from %u to %u | Internal error - send the log to the firmware team |
| 52 | E-OTA-15 | OTA | error | Failed to initialize HTTP client | Internal error - send the log to the firmware team |
| 53 | E-OTA-16 | OTA | error | OTA Update check failed with status code: %d | Check the network connection; if it persists send the log to the firmware team |
| 54 | E-OTA-17 | OTA | error | Update %s has already been tried %u times and failed, not trying again | Internal error - send the log to the firmware team |
| 55 | E-OTA-18 | OTA | error | OTA update failed: %s | Check the network connection; if it persists send the log to the firmware team |
| 56 | E-OTA-19 | OTA | error | Failed to read update metadata from NVS: %s | Internal error - send the log to the firmware team |
| 57 | E-OTA-20 | OTA | error | Failed to read update ID from NVS: %s | Internal error - send the log to the firmware team |
| 58 | E-OTA-21 | OTA | error | Failed to read update ID from NVS: %s | Internal error - send the log to the firmware team |
| 59 | E-OTA-22 | OTA | error | Failed to read update tries from NVS: %s | Internal error - send the log to the firmware team |
| 60 | E-OTA-23 | OTA | error | Failing selfcheck: %s | Firmware update failed its self check and will roll back; check the sensors listed in the log |
| 61 | E-OTA-24 | OTA | error | Failed to send update result: %s | Check the network connection; if it persists send the log to the firmware team |
| 62 | E-OTA-25 | OTA | error | Failed to mark app as invalid for rollback: %s | Internal error - send the log to the firmware team |
| 63 | E-OTA-26 | OTA | error | Failed to send update result: %s | Check the network connection; if it persists send the log to the firmware team |
| 64 | E-OTA-27 | OTA | error | Failed to mark app as valid to commit update: %s | Internal error - send the log to the firmware team |
| 65 | E-OTA-28 | OTA | error | Failed to initialize HTTP client | Internal error - send the log to the firmware team |
| 66 | E-OTA-29 | OTA | error | Failed to send update result with status code: %d | Check the network connection; if it persists send the log to the firmware team |
| 67 | E-WIFI-01 | WIFI | error | esp_netif_init() failed: %s | Check WiFi signal and credentials; re-run WiFi provisioning (short button press) |
| 68 | E-WIFI-02 | WIFI | error | esp_event_loop_create_default() failed: %s | Check WiFi signal and credentials; re-run WiFi provisioning (short button press) |
| 69 | E-WIFI-03 | WIFI | error | esp_wifi_init() failed: %s | Check WiFi signal and credentials; re-run WiFi provisioning (short button press) |
| 70 | E-WIFI-04 | WIFI | error | Failed to register WIFI_EVENT handler: %s | Check WiFi signal and credentials; re-run WiFi provisioning (short button press) |
| 71 | E-WIFI-05 | WIFI | error | Failed to register IP_EVENT handler: %s | Check WiFi signal and credentials; re-run WiFi provisioning (short button press) |
| 72 | E-WIFI-06 | WIFI | error | esp_wifi_set_mode() failed: %s | Check WiFi signal and credentials; re-run WiFi provisioning (short button press) |
| 73 | E-WIFI-07 | WIFI | error | esp_timer_create() failed: %s | Check WiFi signal and credentials; re-run WiFi provisioning (short button press) |
| 74 | E-WIFI-08 | WIFI | error | esp_wifi_start() failed: %s | Check WiFi signal and credentials; re-run WiFi provisioning (short button press) |
| 75 | E-WIFI-09 | WIFI | error | esp_wifi_set_config() failed: %s | Check WiFi signal and credentials; re-run WiFi provisioning (short button press) |
| 76 | E-WIFI-10 | WIFI | error | esp_wifi_connect() failed: %s | Check WiFi signal and credentials; re-run WiFi provisioning (short button press) |
