194 lines
22 KiB
CSV
194 lines
22 KiB
CSV
id,module,severity,message,action
|
|
E-SD-01,SD,error,Failed to take SPI mutex,Internal error - send the log to the firmware team
|
|
E-SD-02,SD,error,"Failed to mount filesystem. If you want the card to be formatted, set the CONFIG_EXAMPLE_FORMAT_IF_MOUNT_FAILED menuconfig option.",SD card is not FAT formatted or is corrupt; reformat it as FAT32 and restore ENV.TXT
|
|
E-SD-03,SD,error,Failed to initialize the card (%s). Make sure SD card lines have pull-up resistors in place.,Reseat the SD card; if it persists replace the card or check the SD connector
|
|
E-SD-04,SD,error,Failed to stat %s,Reseat the SD card; if it persists replace the card or check the SD connector
|
|
E-SD-05,SD,error,Failed to take SPI mutex,Internal error - send the log to the firmware team
|
|
E-ENV-01,ENV,error,Failed to take SPI mutex,Internal error - send the log to the firmware team
|
|
E-ENV-02,ENV,error,Failed to open .env file for reading,Check ENV.TXT on the SD card exists and has NAME=VALUE lines
|
|
E-ENV-03,ENV,error,Failed to take SPI mutex,Internal error - send the log to the firmware team
|
|
E-ENV-04,ENV,error,Failed to open existing .env file for reading; aborting write to avoid losing other variables,Check ENV.TXT on the SD card exists and has NAME=VALUE lines
|
|
E-ENV-05,ENV,error,Failed to open .env file for writing,Check ENV.TXT on the SD card exists and has NAME=VALUE lines
|
|
E-ENV-06,ENV,error,Failed to take SPI mutex,Internal error - send the log to the firmware team
|
|
E-ENV-07,ENV,error,Failed to open existing .env file for reading; aborting delete to avoid losing other variables,Check ENV.TXT on the SD card exists and has NAME=VALUE lines
|
|
E-ENV-08,ENV,error,Failed to open .env file for writing,Check ENV.TXT on the SD card exists and has NAME=VALUE lines
|
|
E-ENV-09,ENV,error,Failed to take SPI mutex,Internal error - send the log to the firmware team
|
|
E-INF-01,INF,error,Error %d at %s:%d,Internal error - send the log to the firmware team
|
|
E-INF-02,INF,error,Failed to initialize HTTP client,Internal error - send the log to the firmware team
|
|
E-INF-03,INF,error,"Failed to perform HTTP request: %d, %s",Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT
|
|
E-INF-04,INF,error,"Bad request, check line protocol format: %s",Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT
|
|
E-INF-05,INF,error,Failed to read INFLUX_URL from .env file,Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT
|
|
E-INF-06,INF,error,Failed to read INFLUX_TOKEN from .env file,Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT
|
|
E-INF-07,INF,error,Failed to take SPI mutex,Internal error - send the log to the firmware team
|
|
E-INF-08,INF,error,Failed to open buffer file for reading,Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT
|
|
E-INF-09,INF,error,Failed to take SPI mutex,Internal error - send the log to the firmware team
|
|
E-INF-10,INF,error,Failed to open buffer file for clearing,Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT
|
|
E-INF-11,INF,error,Failed to take SPI mutex,Internal error - send the log to the firmware team
|
|
E-INF-12,INF,error,Failed to create buffer file,Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT
|
|
E-INF-13,INF,error,Failed to open buffer file for appending,Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT
|
|
E-INF-14,INF,error,Failed to take SPI mutex,Internal error - send the log to the firmware team
|
|
E-INF-15,INF,error,Failed to open buffer file for counting,Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT
|
|
E-INF-16,INF,error,Failed to read buffer for flushing: %s,Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT
|
|
E-INF-17,INF,error,Failed to write chunk to Influx: %s,Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT
