Compare commits
14
Commits
v0.8
...
834bad2bce
| Author | SHA1 | Date | |
|---|---|---|---|
 kkallas
|
834bad2bce | ||
 kkallasandClaude Opus 5.5
|
c41fa101b6 | ||
|
kkallasandClaude Opus 5.5
|
e299ef40f0 | ||
|
kkallasandClaude Opus 5.5
|
39f0d1718c | ||
|
kkallas
|
6a62beb6aa | ||
|
kkallasandClaude Opus 5.5
|
5bd14e1d5b | ||
|
kkallasandClaude Opus 5.5
|
ab420220e1 | ||
|
kkallasandClaude Opus 5.5
|
0d21c5c205 | ||
|
kkallas
|
3fe45fa4d5 | ||
|
kkallasandClaude Opus 5.5
|
1ab8af8fe2 | ||
|
kkallasandClaude Opus 5.5
|
bfbbd537d5 | ||
|
kkallasandClaude Opus 5.5
|
a33736742a | ||
|
kkallas
|
724c2d62f9 | ||
|
kkallasandClaude Opus 5.5
|
43f4c51aa4 |
No files matched your search
@@ -1,4 +1,6 @@
|
|||||||
|
* text=auto eol=lf
|
||||||
*.command text eol=lf
|
*.command text eol=lf
|
||||||
*.sh text eol=lf
|
*.sh text eol=lf
|
||||||
*.bat text eol=crlf
|
*.bat text eol=crlf
|
||||||
*.bin binary
|
*.bin binary
|
||||||
|
*.png binary
|
||||||
@@ -1,21 +1,52 @@
|
|||||||
# KOTA Sensorbox Technician Tool v0.8
|
# KOTA Sensorbox Technician Tool
|
||||||
|
|
||||||
Diagnoza sensorboxa przez USB, wgrywanie firmware z folderu `firmware/` i przygotowanie karty SD.
|
Diagnoza sensorboxa przez USB, wgrywanie firmware z folderu `firmware/` i przygotowanie karty SD.
|
||||||
Działa na Windows 10/11 i macOS 13 (Ventura) lub nowszym, na Macach z Intelem i Apple Silicon.
|
Działa na Windows 10/11 i macOS 13 (Ventura) lub nowszym, na Macach z Intelem i Apple Silicon.
|
||||||
|
|
||||||
## Uruchomienie
|
Repozytorium: https://gitea.kota-app.com/kkallas/kota-technician-tool (dostęp nadaje właściciel repozytorium).
|
||||||
|
|
||||||
**Windows:** dwuklik `run_windows.bat`.
|
**Instrukcja krok po kroku ze zrzutami ekranu: [docs/INSTRUKCJA_TECHNIKA.md](docs/INSTRUKCJA_TECHNIKA.md) (do druku: [PDF](docs/INSTRUKCJA_TECHNIKA.pdf)).**
|
||||||
|
Box podłączaj tak, żeby po drodze była wtyczka USB 2.0 typu A (do komputera albo do huba).
|
||||||
|
|
||||||
**macOS:** dwuklik `run_macos.command`.
|
## Dla technika: dwa pliki
|
||||||
Jeśli Finder odpowie, że pliku nie można uruchomić (Google Drive gubi uprawnienie „wykonywalny”),
|
|
||||||
otwórz Terminal i jednorazowo wpisz `bash ` (ze spacją), przeciągnij plik `run_macos.command` do okna i naciśnij Enter.
|
|
||||||
Na stałe naprawia to: `chmod +x run_macos.command`.
|
|
||||||
|
|
||||||
Przy pierwszym uruchomieniu skrypt proponuje instalację `uv` (menedżer Pythona, instaluje się tylko dla bieżącego
|
| System | Aktualizacja | Uruchomienie |
|
||||||
użytkownika) i pobiera biblioteki. Potrzebny jest internet, trwa to 1–2 minuty. Kolejne starty są natychmiastowe.
|
|---|---|---|
|
||||||
Środowisko jest poza folderem Google Drive:
|
| Windows | `update_windows.bat` | `run_windows.bat` |
|
||||||
`%LOCALAPPDATA%\KotaTechnicianTool\venv-0.8` (Windows), `~/Library/Caches/KotaTechnicianTool/venv-0.8` (macOS).
|
| macOS | `update_macos.command` | `run_macos.command` |
|
||||||
|
|
||||||
|
- **Aktualizacja** sprawdza na Gitea najnowszą wydaną wersję i pobiera tylko to, co się zmieniło
|
||||||
|
(pliki programu, firmware i potrzebne biblioteki). Uruchom ją, gdy firmware team ogłosi nową wersję,
|
||||||
|
albo po prostu przed wyjazdem do klienta. Pokazuje, co się zmieniło.
|
||||||
|
- **Uruchomienie** startuje program. Nie łączy się z Gitea, działa też bez internetu (po pierwszej aktualizacji).
|
||||||
|
|
||||||
|
Nie trzymaj folderu narzędzia w Google Drive ani OneDrive.
|
||||||
|
|
||||||
|
## Pierwsza instalacja (raz na komputer)
|
||||||
|
|
||||||
|
1. Na Gitea otwórz **Releases** i przy najnowszej wersji pobierz **Source Code (ZIP)**.
|
||||||
|
2. Rozpakuj do zwykłego folderu, np. `Dokumenty\KOTA\technician-tool` (macOS: `~/Documents/KOTA/technician-tool`).
|
||||||
|
3. Uruchom plik aktualizacji dla swojego systemu. Za pierwszym razem:
|
||||||
|
- połączy folder z Gitea i zapyta o login do Gitea (hasło lub token); system je zapamięta,
|
||||||
|
- zainstaluje brakujące narzędzia za Twoją zgodą: Git (Windows: przez winget; macOS: Apple Command Line Tools
|
||||||
|
- po ich instalacji uruchom aktualizację jeszcze raz) oraz `uv` (menedżer Pythona, tylko dla bieżącego
|
||||||
|
użytkownika),
|
||||||
|
- pobierze biblioteki Pythona (1–2 minuty, potrzebny internet).
|
||||||
|
4. Uruchom program plikiem `run_...`.
|
||||||
|
|
||||||
|
**macOS:** jeśli Finder odpowie, że pliku nie można uruchomić (zdarza się po rozpakowaniu zip), otwórz Terminal,
|
||||||
|
wpisz `bash ` (ze spacją), przeciągnij `update_macos.command` do okna i naciśnij Enter. Po pierwszej aktualizacji
|
||||||
|
oba pliki `.command` dają się już otwierać dwuklikiem.
|
||||||
|
|
||||||
|
Zamiast zip można też zrobić `git clone https://gitea.kota-app.com/kkallas/kota-technician-tool.git` i dalej
|
||||||
|
używać tych samych dwóch plików.
|
||||||
|
|
||||||
|
Konkretna starsza wersja (np. do serwisu nietypowego boxa): w folderze narzędzia `git switch --detach v0.8`;
|
||||||
|
kolejna aktualizacja wraca do najnowszej.
|
||||||
|
|
||||||
|
Wszystkie wersje używają jednego środowiska Pythona poza folderem narzędzia:
|
||||||
|
`%LOCALAPPDATA%\KotaTechnicianTool\venv` (Windows), `~/Library/Caches/KotaTechnicianTool/venv` (macOS).
|
||||||
|
Stare środowiska `venv-0.x` z poprzednich wersji można usunąć.
|
||||||
|
|
||||||
Sesje, kopie zapasowe flash i ustawienia są w `~/KotaTechnicianTool` (Windows: `C:\Users\<użytkownik>\KotaTechnicianTool`).
|
Sesje, kopie zapasowe flash i ustawienia są w `~/KotaTechnicianTool` (Windows: `C:\Users\<użytkownik>\KotaTechnicianTool`).
|
||||||
|
|
||||||
@@ -27,15 +58,32 @@ Sesje, kopie zapasowe flash i ustawienia są w `~/KotaTechnicianTool` (Windows:
|
|||||||
Kabel USB musi przenosić dane (nie tylko ładowanie). Przy restartach z komunikatem o brownout użyj innego portu
|
Kabel USB musi przenosić dane (nie tylko ładowanie). Przy restartach z komunikatem o brownout użyj innego portu
|
||||||
lub zasilacza.
|
lub zasilacza.