| 77 | E-WIFI-11 | WIFI | error | esp_wifi_set_mode(APSTA) failed: %s | Check WiFi signal and credentials; re-run WiFi provisioning (short button press) |
| 78 | E-WIFI-12 | WIFI | error | esp_wifi_set_config(AP) failed: %s | Check WiFi signal and credentials; re-run WiFi provisioning (short button press) |
| 79 | E-WIFI-13 | WIFI | error | esp_wifi_connect() failed: %s | Check WiFi signal and credentials; re-run WiFi provisioning (short button press) |
| 80 | E-WIFI-14 | WIFI | error | esp_wifi_scan_start() failed: %s | Check WiFi signal and credentials; re-run WiFi provisioning (short button press) |
| 81 | E-WIFI-15 | WIFI | error | esp_wifi_scan_get_ap_num() failed: %s | Check WiFi signal and credentials; re-run WiFi provisioning (short button press) |
| 82 | E-WIFI-16 | WIFI | error | esp_wifi_scan_get_ap_records() failed: %s | Check WiFi signal and credentials; re-run WiFi provisioning (short button press) |
| 83 | E-PROV-01 | PROV | error | mdns_init() failed: %s | Retry WiFi provisioning (short button press); restart the device if it persists |
| 84 | E-PROV-02 | PROV | error | httpd_start() failed: %s | Retry WiFi provisioning (short button press); restart the device if it persists |
| 85 | E-MAIN-01 | MAIN | error | Error %d at %s:%d | Internal error - send the log to the firmware team |
| 86 | E-MAIN-02 | MAIN | error | Failed to open commissioning window, err:% | Internal error - send the log to the firmware team |
| 87 | E-MAIN-03 | MAIN | error | Attribute update callback: endpoint_id: %u, cluster_id: 0x%lx, attribute_id: 0x%lx | Internal error - send the log to the firmware team |
| 88 | E-MAIN-04 | MAIN | error | Device MAC address: %02X:%02X:%02X:%02X:%02X:%02X | Internal error - send the log to the firmware team |
| 89 | E-MAIN-05 | MAIN | error | Failed to initialize SD card: %s | Reseat the SD card; if it persists replace the card or check the SD connector |
| 90 | E-MAIN-06 | MAIN | error | Failed to initialize EnvironmentService: %s | Check ENV.TXT on the SD card exists and has NAME=VALUE lines |
| 91 | E-MAIN-07 | MAIN | error | Failed to initialize WifiCredentialsService: %s | Check ENV.TXT on the SD card exists and has NAME=VALUE lines |
| 92 | E-MAIN-08 | MAIN | error | WiFi provisioning server failed to start: %s; clearing HTTP_SERVER and restarting | Retry WiFi provisioning (short button press); restart the device if it persists |
| 93 | E-MAIN-09 | MAIN | error | Failed to create Matter node | Internal error - send the log to the firmware team |
| 94 | E-MAIN-10 | MAIN | error | Failed to start ESP-Matter | Internal error - send the log to the firmware team |
| 95 | E-MAIN-11 | MAIN | error | Failed to start WifiService: %s | Check WiFi signal and credentials; re-run WiFi provisioning (short button press) |
| 96 | E-MAIN-12 | MAIN | error | Failed to initialized the encrypted OTA, err: %d | Internal error - send the log to the firmware team |
| 97 | E-MAIN-13 | MAIN | error | Failed to initialize RTC: %s | Check the RTC (DS1307) and the sensor cable |
| 98 | E-MAIN-14 | MAIN | error | Failed to initialize Influx buffer: %s | Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT |
| 99 | E-MAIN-15 | MAIN | error | Failed to initialize BME688: %s | Check the BME688 sensor and the sensor cable |
| 100 | E-MAIN-16 | MAIN | error | Failed to initialize SEN66: %s | Check the SEN66 sensor, its power supply and the sensor cable |
| 101 | E-MAIN-17 | MAIN | error | Failed to initialize AS7341: %s | Check the AS7341 light sensor and the sensor cable |
| 102 | E-MAIN-18 | MAIN | error | Failed to initialize Microphone: %s | Check the microphone board and its cable |
| 103 | E-MAIN-19 | MAIN | error | Failed to initialize Flicker sensor: %s | Check the flicker sensor and its cable |