|
|
E-INF-18,INF,error,Failed to write chunk with 5 retries to Influx: %s,Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT
|
|
E-INF-19,INF,error,Failed to clear buffer after flushing: %s,Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT
|
|
E-INF-20,INF,error,Failed to flush buffer before writing: %s,Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT
|
|
E-INF-21,INF,error,Failed to write to Influx: %s,Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT
|
|
E-INF-22,INF,error,Failed to append new entry to buffer: %s,Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT
|
|
E-OTA-01,OTA,error,Error %s at %s:%d,Internal error - send the log to the firmware team
|
|
E-OTA-02,OTA,error,Failed to create OTA task,Internal error - send the log to the firmware team
|
|
E-OTA-03,OTA,error,Failed to open NVS: %s,Internal error - send the log to the firmware team
|
|
E-OTA-04,OTA,error,Failed to read OTA token from NVS: %s,Internal error - send the log to the firmware team
|
|
E-OTA-05,OTA,error,Failed to read OTA token from NVS: %s,Internal error - send the log to the firmware team
|
|
E-OTA-06,OTA,error,Failed to get running partition,Check the network connection; if it persists send the log to the firmware team
|
|
E-OTA-07,OTA,error,Failed to get OTA state,Check the network connection; if it persists send the log to the firmware team
|
|
E-OTA-08,OTA,error,Failed to read update metadata from NVS: %s,Internal error - send the log to the firmware team
|
|
E-OTA-09,OTA,error,Failed to report failed selfcheck: %s,Check the network connection; if it persists send the log to the firmware team
|
|
E-OTA-10,OTA,error,Failed to initialize HTTP client,Internal error - send the log to the firmware team
|
|
E-OTA-11,OTA,error,Device registration failed with status code: %d,Check the network connection; if it persists send the log to the firmware team
|
|
E-OTA-12,OTA,error,Device registration failed: %s,Check the network connection; if it persists send the log to the firmware team
|
|
E-OTA-13,OTA,error,Failed to check for updates: %s,Check the network connection; if it persists send the log to the firmware team
|
|
E-OTA-14,OTA,error,Free stack size decreased from %u to %u,Internal error - send the log to the firmware team
|
|
E-OTA-15,OTA,error,Failed to initialize HTTP client,Internal error - send the log to the firmware team
|
|
E-OTA-16,OTA,error,OTA Update check failed with status code: %d,Check the network connection; if it persists send the log to the firmware team
|
|
E-OTA-17,OTA,error,"Update %s has already been tried %u times and failed, not trying again",Internal error - send the log to the firmware team
|
|
E-OTA-18,OTA,error,OTA update failed: %s,Check the network connection; if it persists send the log to the firmware team
|
|
E-OTA-19,OTA,error,Failed to read update metadata from NVS: %s,Internal error - send the log to the firmware team
|
|
E-OTA-20,OTA,error,Failed to read update ID from NVS: %s,Internal error - send the log to the firmware team
|
|
E-OTA-21,OTA,error,Failed to read update ID from NVS: %s,Internal error - send the log to the firmware team
|
|
E-OTA-22,OTA,error,Failed to read update tries from NVS: %s,Internal error - send the log to the firmware team
|
|
E-OTA-23,OTA,error,Failing selfcheck: %s,Firmware update failed its self check and will roll back; check the sensors listed in the log
|
|
E-OTA-24,OTA,error,Failed to send update result: %s,Check the network connection; if it persists send the log to the firmware team
|
|
E-OTA-25,OTA,error,Failed to mark app as invalid for rollback: %s,Internal error - send the log to the firmware team
|
|
E-OTA-26,OTA,error,Failed to send update result: %s,Check the network connection; if it persists send the log to the firmware team