|
||||||
|
|
||||||
|
## Wi-Fi przez USB (bez otwierania obudowy)
|
||||||
|
|
||||||
|
Zakładka **Wi-Fi (USB)**: podłącz box kablem USB, kliknij **Connect to the box**, wpisz nazwę sieci i hasło,
|
||||||
|
kliknij **Write to the box and connect**. Box zapisuje je na karcie SD, restartuje się i łączy z siecią
|
||||||
|
(zamiast Matter); zakładka pokazuje każdy krok aż do „Connected ... (signal -58 dBm)”.
|
||||||
|
**Read current Wi-Fi settings** pokazuje zapisaną sieć (bez hasła), **Remove Wi-Fi** wraca do Matter.
|
||||||
|
Wymaga firmware z komendami USB (plik `firmware/merged-binary-v13.bin` lub nowszy); starszy firmware
|
||||||
|
wgraj w zakładce **Flash firmware** (tryb App only zachowuje parowanie i ustawienia).
|
||||||
|
|
||||||
## Firmware
|
## Firmware
|
||||||
|
|
||||||
Wgrać można tylko pliki `.bin` z folderu `firmware/`. Lista pokazuje datę kompilacji zapisaną w pliku,
|
Wgrać można tylko pliki `.bin` z folderu `firmware/`. Lista pokazuje datę kompilacji zapisaną w pliku,
|
||||||
najnowszy build jest na górze. Nowy build: wrzuć plik do `firmware/` i kliknij **Refresh list**.
|
najnowszy build jest na górze. Nowy build: wrzuć plik do `firmware/` i kliknij **Refresh list**.
|
||||||
|
|
||||||
## Testy (dla zespołu)
|
## Dla zespołu
|
||||||
|
|
||||||
|
- Praca nad zmianą: gałąź (`git switch -c feature/<nazwa>`) → commity z przechodzącymi testami →
|
||||||
|
`git push -u origin feature/<nazwa>` → pull request na Gitea → merge do `main`.
|
||||||
|
- Wydanie wersji: numer w `pyproject.toml`, `kota_tech/__init__.py` i `uv.lock`, tag `vX.Y`
|
||||||
|
(`git tag -a vX.Y -m "Technician tool vX.Y"`, `git push origin vX.Y`), opis w **Releases** na Gitea.
|
||||||
|
Aktualizacja techników bierze **tylko tagi `v*`** – zmiany w `main` bez tagu do nich nie trafiają.
|
||||||
|
- Nie commitujemy `ENV.TXT` z prawdziwym tokenem ani haseł Wi-Fi.
|
||||||
|
- Testy:
|
||||||
|
|
||||||
```
|
```
|
||||||
uv run --frozen pytest -q
|
uv run --frozen pytest -q
|
||||||
```
|
```
|
||||||
|
|
||||||
Zmiany: `docs/CHANGES-v0.7.md`, `docs/CHANGES-v0.8.md`.
|
Zmiany w wersjach: `docs/CHANGES-v0.*.md`; historia v0.1–v0.8 jest w tagach gita.
|
||||||
@@ -0,0 +1,14 @@
|
|||||||
|
# Technician tool v0.10 - changes (draft)
|
||||||
|
|
||||||
|
- New tab **Wi-Fi (USB)**: write the Wi-Fi name and password to the box's SD card over the USB cable, without
|
||||||
|
opening the case (firmware usb_console, `kota wifi set`). Shows each step: command support check, stored,
|
||||||
|
restart in Wi-Fi mode, connected with signal strength (polls `kota health`). Also reads the stored network
|
||||||
|
(`kota wifi get`, password never shown) and removes it (`kota wifi clear`, back to Matter).
|
||||||
|
- The password is sent hex-encoded, never written to the session log or the service report.
|
||||||
|
- Diagnosis: restarts `usb_wifi_set` / `usb_wifi_clear` are intentional (no "unexpected restart"); box
|
||||||
|
self-report shows the stored Wi-Fi network; `cmd health` replies update the health line.
|
||||||
|
- firmware/: `merged-binary-v13.bin` (usb_console, build 3ae273ec) replaces `merged-binary.bin` (build 4f10989e,
|
||||||
|
still in git tag v0.9). Note: v13 reports the same version 1.0.16 and compile date as the previous build;
|
||||||
|
the firmware team should bump the version for the next build.
|
||||||
|
- error_ids.csv updated from the firmware (E-CON-01).
|
||||||
|
- Test that builds the main window (catches start-up errors).
|
||||||
@@ -0,0 +1,9 @@
|
|||||||
|
# Technician tool v0.9 - changes
|
||||||
|
|
||||||
|
- Two files per system for technicians: `update_windows.bat` / `update_macos.command` (update) and
|
||||||
|
`run_windows.bat` / `run_macos.command` (start).
|
||||||
|
- Update: checks Gitea for the newest release tag `vX.Y`, downloads only what changed (git), shows the list of
|
||||||
|
changes, protects files edited by hand (asks first), connects a folder unpacked from a release zip on first
|
||||||
|
run, installs git / uv when missing (asks first) and brings the Python libraries up to date.
|
||||||
|
- One shared Python environment for all versions: `KotaTechnicianTool/venv` (was `venv-0.x` per version).
|
||||||
|
- A developer copy on a branch is left alone by the update script (use `git pull`).
|
||||||
@@ -0,0 +1,204 @@
|
|||||||
|
# KOTA Sensorbox Technician Tool – instrukcja dla technika
|
||||||
|
|
||||||
|
Program służy do sprawdzenia sensorboxa przez USB, podłączenia go do Wi-Fi bez otwierania obudowy,
|
||||||
|
wgrania firmware i przygotowania karty SD. Działa na Windows 10/11 i macOS 13 lub nowszym.
|
||||||
|
|
||||||
|
> ⚠️ **Między boxem a komputerem musi być po drodze wtyczka USB 2.0 typu A (prostokątna).**
|
||||||
|
> Może to być kabel USB 2.0 A wpięty do komputera albo do huba – hub jest w porządku.
|
||||||
|
> Połączenie wyłącznie przez USB-C (kabel USB-C–USB-C, przejściówka USB-C bez odcinka USB 2.0 A)
|
||||||
|
> często kończy się tym, że box nie jest widoczny w systemie („Unknown USB Device”) albo restartuje się przez
|
||||||
|
> spadki napięcia. Kabel musi przenosić dane – kabel „tylko do ładowania” nie zadziała.
|
||||||
|
|
||||||
|
---
|
||||||
|
|
||||||
|
## Spis treści
|
||||||
|
|
||||||
|
1. [Instalacja (raz na komputer)](#1-instalacja-raz-na-komputer)
|
||||||
|
2. [Aktualizacja i uruchomienie](#2-aktualizacja-i-uruchomienie)
|
||||||
|
3. [Podłączenie boxa](#3-podłączenie-boxa)
|
||||||
|
4. [Diagnoza boxa – zakładka Serial monitor](#4-diagnoza-boxa--zakładka-serial-monitor)
|
||||||
|
5. [Sprawdzenie krok po kroku – Guided troubleshooting](#5-sprawdzenie-krok-po-kroku--guided-troubleshooting)
|
||||||
|
6. [Wi-Fi przez USB – zakładka Wi-Fi (USB)](#6-wi-fi-przez-usb--zakładka-wi-fi-usb)
|
||||||
|
7. [Wgrywanie firmware – zakładka Flash firmware](#7-wgrywanie-firmware--zakładka-flash-firmware)
|
||||||
|
8. [Karta SD – zakładka SD card](#8-karta-sd--zakładka-sd-card)
|
||||||
|
9. [Raport serwisowy](#9-raport-serwisowy)
|
||||||
|
10. [Co oznacza kolor diody](#10-co-oznacza-kolor-diody)
|
||||||
|
11. [Najczęstsze problemy](#11-najczęstsze-problemy)
|
||||||
|
|
||||||
|
---
|
||||||
|
|
||||||
|
## 1. Instalacja (raz na komputer)
|
||||||
|
|
||||||
|
1. Na https://gitea.kota-app.com/kkallas/kota-technician-tool otwórz **Releases** i przy najnowszej wersji
|
||||||
|
pobierz **Source Code (ZIP)**.
|
||||||
|
2. Rozpakuj do zwykłego folderu, np. `Dokumenty\KOTA\technician-tool`
|
||||||
|
(macOS: `~/Documents/KOTA/technician-tool`). **Nie** do folderu Google Drive ani OneDrive.