| 104 | E-MAIN-20 | MAIN | error | Failed to initialize DeviceStatus: %s | Internal error - send the log to the firmware team |
| 105 | E-MAIN-21 | MAIN | error | BME688 self check failed: %s | Check the BME688 sensor and the sensor cable |
| 106 | E-MAIN-22 | MAIN | error | SEN66 self check failed: %s | Check the SEN66 sensor, its power supply and the sensor cable |
| 107 | E-MAIN-23 | MAIN | error | AS7341 self check failed: %s | Check the AS7341 light sensor and the sensor cable |
| 108 | E-MAIN-24 | MAIN | error | Microphone self check failed: %s | Check the microphone board and its cable |
| 109 | E-MAIN-25 | MAIN | error | Flicker sensor self check failed: %s | Check the flicker sensor and its cable |
| 110 | E-MAIN-26 | MAIN | error | Failed to report passed selfcheck: %s | Internal error - send the log to the firmware team |
| 111 | E-MAIN-27 | MAIN | error | Failed to flush Influx buffer: %s | Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT |
| 112 | E-STAT-01 | STAT | error | Failed to initialize LED strip: %s | Internal error - send the log to the firmware team |
| 113 | E-SPI-01 | SPI | error | Failed to take SPI mutex | Internal error - send the log to the firmware team |
| 114 | E-RTC-01 | RTC | error | Failed to take I2C mutex | Internal error - send the log to the firmware team |
| 115 | E-RTC-02 | RTC | error | Failed to add I2C device: %s | Check the RTC (DS1307) and the sensor cable |
| 116 | E-RTC-03 | RTC | error | Failed to initialize DS1307 control register: %s | Check the RTC (DS1307) and the sensor cable |
| 117 | E-RTC-04 | RTC | error | Attempted to set time on uninitialized DS1307 | Internal error - send the log to the firmware team |
| 118 | E-RTC-05 | RTC | error | Failed to take I2C mutex | Internal error - send the log to the firmware team |
| 119 | E-RTC-06 | RTC | error | Attempted to get time on uninitialized DS1307 | Internal error - send the log to the firmware team |
| 120 | E-RTC-07 | RTC | error | Failed to take I2C mutex | Internal error - send the log to the firmware team |
| 121 | E-RTC-08 | RTC | error | Attempted to start updating time on uninitialized DS1307 | Internal error - send the log to the firmware team |
| 122 | E-BME-01 | BME | error | Failed to take I2C mutex | Internal error - send the log to the firmware team |
| 123 | E-BME-02 | BME | error | Failed to add I2C device: %d | Check the BME688 sensor and the sensor cable |
| 124 | E-BME-03 | BME | error | Failed to initialize BME688: %d | Check the BME688 sensor and the sensor cable |
| 125 | E-BME-04 | BME | error | Failed to set BME688 configuration: %d | Check the BME688 sensor and the sensor cable |
| 126 | E-BME-05 | BME | error | Failed to set BME688 heater configuration: %d | Check the BME688 sensor and the sensor cable |
| 127 | E-BME-06 | BME | error | Failed to set BME688 operation mode: %d | Check the BME688 sensor and the sensor cable |
| 128 | E-BME-07 | BME | error | Failed to get BME688 data: %d | Check the BME688 sensor and the sensor cable |
| 129 | E-BME-08 | BME | error | No new data available from BME688 | Check the BME688 sensor and the sensor cable |
| 130 | E-BME-09 | BME | error | Failed to get data from BME688: %s | Check the BME688 sensor and the sensor cable |
| 131 | E-BME-10 | BME | error | Self check failed: %s | Check the BME688 sensor and the sensor cable |
| 132 | E-BME-11 | BME | error | Failed to take I2C mutex | Internal error - send the log to the firmware team |
| 133 | E-BME-12 | BME | error | I2C read failed: %s | Check the BME688 sensor and the sensor cable |
| 134 | E-BME-13 | BME | error | Failed to take I2C mutex | Internal error - send the log to the firmware team |