|
|
E-OTA-27,OTA,error,Failed to mark app as valid to commit update: %s,Internal error - send the log to the firmware team
|
|
E-OTA-28,OTA,error,Failed to initialize HTTP client,Internal error - send the log to the firmware team
|
|
E-OTA-29,OTA,error,Failed to send update result with status code: %d,Check the network connection; if it persists send the log to the firmware team
|
|
E-WIFI-01,WIFI,error,esp_netif_init() failed: %s,Check WiFi signal and credentials; re-run WiFi provisioning (short button press)
|
|
E-WIFI-02,WIFI,error,esp_event_loop_create_default() failed: %s,Check WiFi signal and credentials; re-run WiFi provisioning (short button press)
|
|
E-WIFI-03,WIFI,error,esp_wifi_init() failed: %s,Check WiFi signal and credentials; re-run WiFi provisioning (short button press)
|
|
E-WIFI-04,WIFI,error,Failed to register WIFI_EVENT handler: %s,Check WiFi signal and credentials; re-run WiFi provisioning (short button press)
|
|
E-WIFI-05,WIFI,error,Failed to register IP_EVENT handler: %s,Check WiFi signal and credentials; re-run WiFi provisioning (short button press)
|
|
E-WIFI-06,WIFI,error,esp_wifi_set_mode() failed: %s,Check WiFi signal and credentials; re-run WiFi provisioning (short button press)
|
|
E-WIFI-07,WIFI,error,esp_timer_create() failed: %s,Check WiFi signal and credentials; re-run WiFi provisioning (short button press)
|
|
E-WIFI-08,WIFI,error,esp_wifi_start() failed: %s,Check WiFi signal and credentials; re-run WiFi provisioning (short button press)
|
|
E-WIFI-09,WIFI,error,esp_wifi_set_config() failed: %s,Check WiFi signal and credentials; re-run WiFi provisioning (short button press)
|
|
E-WIFI-10,WIFI,error,esp_wifi_connect() failed: %s,Check WiFi signal and credentials; re-run WiFi provisioning (short button press)
|
|
E-WIFI-11,WIFI,error,esp_wifi_set_mode(APSTA) failed: %s,Check WiFi signal and credentials; re-run WiFi provisioning (short button press)
|
|
E-WIFI-12,WIFI,error,esp_wifi_set_config(AP) failed: %s,Check WiFi signal and credentials; re-run WiFi provisioning (short button press)
|
|
E-WIFI-13,WIFI,error,esp_wifi_connect() failed: %s,Check WiFi signal and credentials; re-run WiFi provisioning (short button press)
|
|
E-WIFI-14,WIFI,error,esp_wifi_scan_start() failed: %s,Check WiFi signal and credentials; re-run WiFi provisioning (short button press)
|
|
E-WIFI-15,WIFI,error,esp_wifi_scan_get_ap_num() failed: %s,Check WiFi signal and credentials; re-run WiFi provisioning (short button press)
|
|
E-WIFI-16,WIFI,error,esp_wifi_scan_get_ap_records() failed: %s,Check WiFi signal and credentials; re-run WiFi provisioning (short button press)
|
|
E-PROV-01,PROV,error,mdns_init() failed: %s,Retry WiFi provisioning (short button press); restart the device if it persists
|
|
E-PROV-02,PROV,error,httpd_start() failed: %s,Retry WiFi provisioning (short button press); restart the device if it persists
|
|
E-MAIN-01,MAIN,error,Error %d at %s:%d,Internal error - send the log to the firmware team
|
|
E-MAIN-02,MAIN,error,"Failed to open commissioning window, err:%",Internal error - send the log to the firmware team
|
|
E-MAIN-03,MAIN,error,"Attribute update callback: endpoint_id: %u, cluster_id: 0x%lx, attribute_id: 0x%lx",Internal error - send the log to the firmware team
|
|
E-MAIN-04,MAIN,error,Device MAC address: %02X:%02X:%02X:%02X:%02X:%02X,Internal error - send the log to the firmware team
|
|
E-MAIN-05,MAIN,error,Failed to initialize SD card: %s,Reseat the SD card; if it persists replace the card or check the SD connector
|
|
E-MAIN-06,MAIN,error,Failed to initialize EnvironmentService: %s,Check ENV.TXT on the SD card exists and has NAME=VALUE lines
|
|
E-MAIN-07,MAIN,error,Failed to initialize WifiCredentialsService: %s,Check ENV.TXT on the SD card exists and has NAME=VALUE lines