|
||||||
|
3. Uruchom plik aktualizacji dla swojego systemu (patrz rozdział 2). Za pierwszym razem:
|
||||||
|
- zapyta o login do Gitea (hasło lub token) – system go zapamięta,
|
||||||
|
- za Twoją zgodą zainstaluje brakujące narzędzia (Git, `uv`),
|
||||||
|
- pobierze biblioteki (1–2 minuty, potrzebny internet).
|
||||||
|
|
||||||
|
**macOS:** jeśli Finder nie chce otworzyć pliku `.command`, otwórz Terminal, wpisz `bash ` (ze spacją),
|
||||||
|
przeciągnij plik do okna Terminala i naciśnij Enter. Po pierwszej aktualizacji dwuklik zaczyna działać.
|
||||||
|
|
||||||
|
## 2. Aktualizacja i uruchomienie
|
||||||
|
|
||||||
|
W folderze narzędzia potrzebujesz tylko dwóch plików:
|
||||||
|
|
||||||
|
| System | Aktualizacja | Uruchomienie |
|
||||||
|
|---|---|---|
|
||||||
|
| Windows | `update_windows.bat` | `run_windows.bat` |
|
||||||
|
| macOS | `update_macos.command` | `run_macos.command` |
|
||||||
|
|
||||||
|
- **Aktualizacja** – uruchom przed wyjazdem do klienta albo gdy zespół ogłosi nową wersję. Pobiera tylko zmiany
|
||||||
|
i pokazuje ich listę. Wymaga internetu.
|
||||||
|
- **Uruchomienie** – otwiera program. Działa bez internetu.
|
||||||
|
|
||||||
|
Po uruchomieniu otwiera się zakładka **Quick start** ze skróconą instrukcją i tabelą kolorów diody:
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
## 3. Podłączenie boxa
|
||||||
|
|
||||||
|
1. Włącz box włącznikiem z tyłu obudowy (**ON**). Samo zasilanie z laptopa może nie wystarczyć, szczególnie
|
||||||
|
przy słabej baterii.
|
||||||
|
2. Podłącz box tak, żeby **po drodze była wtyczka USB 2.0 typu A** – do portu USB-A komputera albo do huba
|
||||||
|
(patrz ostrzeżenie na górze).
|
||||||
|
3. Na liście portów box widać jako:
|
||||||
|
- Windows: `COMx - Sensorbox (native USB) [MAC]`
|
||||||
|
- macOS: `/dev/cu.usbmodemXXXX - Sensorbox (native USB) [MAC]`
|
||||||
|
|
||||||
|
MAC (np. `14:C1:9F:57:72:48`) to numer identyfikacyjny boxa – zapisz go w raporcie.
|
||||||
|
|
||||||
|
Jeśli boxa nie ma na liście, zobacz [Najczęstsze problemy](#11-najczęstsze-problemy).
|
||||||
|
|
||||||
|
## 4. Diagnoza boxa – zakładka Serial monitor
|
||||||
|
|
||||||
|
1. Wybierz port sensorboxa i kliknij **Connect**.
|
||||||
|
2. Kliknij **Reset & capture** – box uruchomi się ponownie, a program nagra cały start.
|
||||||
|
3. Poczekaj ok. **70 sekund** – co minutę box wysyła raport stanu (health), a program uzupełnia diagnozę.
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
Po lewej jest log z boxa, po prawej panel **Diagnosis** – czytaj go od góry:
|
||||||
|
|
||||||
|
| Element | Co oznacza |
|
||||||
|
|---|---|
|
||||||
|
| **Pasek na górze** | Werdykt: zielony = wszystko działa, żółty/czerwony = główny problem. |
|
||||||
|
| **Status LED should be** | Jaki kolor i wzór powinna mieć dioda. **Porównaj z boxem** – jeśli jest inaczej, zanotuj to. |
|
||||||
|
| **Firmware** | Wersja i build firmware na boxie. |
|
||||||
|
| **Box self-report** | Co box sam o sobie zgłasza: czujniki (I2C), karta SD, zegar, Matter, mikrofon, Wi-Fi, stan co minutę. ✔ = OK, ! = uwaga, ✖ = błąd. |
|
||||||
|
| **Start-up progress** | Kolejne etapy startu z czasem w sekundach. Szare kółko = etap jeszcze nieosiągnięty. |
|
||||||
|
| **Findings** | Znalezione problemy – najpierw przyczyny, pod nimi (↳) ich skutki. Kliknij, by zobaczyć, **co to znaczy** i **co zrobić**. |
|
||||||
|
|
||||||
|
Przydatne przyciski:
|
||||||
|
- **Show: KOTA diagnostics + errors** – pokazuje w logu tylko najważniejsze linie.
|
||||||
|
- **Copy report** – kopiuje diagnozę jako tekst (np. do maila).
|
||||||
|
- **Open logs folder** – pełne logi każdej sesji (do wysłania zespołowi firmware).
|
||||||
|
|
||||||
|
## 5. Sprawdzenie krok po kroku – Guided troubleshooting
|
||||||
|
|
||||||
|
Obok zakładki **Diagnosis** jest **Guided troubleshooting**. Program proponuje sprawdzenia pasujące do
|
||||||
|
znalezionych problemów. Zacznij od **Quick check – start here**:
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
Program zadaje pytania (np. jaki kolor ma dioda) i na bieżąco sprawdza log boxa. Odpowiedzi trafiają do raportu:
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
## 6. Wi-Fi przez USB – zakładka Wi-Fi (USB)
|
||||||
|
|
||||||
|
Pozwala podłączyć box do sieci Wi-Fi **bez otwierania obudowy i wyjmowania karty SD**.
|
||||||
|
Wymaga firmware z komendami USB – jeśli program zgłosi „The box does not answer USB commands”, najpierw wgraj
|
||||||
|
najnowszy firmware (rozdział 7).
|
||||||
|
|
||||||
|
1. Kliknij **Connect to the box** (jeśli box nie jest już połączony w Serial monitor).
|
||||||
|
2. Opcjonalnie **Read current Wi-Fi settings** – pokazuje zapisaną sieć (hasła nigdy nie pokazuje).
|
||||||
|
3. Wpisz **nazwę sieci (SSID)** dokładnie jak na routerze i **hasło** (8–63 znaki).
|
||||||
|
Sieć musi być **2,4 GHz** i mieć hasło.
|
||||||
|
4. Kliknij **Write to the box and connect** i potwierdź.
|
||||||
|
5. Obserwuj listę kroków. Box zapisuje ustawienia, restartuje się i łączy z siecią. Na końcu zobaczysz
|
||||||
|
**„Connected to '…' (signal … dBm)”**:
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
- Siła sygnału: powyżej −70 dBm jest dobrze, poniżej −75 dBm połączenie może się zrywać – przestaw box lub router.
|
||||||
|
- Po zapisaniu Wi-Fi box **nie używa Matter**. Powrót do Matter: **Remove Wi-Fi (back to Matter)**.
|
||||||
|
- Jeśli box nie połączy się w 90 s, sprawdź nazwę sieci, hasło i czy to sieć 2,4 GHz. Ustawienia zostają na
|
||||||
|
boxie, a box sam próbuje dalej.
|
||||||
|
|
||||||
|
## 7. Wgrywanie firmware – zakładka Flash firmware
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
1. **Sensorbox** – wybierz port. Program pokazuje, jaki firmware jest teraz na boxie i czy wybrany plik jest
|
||||||
|
nowszy.
|
||||||
|
2. **Firmware** – wybierz plik. Lista pokazuje **datę kompilacji**, najnowszy jest na górze. Dostępne są tylko
|
||||||
|
pliki z folderu `firmware` narzędzia (aktualizuje je `update_…`).
|
||||||
|
3. **Co wgrać:**
|
||||||
|
- **App only** (zalecane przy naprawach) – wymienia tylko program. Parowanie Matter, rejestracja aktualizacji
|
||||||
|
i ustawienia **zostają**.
|
||||||
|
- **Full image** – tylko dla nowych lub całkowicie wyczyszczonych płytek. **Kasuje parowanie Matter** – box
|
||||||
|
trzeba potem sparować od nowa. Wymaga zaznaczenia potwierdzenia.
|
||||||
|
- **Back up…** – kopia całej pamięci boxa przed wgraniem (ok. 3 minuty). Zalecane przy Full image.
|
||||||
|
4. Kliknij **Start flashing**. Nie odłączaj kabla, dopóki nie pojawi się **„Success”** – program sam uruchomi
|
||||||
|
box ponownie i sprawdzi, czy działa nowy firmware.
|
||||||
|
|
||||||
|
Jeśli wgrywanie nie może się połączyć: inny port/kabel (z wtyczką USB 2.0 A po drodze), zamknij inne programy używające
|
||||||
|
portu. Ostateczność (trzeba otworzyć obudowę): przytrzymaj **BOOT**, naciśnij i puść **RESET**, puść **BOOT**,
|
||||||
|
kliknij Start jeszcze raz.
|
||||||
|
|
||||||
|
## 8. Karta SD – zakładka SD card
|
||||||
|
|
||||||
|
Karta SD jest **wewnątrz obudowy**. Ta zakładka służy do przygotowania nowej karty albo naprawy uszkodzonej.
|
||||||
|
Do zmiany samego Wi-Fi używaj zakładki **Wi-Fi (USB)** – nie trzeba wtedy otwierać obudowy.