| 135 | E-BME-14 | BME | error | Failed to allocate memory for I2C write buffer | Internal error - send the log to the firmware team |
| 136 | E-BME-15 | BME | error | I2C write failed: %s | Check the BME688 sensor and the sensor cable |
| 137 | E-SEN-01 | SEN | error | Failed to take I2C mutex | Internal error - send the log to the firmware team |
| 138 | E-SEN-02 | SEN | error | Failed to add I2C device: %d | Check the SEN66 sensor, its power supply and the sensor cable |
| 139 | E-SEN-03 | SEN | error | Attempted to wake up uninitialized SEN66 | Internal error - send the log to the firmware team |
| 140 | E-SEN-04 | SEN | error | Failed to take sensor mutex | Internal error - send the log to the firmware team |
| 141 | E-SEN-05 | SEN | error | Failed to send start measurement command: %d | Check the SEN66 sensor, its power supply and the sensor cable |
| 142 | E-SEN-06 | SEN | error | Attempted to sleep uninitialized SEN66 | Internal error - send the log to the firmware team |
| 143 | E-SEN-07 | SEN | error | Failed to take sensor mutex | Internal error - send the log to the firmware team |
| 144 | E-SEN-08 | SEN | error | Failed to send stop measurement command: %d | Check the SEN66 sensor, its power supply and the sensor cable |
| 145 | E-SEN-09 | SEN | error | Failed to take I2C mutex | Internal error - send the log to the firmware team |
| 146 | E-SEN-10 | SEN | error | Failed to take I2C mutex | Internal error - send the log to the firmware team |
| 147 | E-SEN-11 | SEN | error | Failed to read ready status: %d | Check the SEN66 sensor, its power supply and the sensor cable |
| 148 | E-SEN-12 | SEN | error | Sensor not ready after %d attempts, trying to wake it up | Check the SEN66 sensor, its power supply and the sensor cable |
| 149 | E-SEN-13 | SEN | error | Failed to read measurement: %d | Check the SEN66 sensor, its power supply and the sensor cable |
| 150 | E-SEN-14 | SEN | error | Failed while awaiting sensor ready: %d | Check the SEN66 sensor, its power supply and the sensor cable |
| 151 | E-SEN-15 | SEN | error | Failed to read measurement for line protocol: %d | Check the SEN66 sensor, its power supply and the sensor cable |
| 152 | E-SEN-16 | SEN | error | Self-check failed: Sensor not ready: %d | Check the SEN66 sensor, its power supply and the sensor cable |
| 153 | E-SEN-17 | SEN | error | Self-check failed: Failed to read measurement: %d | Check the SEN66 sensor, its power supply and the sensor cable |
| 154 | E-AS-01 | AS | error | Failed to take I2C mutex | Internal error - send the log to the firmware team |
| 155 | E-AS-02 | AS | error | Failed to initialize AS7341: %s | Check the AS7341 light sensor and the sensor cable |
| 156 | E-AS-03 | AS | error | Attempted to wake up uninitialized AS7341 | Internal error - send the log to the firmware team |
| 157 | E-AS-04 | AS | error | Failed to take I2C mutex | Internal error - send the log to the firmware team |
| 158 | E-AS-05 | AS | error | Failed to wake up AS7341: %s | Check the AS7341 light sensor and the sensor cable |
| 159 | E-AS-06 | AS | error | Attempted to put uninitialized AS7341 to sleep | Internal error - send the log to the firmware team |
| 160 | E-AS-07 | AS | error | Failed to take I2C mutex | Internal error - send the log to the firmware team |
| 161 | E-AS-08 | AS | error | Failed to put AS7341 to sleep: %s | Check the AS7341 light sensor and the sensor cable |
| 162 | E-AS-09 | AS | error | Attempted to get line protocol on uninitialized AS7341 | Internal error - send the log to the firmware team |
| 163 | E-AS-10 | AS | error | Failed to take I2C mutex | Internal error - send the log to the firmware team |