|
|
E-MAIN-08,MAIN,error,WiFi provisioning server failed to start: %s; clearing HTTP_SERVER and restarting,Retry WiFi provisioning (short button press); restart the device if it persists
|
|
E-MAIN-09,MAIN,error,Failed to create Matter node,Internal error - send the log to the firmware team
|
|
E-MAIN-10,MAIN,error,Failed to start ESP-Matter,Internal error - send the log to the firmware team
|
|
E-MAIN-11,MAIN,error,Failed to start WifiService: %s,Check WiFi signal and credentials; re-run WiFi provisioning (short button press)
|
|
E-MAIN-12,MAIN,error,"Failed to initialized the encrypted OTA, err: %d",Internal error - send the log to the firmware team
|
|
E-MAIN-13,MAIN,error,Failed to initialize RTC: %s,Check the RTC (DS1307) and the sensor cable
|
|
E-MAIN-14,MAIN,error,Failed to initialize Influx buffer: %s,Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT
|
|
E-MAIN-15,MAIN,error,Failed to initialize BME688: %s,Check the BME688 sensor and the sensor cable
|
|
E-MAIN-16,MAIN,error,Failed to initialize SEN66: %s,"Check the SEN66 sensor, its power supply and the sensor cable"
|
|
E-MAIN-17,MAIN,error,Failed to initialize AS7341: %s,Check the AS7341 light sensor and the sensor cable
|
|
E-MAIN-18,MAIN,error,Failed to initialize Microphone: %s,Check the microphone board and its cable
|
|
E-MAIN-19,MAIN,error,Failed to initialize Flicker sensor: %s,Check the flicker sensor and its cable
|
|
E-MAIN-20,MAIN,error,Failed to initialize DeviceStatus: %s,Internal error - send the log to the firmware team
|
|
E-MAIN-21,MAIN,error,BME688 self check failed: %s,Check the BME688 sensor and the sensor cable
|
|
E-MAIN-22,MAIN,error,SEN66 self check failed: %s,"Check the SEN66 sensor, its power supply and the sensor cable"
|
|
E-MAIN-23,MAIN,error,AS7341 self check failed: %s,Check the AS7341 light sensor and the sensor cable
|
|
E-MAIN-24,MAIN,error,Microphone self check failed: %s,Check the microphone board and its cable
|
|
E-MAIN-25,MAIN,error,Flicker sensor self check failed: %s,Check the flicker sensor and its cable
|
|
E-MAIN-26,MAIN,error,Failed to report passed selfcheck: %s,Internal error - send the log to the firmware team
|
|
E-MAIN-27,MAIN,error,Failed to flush Influx buffer: %s,Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT
|
|
E-STAT-01,STAT,error,Failed to initialize LED strip: %s,Internal error - send the log to the firmware team
|
|
E-SPI-01,SPI,error,Failed to take SPI mutex,Internal error - send the log to the firmware team
|
|
E-RTC-01,RTC,error,Failed to take I2C mutex,Internal error - send the log to the firmware team
|
|
E-RTC-02,RTC,error,Failed to add I2C device: %s,Check the RTC (DS1307) and the sensor cable
|
|
E-RTC-03,RTC,error,Failed to initialize DS1307 control register: %s,Check the RTC (DS1307) and the sensor cable
|
|
E-RTC-04,RTC,error,Attempted to set time on uninitialized DS1307,Internal error - send the log to the firmware team
|
|
E-RTC-05,RTC,error,Failed to take I2C mutex,Internal error - send the log to the firmware team
|
|
E-RTC-06,RTC,error,Attempted to get time on uninitialized DS1307,Internal error - send the log to the firmware team
|
|
E-RTC-07,RTC,error,Failed to take I2C mutex,Internal error - send the log to the firmware team
|
|
E-RTC-08,RTC,error,Attempted to start updating time on uninitialized DS1307,Internal error - send the log to the firmware team
|
|
E-BME-01,BME,error,Failed to take I2C mutex,Internal error - send the log to the firmware team
|
|
E-BME-02,BME,error,Failed to add I2C device: %d,Check the BME688 sensor and the sensor cable
|
|
E-BME-03,BME,error,Failed to initialize BME688: %d,Check the BME688 sensor and the sensor cable
|
|