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
1. **Settings** – ustawienia wczytują się z pliku od zespołu (INFLUX_URL, INFLUX_TOKEN). Nie zmieniaj ich bez
|
||||||
|
potrzeby. Opcjonalnie możesz wpisać Wi-Fi (sieć i hasło).
|
||||||
|
2. Włóż kartę do czytnika w komputerze. Na liście pojawiają się tylko karty wymienne – dyski komputera nie są
|
||||||
|
pokazywane.
|
||||||
|
3. **Check card** – sprawdza kartę bez zmieniania czegokolwiek.
|
||||||
|
**Write ENV.TXT only** – zapisuje ustawienia, zostawia pomiary na karcie.
|
||||||
|
**Format card and write ENV.TXT** – kasuje całą kartę (FAT32) i zapisuje ustawienia.
|
||||||
|
4. Program sam wysuwa kartę – dopiero wtedy ją wyjmij.
|
||||||
|
|
||||||
|
## 9. Raport serwisowy
|
||||||
|
|
||||||
|
Kliknij **Service report…** w zakładce Serial monitor. Otworzy się strona boxa w systemie KOTA Serwis
|
||||||
|
z wpisaną diagnozą (werdykt, stan boxa, etapy startu, problemy z liczbą wystąpień i czasem). Sprawdź treść,
|
||||||
|
dopisz lokalizację i uwagi, kliknij **Zapisz**.
|
||||||
|
|
||||||
|
Zaznaczenie **Open service report on disconnect** otwiera raport automatycznie po rozłączeniu boxa.
|
||||||
|
|
||||||
|
## 10. Co oznacza kolor diody
|
||||||
|
|
||||||
|
| Kolor | Wzór | Znaczenie | Co zrobić |
|
||||||
|
|---|---|---|---|
|
||||||
|
| Zielony | ciągły | Wszystko OK | Nic |
|
||||||
|
| Cyan (turkusowy) | pulsuje / szybko miga | Nie sparowany w Matter / telefon łączy się | Sparuj w aplikacji Matter albo ustaw Wi-Fi przez USB |
|
||||||
|
| Biały | szybko miga / ciągły / pulsuje | Błąd karty SD lub ENV.TXT / reset fabryczny / tryb konfiguracji Wi-Fi | Sprawdź kartę SD (zakładka SD card) |
|
||||||
|
| Czerwony | 1–6 błysków | Awaria czujnika: 1 BME688, 2 SEN66, 3 AS7341, 4 mikrofon, 5 flicker, 6 test po aktualizacji | Policz błyski, sprawdź przewód tego czujnika |
|
||||||
|
| Czerwony | ciągły | Inny błąd wewnętrzny / brak pamięci | Zapisz log, wyślij zespołowi |
|
||||||
|
| Niebieski | 1 / 2 błyski | Zegar RTC nie odpowiada / zablokowana magistrala I2C | Sprawdź przewód I2C między płytkami |
|
||||||
|
| Fioletowy | ciągły / miga | Brak sieci / serwer odrzuca box (złe ENV.TXT) | Sprawdź Wi-Fi / wgraj poprawne ENV.TXT |
|
||||||
|
| Żółty | miga coraz szybciej | Pobiera aktualizację | Nie wyłączaj, poczekaj |
|
||||||
|
| Pomarańczowy | ciągły | Test po aktualizacji (~2,5 min) | Poczekaj |
|
||||||
|
| Zgaszona | – | Firmware nie działa lub brak zasilania | Sprawdź włącznik i kabel; wgraj firmware |
|
||||||
|
|
||||||
|
Mała dioda obok (heartbeat): miga raz na sekundę = online, podwójnie = offline, nie miga = firmware stoi.
|
||||||
|
|
||||||
|
## 11. Najczęstsze problemy
|
||||||
|
|
||||||
|
| Objaw | Przyczyna | Co zrobić |
|
||||||
|
|---|---|---|
|
||||||
|
| Boxa nie ma na liście portów | Brak wtyczki USB 2.0 A po drodze (samo USB-C), kabel tylko do ładowania, box wyłączony | **Połączenie z wtyczką USB 2.0 typu A** (do komputera lub huba), kabel z transmisją danych, włącznik ON, odłącz i podłącz ponownie. W Windows sprawdź Menedżer urządzeń – „Unknown USB Device” oznacza problem z kablem/portem/zasilaniem. |
|
||||||
|
| Diagnoza: „Power supply voltage drops (brown-out)”, box się restartuje | Za słabe zasilanie | Włącznik boxa ON, inny port USB-A, zasilacz; naładuj baterię |
|
||||||
|
| „The box does not answer USB commands” (Wi-Fi USB) | Stary firmware | Wgraj najnowszy firmware (App only) |
|
||||||
|
| „Clock chip was stopped at start-up” | Pusta bateria zegara RTC | Zegar ustawi się sam po połączeniu z internetem; przy powtórce wymień baterię pastylkową |
|
||||||
|
| „Box is not connected to Wi-Fi (not commissioned in Matter)” | Box nie jest sparowany | Sparuj w Matter (przycisk **Matter pairing QR code…**) albo ustaw Wi-Fi przez USB |
|
||||||
|
| Wgrywanie nie może połączyć się z boxem | Port zajęty lub zły kabel | Zamknij inne programy, inny kabel/port; ostatecznie BOOT + RESET (rozdział 7) |
|
||||||
|
|
||||||
|
Jeśli problem się powtarza: **Open logs folder** → wyślij plik sesji zespołowi firmware razem z MAC boxa.
|
||||||
Binary file not shown.
Binary file not shown.
|
After Width: | Height: | Size: 86 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 250 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 192 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 198 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 59 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 49 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 35 KiB |
Binary file not shown.
@@ -1,3 +1,3 @@
|
|||||||
"""KOTA sensorbox technician tool."""
|
"""KOTA sensorbox technician tool."""
|
||||||
|
|
||||||
__version__ = "0.8.0"
|
__version__ = "0.9.0"
|
||||||
@@ -335,6 +335,8 @@ class DiagnosticsEngine:
|
|||||||
self.matter_qr: str | None = None # "KOTA: matter ... qr=MT:..."
|
self.matter_qr: str | None = None # "KOTA: matter ... qr=MT:..."
|
||||||
self.matter_manual: str | None = None
|
self.matter_manual: str | None = None
|
||||||
self.kota_seen = False # firmware prints KOTA: lines
|
self.kota_seen = False # firmware prints KOTA: lines
|
||||||
|
self.console_api: int | None = None # "cmd ping ... api=N": box accepts USB commands
|
||||||
|
self.wifi_config: dict[str, str] | None = None # last "cmd wifi_get" reply (never a password)
|
||||||
self._reset_led_state()
|
self._reset_led_state()
|
||||||
|
|
||||||
def _reset_led_state(self) -> None:
|
def _reset_led_state(self) -> None:
|
||||||
@@ -714,6 +716,20 @@ class DiagnosticsEngine:
|
|||||||
fd = self._custom(key, Severity[sev.upper()], title, meaning, actions, expl)
|
fd = self._custom(key, Severity[sev.upper()], title, meaning, actions, expl)
|
||||||
self._touch(fd, line)
|
self._touch(fd, line)
|
||||||
|
|
||||||
|
def _kota_cmd(self, line: LogLine, f: dict[str, str]) -> None:
|
||||||
|
"""Replies to commands sent by this tool (firmware usb_console)."""