| 164 | E-AS-11 | AS | error | Failed to read spectral data: %s | Check the AS7341 light sensor and the sensor cable |
| 165 | E-AS-12 | AS | error | Failed to read basic counts data: %s | Check the AS7341 light sensor and the sensor cable |
| 166 | E-AS-13 | AS | error | Failed to read flicker detection state: %s | Check the AS7341 light sensor and the sensor cable |
| 167 | E-AS-14 | AS | error | Self-check failed: Failed to read spectral data: %s | Check the AS7341 light sensor and the sensor cable |
| 168 | E-MIC-01 | MIC | error | Failed to create I2S channel: %s | Check the microphone board and its cable |
| 169 | E-MIC-02 | MIC | error | Failed to initialize I2S channel in standard mode: %s | Check the microphone board and its cable |
| 170 | E-MIC-03 | MIC | error | Failed to configure shutdown pin: %s | Check the microphone board and its cable |
| 171 | E-MIC-04 | MIC | error | Failed to read samples from I2S channel: %s | Check the microphone board and its cable |
| 172 | E-MIC-05 | MIC | error | Failed to read samples for line protocol: %s | Check the microphone board and its cable |
| 173 | E-FLK-01 | FLK | error | Error %s at %s:%d | Internal error - send the log to the firmware team |
| 174 | E-FLK-02 | FLK | error | Attempting to initialize sensor that is already initialized | Check the flicker sensor and its cable |
| 175 | E-FLK-03 | FLK | error | Failed to allocate memory for FFT buffers | Internal error - send the log to the firmware team |
| 176 | E-FLK-04 | FLK | error | Failed to initialize FFT: %s | Check the flicker sensor and its cable |
| 177 | E-FLK-05 | FLK | error | Attempting to read from uninitialized sensor | Internal error - send the log to the firmware team |
| 178 | E-FLK-06 | FLK | error | Failed to take I2C mutex | Internal error - send the log to the firmware team |
| 179 | E-FLK-07 | FLK | error | Failed to get dominant frequency: %s | Check the flicker sensor and its cable |
| 180 | E-FLK-08 | FLK | error | Attempting to read from uninitialized sensor | Internal error - send the log to the firmware team |
| 181 | E-FLK-09 | FLK | error | Failed to read ADC value: %s | Check the flicker sensor and its cable |
| 182 | E-FLK-10 | FLK | error | Failed to create gather task: %s | Internal error - send the log to the firmware team |
| 183 | E-FLK-11 | FLK | error | Attempting to self check uninitialized sensor | Internal error - send the log to the firmware team |
| 184 | E-FLK-12 | FLK | error | Self check failed to get dominant frequency: %s | Check the flicker sensor and its cable |
| 185 | E-DEV-01 | DEV | error | Failed to initialize ADC unit: %s | Internal error - send the log to the firmware team |
| 186 | E-DEV-02 | DEV | error | Failed to configure ADC channel: %s | Internal error - send the log to the firmware team |
| 187 | E-DEV-03 | DEV | error | Failed to install temperature sensor: %s | Internal error - send the log to the firmware team |
| 188 | E-DEV-04 | DEV | error | Failed to read ADC value: %s | Internal error - send the log to the firmware team |
| 189 | E-DEV-05 | DEV | error | Failed to allocate memory for task list buffer | Internal error - send the log to the firmware team |
| 190 | E-GATH-01 | GATH | error | Failed to take line protocol mutex | Internal error - send the log to the firmware team |
| 191 | E-GATH-02 | GATH | error | Failed to get line protocol from sensor | Device ran out of memory; restart it and send the log to the firmware team |
| 192 | E-GATH-03 | GATH | error | Failed to create task for sensor | Internal error - send the log to the firmware team |
| 193 | E-GATH-04 | GATH | error | Failed to create main gather task | Internal error - send the log to the firmware team |