E-BME-04,BME,error,Failed to set BME688 configuration: %d,Check the BME688 sensor and the sensor cable
|
|
E-BME-05,BME,error,Failed to set BME688 heater configuration: %d,Check the BME688 sensor and the sensor cable
|
|
E-BME-06,BME,error,Failed to set BME688 operation mode: %d,Check the BME688 sensor and the sensor cable
|
|
E-BME-07,BME,error,Failed to get BME688 data: %d,Check the BME688 sensor and the sensor cable
|
|
E-BME-08,BME,error,No new data available from BME688,Check the BME688 sensor and the sensor cable
|
|
E-BME-09,BME,error,Failed to get data from BME688: %s,Check the BME688 sensor and the sensor cable
|
|
E-BME-10,BME,error,Self check failed: %s,Check the BME688 sensor and the sensor cable
|
|
E-BME-11,BME,error,Failed to take I2C mutex,Internal error - send the log to the firmware team
|
|
E-BME-12,BME,error,I2C read failed: %s,Check the BME688 sensor and the sensor cable
|
|
E-BME-13,BME,error,Failed to take I2C mutex,Internal error - send the log to the firmware team
|
|
E-BME-14,BME,error,Failed to allocate memory for I2C write buffer,Internal error - send the log to the firmware team
|
|
E-BME-15,BME,error,I2C write failed: %s,Check the BME688 sensor and the sensor cable
|
|
E-SEN-01,SEN,error,Failed to take I2C mutex,Internal error - send the log to the firmware team
|
|
E-SEN-02,SEN,error,Failed to add I2C device: %d,"Check the SEN66 sensor, its power supply and the sensor cable"
|
|
E-SEN-03,SEN,error,Attempted to wake up uninitialized SEN66,Internal error - send the log to the firmware team
|
|
E-SEN-04,SEN,error,Failed to take sensor mutex,Internal error - send the log to the firmware team
|
|
E-SEN-05,SEN,error,Failed to send start measurement command: %d,"Check the SEN66 sensor, its power supply and the sensor cable"
|
|
E-SEN-06,SEN,error,Attempted to sleep uninitialized SEN66,Internal error - send the log to the firmware team
|
|
E-SEN-07,SEN,error,Failed to take sensor mutex,Internal error - send the log to the firmware team
|
|
E-SEN-08,SEN,error,Failed to send stop measurement command: %d,"Check the SEN66 sensor, its power supply and the sensor cable"
|
|
E-SEN-09,SEN,error,Failed to take I2C mutex,Internal error - send the log to the firmware team
|
|
E-SEN-10,SEN,error,Failed to take I2C mutex,Internal error - send the log to the firmware team
|
|
E-SEN-11,SEN,error,Failed to read ready status: %d,"Check the SEN66 sensor, its power supply and the sensor cable"
|
|
E-SEN-12,SEN,error,"Sensor not ready after %d attempts, trying to wake it up","Check the SEN66 sensor, its power supply and the sensor cable"
|
|
E-SEN-13,SEN,error,Failed to read measurement: %d,"Check the SEN66 sensor, its power supply and the sensor cable"
|
|
E-SEN-14,SEN,error,Failed while awaiting sensor ready: %d,"Check the SEN66 sensor, its power supply and the sensor cable"
|
|
E-SEN-15,SEN,error,Failed to read measurement for line protocol: %d,"Check the SEN66 sensor, its power supply and the sensor cable"
|
|
E-SEN-16,SEN,error,Self-check failed: Sensor not ready: %d,"Check the SEN66 sensor, its power supply and the sensor cable"
|
|
E-SEN-17,SEN,error,Self-check failed: Failed to read measurement: %d,"Check the SEN66 sensor, its power supply and the sensor cable"
|
|
E-AS-01,AS,error,Failed to take I2C mutex,Internal error - send the log to the firmware team
|
|
E-AS-02,AS,error,Failed to initialize AS7341: %s,Check the AS7341 light sensor and the sensor cable
|
|
E-AS-03,AS,error,Attempted to wake up uninitialized AS7341,Internal error - send the log to the firmware team
|
|
E-AS-04,AS,error,Failed to take I2C mutex,Internal error - send the log to the firmware team
|
|
E-AS-05,AS,error,Failed to wake up AS7341: %s,Check the AS7341 light sensor and the sensor cable
|
|
E-AS-06,AS,error,Attempted to put uninitialized AS7341 to sleep,Internal error - send the log to the firmware team