|
||||||
|
name = line.words[0] if line.words else ""
|
||||||
|
if f.get("ok") != "1":
|
||||||
|
return # the Wi-Fi tab reports failures itself
|
||||||
|
if name == "ping":
|
||||||
|
api = f.get("api", "")
|
||||||
|
self.console_api = int(api) if api.isdigit() else None
|
||||||
|
elif name == "health":
|
||||||
|
self.boot.kota["health"] = line # same fields as the periodic health line
|
||||||
|
self._kota_health(line, f)
|
||||||
|
elif name == "wifi_get":
|
||||||
|
self.wifi_config = {k: f.get(k, "?") for k in ("ssid", "password_set", "mode")}
|
||||||
|
|
||||||
def _kota_led(self, line: LogLine, f: dict[str, str]) -> None:
|
def _kota_led(self, line: LogLine, f: dict[str, str]) -> None:
|
||||||
if "previous_boot" in line.words:
|
if "previous_boot" in line.words:
|
||||||
code = f.get("code", "0")
|
code = f.get("code", "0")
|
||||||
@@ -845,6 +861,12 @@ class DiagnosticsEngine:
|
|||||||
if ln := k.get("mic"):
|
if ln := k.get("mic"):
|
||||||
on = ln.fields.get("enabled") == "1"
|
on = ln.fields.get("enabled") == "1"
|
||||||
out.append(("Microphone", "on" if on else "switched OFF (switch on the back)", "ok" if on else "info"))
|
out.append(("Microphone", "on" if on else "switched OFF (switch on the back)", "ok" if on else "info"))
|
||||||
|
if self.wifi_config:
|
||||||
|
from ..serialio.commands import unhex_utf8
|
||||||
|
w = self.wifi_config
|
||||||
|
ssid = unhex_utf8(w["ssid"])
|
||||||
|
out.append(("Wi-Fi config", (f"network '{ssid}', password {'set' if w['password_set'] == '1' else 'NOT set'}"
|
||||||
|
if ssid else "no network on the SD card") + f", mode {w['mode']}", "info"))
|
||||||
if ln := k.get("health"):
|
if ln := k.get("health"):
|
||||||
f = ln.fields
|
f = ln.fields
|
||||||
wifi = f.get("wifi", "?")
|
wifi = f.get("wifi", "?")
|
||||||
|
|||||||
@@ -191,3 +191,4 @@ E-GATH-01,GATH,error,Failed to take line protocol mutex,Internal error - send th
|
|||||||
E-GATH-02,GATH,error,Failed to get line protocol from sensor,Device ran out of memory; restart it and send the log to the firmware team
|
E-GATH-02,GATH,error,Failed to get line protocol from sensor,Device ran out of memory; restart it and send the log to the firmware team
|
||||||
E-GATH-03,GATH,error,Failed to create task for sensor,Internal error - send the log to the firmware team
|
E-GATH-03,GATH,error,Failed to create task for sensor,Internal error - send the log to the firmware team
|
||||||
E-GATH-04,GATH,error,Failed to create main gather task,Internal error - send the log to the firmware team
|
E-GATH-04,GATH,error,Failed to create main gather task,Internal error - send the log to the firmware team
|
||||||
|
E-CON-01,CON,error,Failed to install USB-Serial-JTAG driver: %s,Internal error - send the log to the firmware team
|
||||||
|
@@ -39,6 +39,7 @@ I2C_DEVICES = {"0x39": "AS7341", "0x68": "DS1307", "0x6B": "SEN66", "0x76": "BME
|
|||||||
INTENTIONAL_RESTARTS = {
|
INTENTIONAL_RESTARTS = {
|
||||||
"ota_update", "button_provisioning_abort", "button_wifi_cleared",
|
"ota_update", "button_provisioning_abort", "button_wifi_cleared",
|
||||||
"button_provisioning_toggle", "provisioning_saved",
|
"button_provisioning_toggle", "provisioning_saved",
|
||||||
|
"usb_wifi_set", "usb_wifi_clear", # Wi-Fi changed from the technician tool (usb_console)
|
||||||
}
|
}
|
||||||
|
|
||||||
MODULES = {
|
MODULES = {
|
||||||
|
|||||||
@@ -26,7 +26,7 @@ HINTS = [
|
|||||||
"The box did not enter flashing mode by itself. Open the case, hold the BOOT button, press and release RESET, "
|
"The box did not enter flashing mode by itself. Open the case, hold the BOOT button, press and release RESET, "
|
||||||
"release BOOT, then press Start again."),
|
"release BOOT, then press Start again."),
|
||||||
(re.compile(r"device reports readiness to read but returned no data|The port disappeared|device disconnected", re.I),
|
(re.compile(r"device reports readiness to read but returned no data|The port disappeared|device disconnected", re.I),
|
||||||
"The USB connection dropped. Use a short data-capable USB cable directly on the laptop (no hub) and try again."),
|
"The USB connection dropped. Use a data-capable cable with a USB 2.0 type-A plug on the way to the laptop (not USB-C only) and try again."),
|
||||||
(re.compile(r"Invalid head of packet|timed out", re.I),
|
(re.compile(r"Invalid head of packet|timed out", re.I),
|
||||||
"Communication errors. Try another USB cable or port."),
|
"Communication errors. Try another USB cable or port."),
|
||||||
]
|
]
|
||||||
|
|||||||
@@ -0,0 +1,283 @@
|
|||||||
|
"""Commands to the box over the USB serial port (firmware with usb_console, api=1).
|
||||||
|
|
||||||
|
Protocol (kota-sensorboard main/usb_console.hpp): ASCII lines "kota ...",
|
||||||
|
one reply line each, logged as "KOTA: cmd <name> ok=1|0 [key=value ...]":
|
||||||
|
|
||||||
|
kota ping -> cmd ping ok=1 fw=<version> api=1
|
||||||
|
kota health -> cmd health ok=1 <health fields> | ok=0 err=not_ready
|
||||||
|
kota wifi get -> cmd wifi_get ok=1 ssid=<hex|-> password_set=0|1 mode=...
|
||||||
|
kota wifi set <ssid_hex> <pass_hex> -> cmd wifi_set ok=1 restart=1, then restart (usb_wifi_set)
|
||||||
|
kota wifi clear -> cmd wifi_clear ok=1 restart=1, then restart (usb_wifi_clear)
|
||||||
|
|
||||||
|
Firmware without the console never answers. The password is only ever sent
|
||||||
|
hex-encoded and is never written to the log by the box or by this tool.
|
||||||
|
|
||||||
|
WifiFlow runs a whole "write / clear Wi-Fi" job as a small state machine
|
||||||
|
driven by `feed(line)` and `tick(now)`, so it is testable without Qt or a box.
|
||||||
|
"""
|
||||||
|
|
||||||
|
from __future__ import annotations
|
||||||
|
|
||||||
|
import enum
|
||||||
|
import time
|
||||||
|
from collections.abc import Callable
|
||||||
|
from dataclasses import dataclass, field
|
||||||
|
|
||||||
|
from ..core.logline import LineKind, LogLine
|
||||||
|
|
||||||
|
API_VERSION = 1
|
||||||
|
|
||||||
|
# Technician-facing text for the firmware's err= codes.
|
||||||
|
ERRORS = {
|
||||||
|
"bad_args": "The box did not understand the command (tool/firmware mismatch).",
|
||||||
|
"bad_hex": "The box could not decode the settings (tool/firmware mismatch).",
|
||||||
|
"bad_char": "The name or password contains a line break.",
|
||||||
|
"ssid_length": "The network name must be 1-32 bytes.",
|
||||||
|
"password_length": "The password must be 8-63 characters.",
|
||||||
|
"sd_not_mounted": "The box cannot read its SD card, so it cannot store the settings.",
|
||||||
|
"write_failed": "Writing ENV.TXT on the SD card failed.",
|
||||||
|
"verify_failed": "ENV.TXT did not read back correctly after writing.",
|
||||||
|
"unknown_command": "This firmware does not know the command.",
|
||||||
|
"not_ready": "The box is still starting; try again in a few seconds.",
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
def hex_utf8(text: str) -> str:
|
||||||
|
return text.encode("utf-8").hex()
|
||||||
|
|
||||||
|
|
||||||
|
def unhex_utf8(value: str) -> str | None:
|
||||||
|
if not value or value == "-":
|
||||||
|
return None
|
||||||
|
try:
|
||||||
|
return bytes.fromhex(value).decode("utf-8", errors="replace")
|
||||||
|
except ValueError:
|
||||||
|
return None
|
||||||
|
|
||||||
|
|
||||||
|
def validate_wifi(ssid: str, password: str) -> list[str]:
|
||||||
|
"""Same limits as the firmware (usb_console.cpp); empty list = OK."""
|
||||||
|
problems = []
|
||||||
|
if not ssid:
|
||||||
|
problems.append("Enter the Wi-Fi network name (SSID).")
|
||||||
|
elif len(ssid.encode("utf-8")) > 32:
|
||||||
|
problems.append("The network name is longer than 32 bytes.")
|
||||||
|
if not 8 <= len(password.encode("utf-8")) <= 63:
|
||||||
|
problems.append("The password must be 8-63 characters (WPA2). Open networks are not supported.")
|
||||||
|
if any(c in ssid + password for c in "\r\n\0"):
|
||||||
|
problems.append("The name or password contains a line break.")
|
||||||
|
return problems
|
||||||
|
|
||||||
|
|
||||||
|
def wifi_set_command(ssid: str, password: str) -> str:
|
||||||
|
problems = validate_wifi(ssid, password)
|
||||||
|
if problems:
|
||||||
|
raise ValueError(" ".join(problems))
|
||||||
|
return f"kota wifi set {hex_utf8(ssid)} {hex_utf8(password)}"
|
||||||
|
|
||||||
|
|
||||||
|
def loggable(command: str) -> str:
|
||||||
|
"""The command as it may appear in the session log: never the password."""
|
||||||
|
parts = command.split()
|
||||||
|
if parts[:3] == ["kota", "wifi", "set"] and len(parts) == 5:
|
||||||
|
return f"kota wifi set (network '{unhex_utf8(parts[3])}', password hidden)"
|
||||||
|
return command
|
||||||
|
|
||||||
|
|
||||||
|
@dataclass(frozen=True)
|
||||||
|
class Reply:
|
||||||
|
name: str # ping | health | wifi_get | wifi_set | wifi_clear | unknown
|
||||||
|
ok: bool
|
||||||
|
fields: dict[str, str]
|
||||||
|
|
||||||
|
@property
|
||||||
|
def error(self) -> str:
|
||||||
|
code = self.fields.get("err", "")
|
||||||
|
return ERRORS.get(code, f"The box reported an error ({code or 'unknown'}).")
|
||||||
|
|
||||||
|
|
||||||
|
def parse_reply(line: LogLine) -> Reply | None:
|
||||||
|
"""'I (5) KOTA: cmd wifi_set ok=1 restart=1' -> Reply('wifi_set', True, {...})."""
|
||||||
|
if line.kind != LineKind.KOTA or line.record != "cmd" or not line.words:
|
||||||
|
return None
|
||||||
|
return Reply(line.words[0], line.fields.get("ok") == "1", dict(line.fields))
|
||||||
|
|
||||||
|
|
||||||
|
@dataclass(frozen=True)
|
||||||
|
class WifiInfo:
|
||||||
|
"""What `kota wifi get` reported."""
|
||||||
|
ssid: str | None
|
||||||
|
password_set: bool
|
||||||
|
mode: str
|
||||||
|
|
||||||
|
@classmethod
|
||||||
|
def from_reply(cls, r: Reply) -> WifiInfo:
|
||||||
|
return cls(unhex_utf8(r.fields.get("ssid", "-")), r.fields.get("password_set") == "1",
|
||||||
|
r.fields.get("mode", "?"))
|
||||||
|
|
||||||
|
def describe(self) -> str:
|
||||||
|
mode = {"wifi": "local Wi-Fi from the SD card", "matter": "Matter (Wi-Fi given by the Matter app)",
|
||||||
|
"provisioning": "Wi-Fi setup portal"}.get(self.mode, self.mode)
|
||||||
|
net = f"network '{self.ssid}'" + (", password set" if self.password_set else ", NO password")
|
||||||
|
return f"Mode: {mode}. " + (net if self.ssid else "No network stored on the SD card.")
|
||||||
|
|
||||||
|
|
||||||
|
# ------------------------------------------------------------------ flows
|
||||||
|
|
||||||
|
class Step(str, enum.Enum):
|
||||||
|
PING = "Checking the box accepts USB commands"
|
||||||
|
READ = "Reading the Wi-Fi settings"
|
||||||
|
SEND = "Storing the settings on the box's SD card"
|
||||||
|
RESTART = "Waiting for the box to restart"
|
||||||
|
CONNECT = "Waiting for the box to join the Wi-Fi network"
|
||||||
|
DONE = "Done"
|
||||||
|
FAILED = "Failed"
|
||||||
|
|
||||||
|
|
||||||
|
@dataclass
|
||||||
|
class FlowEvent:
|
||||||
|
step: Step
|
||||||
|
text: str
|
||||||
|
ok: bool | None = None # None = in progress, True = finished OK, False = failed
|
||||||
|
|
||||||
|
|
||||||
|
PING_TIMEOUT_S = 3.0
|
||||||
|
REPLY_TIMEOUT_S = 8.0
|
||||||
|
RESTART_TIMEOUT_S = 40.0
|
||||||
|
CONNECT_TIMEOUT_S = 90.0
|
||||||
|
HEALTH_POLL_S = 5.0
|
||||||
|
|
||||||
|
|
||||||
|
@dataclass
|
||||||
|
class WifiFlow:
|
||||||
|
"""One technician job: "read", "set" (ssid+password) or "clear".
|
||||||
|
|
||||||
|
`send(text)` writes one command line to the box (returns False when the
|
||||||
|
port is not connected); `on_event` reports progress for the UI.
|
||||||
|
"""
|
||||||
|
action: str
|
||||||
|
send: Callable[[str], bool]
|
||||||
|
on_event: Callable[[FlowEvent], None]
|
||||||
|
ssid: str = ""
|
||||||
|
password: str = ""
|
||||||
|
now: Callable[[], float] = time.monotonic
|
||||||
|
step: Step = Step.PING
|
||||||
|
info: WifiInfo | None = None
|
||||||
|
_deadline: float = 0.0
|
||||||
|
_next_poll: float = 0.0
|
||||||
|
_events: list[FlowEvent] = field(default_factory=list)
|
||||||
|
|
||||||
|
@property
|
||||||
|
def finished(self) -> bool:
|
||||||
|
return self.step in (Step.DONE, Step.FAILED)
|
||||||
|
|
||||||
|
def start(self) -> None:
|
||||||
|
if self.action == "set":
|
||||||
|
problems = validate_wifi(self.ssid, self.password)
|
||||||
|
if problems:
|
||||||
|
return self._fail(" ".join(problems))
|
||||||
|
self._go(Step.PING, "kota ping", PING_TIMEOUT_S)
|
||||||
|
|
||||||
|
def cancel(self) -> None:
|
||||||
|
if not self.finished:
|
||||||
|
self._fail("Cancelled.")
|
||||||
|
|
||||||
|
# -------------------------------------------------------- driving
|
||||||
|
def feed(self, line: LogLine) -> None:
|
||||||
|
if self.finished:
|
||||||
|
return
|
||||||
|
if self.step == Step.RESTART and line.kind == LineKind.KOTA and line.record == "boot":
|
||||||
|
return self._on_boot(line.fields)
|
||||||
|
r = parse_reply(line)
|
||||||
|
if r is None:
|
||||||
|
return
|
||||||
|
if self.step == Step.PING and r.name == "ping":
|
||||||
|
if not r.ok or int(r.fields.get("api", "0") or 0) < API_VERSION:
|
||||||
|
return self._fail("The box answered, but its command version is not supported.")
|
||||||
|
self._emit(f"Firmware {r.fields.get('fw', '?')} accepts USB commands.", True)
|
||||||
|
if self.action == "read":
|
||||||
|
return self._go(Step.READ, "kota wifi get", REPLY_TIMEOUT_S)
|
||||||
|
if self.action == "set":
|
||||||
|
return self._go(Step.SEND, wifi_set_command(self.ssid, self.password), REPLY_TIMEOUT_S)
|
||||||
|
return self._go(Step.SEND, "kota wifi clear", REPLY_TIMEOUT_S)
|
||||||
|
if self.step == Step.READ and r.name == "wifi_get":
|
||||||
|
if not r.ok:
|
||||||
|
return self._fail(r.error)
|
||||||
|
self.info = WifiInfo.from_reply(r)
|
||||||
|
return self._finish(self.info.describe())
|
||||||
|
if self.step == Step.SEND and r.name in ("wifi_set", "wifi_clear"):
|
||||||
|
if not r.ok:
|
||||||
|
return self._fail(r.error)
|
||||||
|
self._emit("The box stored the settings and is restarting.", True)
|
||||||
|
self.step, self._deadline = Step.RESTART, self.now() + RESTART_TIMEOUT_S
|
||||||
|
return self._emit(Step.RESTART.value + "...")