|
|
E-AS-07,AS,error,Failed to take I2C mutex,Internal error - send the log to the firmware team
|
|
E-AS-08,AS,error,Failed to put AS7341 to sleep: %s,Check the AS7341 light sensor and the sensor cable
|
|
E-AS-09,AS,error,Attempted to get line protocol on uninitialized AS7341,Internal error - send the log to the firmware team
|
|
E-AS-10,AS,error,Failed to take I2C mutex,Internal error - send the log to the firmware team
|
|
E-AS-11,AS,error,Failed to read spectral data: %s,Check the AS7341 light sensor and the sensor cable
|
|
E-AS-12,AS,error,Failed to read basic counts data: %s,Check the AS7341 light sensor and the sensor cable
|
|
E-AS-13,AS,error,Failed to read flicker detection state: %s,Check the AS7341 light sensor and the sensor cable
|
|
E-AS-14,AS,error,Self-check failed: Failed to read spectral data: %s,Check the AS7341 light sensor and the sensor cable
|
|
E-MIC-01,MIC,error,Failed to create I2S channel: %s,Check the microphone board and its cable
|
|
E-MIC-02,MIC,error,Failed to initialize I2S channel in standard mode: %s,Check the microphone board and its cable
|
|
E-MIC-03,MIC,error,Failed to configure shutdown pin: %s,Check the microphone board and its cable
|
|
E-MIC-04,MIC,error,Failed to read samples from I2S channel: %s,Check the microphone board and its cable
|
|
E-MIC-05,MIC,error,Failed to read samples for line protocol: %s,Check the microphone board and its cable
|
|
E-FLK-01,FLK,error,Error %s at %s:%d,Internal error - send the log to the firmware team
|
|
E-FLK-02,FLK,error,Attempting to initialize sensor that is already initialized,Check the flicker sensor and its cable
|
|
E-FLK-03,FLK,error,Failed to allocate memory for FFT buffers,Internal error - send the log to the firmware team
|
|
E-FLK-04,FLK,error,Failed to initialize FFT: %s,Check the flicker sensor and its cable
|
|
E-FLK-05,FLK,error,Attempting to read from uninitialized sensor,Internal error - send the log to the firmware team
|
|
E-FLK-06,FLK,error,Failed to take I2C mutex,Internal error - send the log to the firmware team
|
|
E-FLK-07,FLK,error,Failed to get dominant frequency: %s,Check the flicker sensor and its cable
|
|
E-FLK-08,FLK,error,Attempting to read from uninitialized sensor,Internal error - send the log to the firmware team
|
|
E-FLK-09,FLK,error,Failed to read ADC value: %s,Check the flicker sensor and its cable
|
|
E-FLK-10,FLK,error,Failed to create gather task: %s,Internal error - send the log to the firmware team
|
|
E-FLK-11,FLK,error,Attempting to self check uninitialized sensor,Internal error - send the log to the firmware team
|
|
E-FLK-12,FLK,error,Self check failed to get dominant frequency: %s,Check the flicker sensor and its cable
|
|
E-DEV-01,DEV,error,Failed to initialize ADC unit: %s,Internal error - send the log to the firmware team
|
|
E-DEV-02,DEV,error,Failed to configure ADC channel: %s,Internal error - send the log to the firmware team
|
|
E-DEV-03,DEV,error,Failed to install temperature sensor: %s,Internal error - send the log to the firmware team
|
|
E-DEV-04,DEV,error,Failed to read ADC value: %s,Internal error - send the log to the firmware team
|
|
E-DEV-05,DEV,error,Failed to allocate memory for task list buffer,Internal error - send the log to the firmware team
|
|
E-GATH-01,GATH,error,Failed to take line protocol mutex,Internal error - send the log to the firmware team
|
|
E-GATH-02,GATH,error,Failed to get line protocol from sensor,Device ran out of memory; restart it and send the log to the firmware team
|
|
E-GATH-03,GATH,error,Failed to create task for sensor,Internal error - send the log to the firmware team
|
|
E-GATH-04,GATH,error,Failed to create main gather task,Internal error - send the log to the firmware team
|