|
||||||
|
if self.step == Step.CONNECT and r.name == "health" and r.ok:
|
||||||
|
return self._on_health(r.fields)
|
||||||
|
|
||||||
|
def tick(self) -> None:
|
||||||
|
"""Call periodically (e.g. every 0.5 s): timeouts and health polling."""
|
||||||
|
if self.finished:
|
||||||
|
return
|
||||||
|
t = self.now()
|
||||||
|
if self.step == Step.CONNECT and t >= self._next_poll:
|
||||||
|
self._next_poll = t + HEALTH_POLL_S
|
||||||
|
self.send("kota health")
|
||||||
|
if t < self._deadline:
|
||||||
|
return
|
||||||
|
if self.step == Step.PING:
|
||||||
|
self._fail("The box does not answer USB commands. It needs firmware with the USB console "
|
||||||
|
"(Flash firmware tab), or it is still starting - try again in 10 s.")
|
||||||
|
elif self.step == Step.RESTART:
|
||||||
|
self._fail("The box stored the settings but no restart was seen. Press Reset & capture in the "
|
||||||
|
"Serial monitor and check the Diagnosis panel.")
|
||||||
|
elif self.step == Step.CONNECT:
|
||||||
|
self._fail(f"The box did not join '{self.ssid}' within {int(CONNECT_TIMEOUT_S)} s. Check the network "
|
||||||
|
"name and password, that it is a 2.4 GHz network and that it is in range. The settings stay "
|
||||||
|
"on the box; it keeps retrying.")
|
||||||
|
else:
|
||||||
|
self._fail("The box did not answer. Check the USB connection and try again.")
|
||||||
|
|
||||||
|
# -------------------------------------------------------- internals
|
||||||
|
def _on_boot(self, f: dict[str, str]) -> None:
|
||||||
|
mode, last = f.get("mode", "?"), f.get("last_restart", "?")
|
||||||
|
want = "usb_wifi_set" if self.action == "set" else "usb_wifi_clear"
|
||||||
|
if last != want:
|
||||||
|
return self._fail(f"The box restarted for another reason ({last}); the settings may not be applied.")
|
||||||
|
self._emit(f"Restarted in {mode} mode.", True)
|
||||||
|
if self.action == "clear":
|
||||||
|
ok = mode == "matter"
|
||||||
|
return self._finish("Wi-Fi removed; the box uses Matter again (pair it in the Matter app if needed).") \
|
||||||
|
if ok else self._fail(f"The box restarted in {mode} mode instead of Matter.")
|
||||||
|
if mode != "wifi":
|
||||||
|
return self._fail(f"The box restarted in {mode} mode instead of local Wi-Fi.")
|
||||||
|
self.step = Step.CONNECT
|
||||||
|
self._deadline = self.now() + CONNECT_TIMEOUT_S
|
||||||
|
self._next_poll = self.now() + HEALTH_POLL_S
|
||||||
|
self._emit(Step.CONNECT.value + f" '{self.ssid}'...")
|
||||||
|
|
||||||
|
def _on_health(self, f: dict[str, str]) -> None:
|
||||||
|
if f.get("wifi") != "connected":
|
||||||
|
return
|
||||||
|
rssi = f.get("rssi", "?")
|
||||||
|
note = " - weak signal, consider moving the box or the router" if rssi.lstrip("-").isdigit() \
|
||||||
|
and int(rssi) < -75 else ""
|
||||||
|
self._finish(f"Connected to '{self.ssid}' (signal {rssi} dBm{note}). Data upload starts within a minute.")
|
||||||
|
|
||||||
|
def _go(self, step: Step, command: str, timeout: float) -> None:
|
||||||
|
self.step, self._deadline = step, self.now() + timeout
|
||||||
|
self._emit(step.value + "...")
|
||||||
|
if not self.send(command):
|
||||||
|
self._fail("The box is not connected. Connect it first.")
|
||||||
|
|
||||||
|
def _emit(self, text: str, ok: bool | None = None) -> None:
|
||||||
|
ev = FlowEvent(self.step, text, ok)
|
||||||
|
self._events.append(ev)
|
||||||
|
self.on_event(ev)
|
||||||
|
|
||||||
|
def _finish(self, text: str) -> None:
|
||||||
|
self.step = Step.DONE
|
||||||
|
self._emit(text, True)
|
||||||
|
|
||||||
|
def _fail(self, text: str) -> None:
|
||||||
|
self.step = Step.FAILED
|
||||||
|
self._emit(text, False)
|
||||||
@@ -54,7 +54,8 @@ HINTS = [
|
|||||||
|
|
||||||
STEPS = [
|
STEPS = [
|
||||||
"Switch the sensorbox <b>power switch ON</b>.",
|
"Switch the sensorbox <b>power switch ON</b>.",
|
||||||
"Connect the laptop to the box's <b>native USB</b> port with a data-capable cable.",
|
"Connect the box so that a <b>USB 2.0 type-A plug</b> is on the way to the laptop (into the laptop or a "
|
||||||
|
"hub; USB-C only often fails). The cable must carry data.",
|
||||||
"Open the <b>Serial monitor</b> tab, choose the sensorbox port, press "
|
"Open the <b>Serial monitor</b> tab, choose the sensorbox port, press "
|
||||||
"<b>Connect</b>.",
|
"<b>Connect</b>.",
|
||||||
"Press <b>Reset & capture</b> to record a full boot log from the first line.",
|
"Press <b>Reset & capture</b> to record a full boot log from the first line.",
|
||||||
|
|||||||
@@ -36,7 +36,7 @@ BACKUP_DIR = SESSIONS_DIR.parent / "backups"
|
|||||||
VERIFY_TIMEOUT_MS = 45_000
|
VERIFY_TIMEOUT_MS = 45_000
|
||||||
|
|
||||||
HELP = (
|
HELP = (
|
||||||
"<b>If flashing cannot connect:</b> use a data-capable USB cable directly on the laptop, close "
|
"<b>If flashing cannot connect:</b> use a data-capable cable with a USB 2.0 type-A plug on the way, close "
|
||||||
"other programs using the port, then retry. Last resort (case must be opened): hold <b>BOOT</b>, "
|
"other programs using the port, then retry. Last resort (case must be opened): hold <b>BOOT</b>, "
|
||||||
"press and release <b>RESET</b>, release <b>BOOT</b>, and press Start again."
|
"press and release <b>RESET</b>, release <b>BOOT</b>, and press Start again."
|
||||||
)
|
)
|
||||||
|
|||||||
@@ -28,6 +28,7 @@ from ..core.logline import LineKind, LogLine, host_event
|
|||||||
from ..core.session import SessionLog
|
from ..core.session import SessionLog
|
||||||
from ..diag.engine import DiagnosticsEngine
|
from ..diag.engine import DiagnosticsEngine
|
||||||
from ..diag.guides import GuideRunner
|
from ..diag.guides import GuideRunner
|
||||||
|
from ..serialio.commands import loggable
|
||||||
from ..serialio.manager import SerialManager, State
|
from ..serialio.manager import SerialManager, State
|
||||||
from ..serialio.ports import PortInfo, list_serial_ports
|
from ..serialio.ports import PortInfo, list_serial_ports
|
||||||
from ..matter.payload import SetupPayload, payload_from_log
|
from ..matter.payload import SetupPayload, payload_from_log
|
||||||
@@ -38,6 +39,7 @@ from .flash_tab import FlashTab
|
|||||||
from .matter_qr import MatterQrDialog
|
from .matter_qr import MatterQrDialog
|
||||||
from .guide_panel import GuidePanel
|
from .guide_panel import GuidePanel
|
||||||
from .sd_tab import SdTab
|
from .sd_tab import SdTab
|
||||||
|
from .wifi_tab import WifiTab
|
||||||
|
|
||||||
MAX_LINES = 20000
|
MAX_LINES = 20000
|
||||||
# "KOTA" = the firmware's structured diagnostic lines (1.0.16+) plus errors.
|
# "KOTA" = the firmware's structured diagnostic lines (1.0.16+) plus errors.
|
||||||
@@ -76,6 +78,7 @@ class SerialTab(QWidget):
|
|||||||
self._engine = DiagnosticsEngine()
|
self._engine = DiagnosticsEngine()
|
||||||
self._diag_dirty = True
|
self._diag_dirty = True
|
||||||
self._runner = GuideRunner(self._engine, on_action=self._guide_action, on_log=self._guide_log)
|
self._runner = GuideRunner(self._engine, on_action=self._guide_action, on_log=self._guide_log)
|
||||||
|
self._line_listeners: list = [] # other tabs following the live log (Wi-Fi over USB)
|
||||||
|
|
||||||
# --- controls
|
# --- controls
|
||||||
self.port_combo = QComboBox(minimumWidth=320)
|
self.port_combo = QComboBox(minimumWidth=320)
|
||||||
@@ -237,6 +240,39 @@ class SerialTab(QWidget):
|
|||||||
def engine(self) -> DiagnosticsEngine:
|
def engine(self) -> DiagnosticsEngine:
|
||||||
return self._engine
|
return self._engine
|
||||||
|
|
||||||
|
# ---- commands to the box (firmware usb_console) -----------------------
|
||||||
|
@property
|
||||||
|
def is_connected(self) -> bool:
|
||||||
|
return self._manager.state == State.CONNECTED
|
||||||
|
|
||||||
|
@property
|
||||||
|
def active_port(self) -> PortInfo | None:
|
||||||
|
return self._active_port if self._manager.is_running else None
|
||||||
|
|
||||||
|
def add_line_listener(self, callback) -> None:
|
||||||
|
self._line_listeners.append(callback)
|
||||||
|
|
||||||
|
def send_command(self, command: str) -> bool:
|
||||||
|
"""Write one "kota ..." line to the box; False when not connected.
|
||||||
|
The session log gets the command without the Wi-Fi password."""
|
||||||
|
if not self.is_connected:
|
||||||
|
return False
|
||||||
|
self._manager.write((command + "\n").encode("ascii"))
|
||||||
|
if not command.startswith(("kota health", "kota ping")): # polled; would flood the log
|
||||||
|
self._guide_log(f"sent to the box: {loggable(command)}")
|
||||||
|
return True
|
||||||
|
|
||||||
|
def connect_first_box(self) -> bool:
|
||||||
|
"""Connect to the first sensorbox port found (for tabs that need the box)."""
|
||||||
|
if self._manager.is_running:
|
||||||
|
return True
|
||||||
|
self.refresh_ports()
|
||||||
|
port = next((p for p in self._ports if p.is_sensorbox), None)
|
||||||
|
if port is None:
|
||||||
|
return False
|
||||||
|
self.connect_port(port, capture=False)
|
||||||
|
return True
|
||||||
|
|
||||||
def release_port(self) -> None:
|
def release_port(self) -> None:
|
||||||
"""Stop monitoring so esptool can open the port exclusively."""
|
"""Stop monitoring so esptool can open the port exclusively."""
|
||||||
if self._manager.is_running:
|
if self._manager.is_running:
|
||||||
@@ -293,6 +329,8 @@ class SerialTab(QWidget):
|
|||||||
self._session.write(line)
|
self._session.write(line)
|
||||||
self._engine.feed(line)
|
self._engine.feed(line)
|
||||||
self._runner.feed(line)
|
self._runner.feed(line)
|
||||||
|
for listener in self._line_listeners:
|
||||||
|
listener(line)
|
||||||
self._diag_dirty = True
|
self._diag_dirty = True
|
||||||
if line.kind == LineKind.BOOT:
|
if line.kind == LineKind.BOOT:
|
||||||
self._counts["boots"] += 1
|
self._counts["boots"] += 1
|
||||||
@@ -402,6 +440,8 @@ class MainWindow(QMainWindow):
|
|||||||
tabs.addTab(guide, "Quick start")
|
tabs.addTab(guide, "Quick start")
|
||||||
tabs.addTab(self.serial_tab, "Serial monitor")
|
tabs.addTab(self.serial_tab, "Serial monitor")
|
||||||
tabs.addTab(self.flash_tab, "Flash firmware")
|
tabs.addTab(self.flash_tab, "Flash firmware")
|
||||||
|
self.wifi_tab = WifiTab(self.serial_tab)
|
||||||
|
tabs.addTab(self.wifi_tab, "Wi-Fi (USB)")
|
||||||
self.sd_tab = SdTab(self.serial_tab)
|
self.sd_tab = SdTab(self.serial_tab)
|
||||||
tabs.addTab(self.sd_tab, "SD card")
|
tabs.addTab(self.sd_tab, "SD card")
|
||||||
self.setCentralWidget(tabs)
|
self.setCentralWidget(tabs)
|
||||||
|
|||||||
@@ -0,0 +1,207 @@
|
|||||||
|
"""Wi-Fi over USB: read / write / remove the box's Wi-Fi without opening the case.
|
||||||
|
|
||||||
|
Needs firmware with the USB console (usb_console, api=1). The job itself is
|
||||||
|
serialio.commands.WifiFlow; this tab only collects the input and shows the
|
||||||
|
steps. Lines arrive from the Serial monitor's connection (one port owner).
|
||||||
|
"""
|
||||||
|
|
||||||
|
from __future__ import annotations
|
||||||
|
|
||||||
|
from PySide6.QtCore import Qt, QTimer
|
||||||
|
from PySide6.QtWidgets import (
|
||||||
|
QCheckBox,
|
||||||
|
QFormLayout,
|
||||||
|
QGroupBox,
|
||||||
|
QHBoxLayout,
|
||||||
|
QLabel,
|
||||||
|
QLineEdit,
|
||||||
|
QListWidget,
|
||||||
|
QListWidgetItem,
|
||||||
|
QMessageBox,
|
||||||
|
QPushButton,
|
||||||
|
QVBoxLayout,
|
||||||
|
QWidget,
|
||||||
|
)
|
||||||
|
from PySide6.QtGui import QBrush, QColor
|
||||||
|
|
||||||
|
from ..core.logline import LogLine
|
||||||
|
from ..serialio.commands import FlowEvent, WifiFlow, validate_wifi
|
||||||
|
|
||||||
|
INTRO = (
|
||||||
|
"Stores the Wi-Fi name and password on the box's SD card over the USB cable - <b>no need to open the "
|
||||||
|
"case</b>. The box then restarts and uses this network instead of Matter. Needs firmware with USB commands "
|
||||||
|
"(<i>Flash firmware</i> tab, newest file). Only 2.4 GHz networks with a password (8-63 characters)."
|
||||||
|
)
|
||||||
|
MARK = {True: ("✔", "#1b7a33"), False: ("✖", "#b03a2e"), None: ("…", "#2e6da4")}
|
||||||
|
|
||||||
|
|
||||||
|
class WifiTab(QWidget):
|
||||||
|
def __init__(self, serial_tab, parent: QWidget | None = None):
|
||||||
|
super().__init__(parent)
|
||||||
|
self.serial_tab = serial_tab
|
||||||
|
self._flow: WifiFlow | None = None
|
||||||
|
|
||||||
|
intro = QLabel(INTRO, wordWrap=True)
|
||||||
|
|
||||||
|
# 1. box
|
||||||
|
box = QGroupBox("1. Sensorbox")
|
||||||
|
self.box_state = QLabel(wordWrap=True)
|
||||||
|
self.connect_btn = QPushButton("Connect to the box")
|
||||||
|
self.connect_btn.clicked.connect(self._connect)
|
||||||
|
self.read_btn = QPushButton("Read current Wi-Fi settings")
|
||||||
|
self.read_btn.clicked.connect(lambda: self._run("read"))
|
||||||
|
bl = QVBoxLayout(box)
|
||||||
|
bl.addWidget(self.box_state)
|
||||||
|
brow = QHBoxLayout()
|
||||||
|
brow.addWidget(self.connect_btn)
|
||||||
|
brow.addWidget(self.read_btn)
|
||||||
|
brow.addStretch(1)
|
||||||
|
bl.addLayout(brow)
|
||||||
|
|
||||||
|
# 2. network
|
||||||
|
net = QGroupBox("2. Wi-Fi network for this box")
|
||||||
|
self.ssid = QLineEdit(placeholderText="network name (SSID), exactly as on the router")
|
||||||
|
self.password = QLineEdit(placeholderText="8-63 characters")
|
||||||
|
self.password.setEchoMode(QLineEdit.EchoMode.Password)
|
||||||
|
show = QCheckBox("Show password")
|
||||||
|
show.toggled.connect(lambda on: self.password.setEchoMode(
|
||||||
|
QLineEdit.EchoMode.Normal if on else QLineEdit.EchoMode.Password))
|
||||||
|
form = QFormLayout()
|
||||||
|
form.addRow("Network (SSID)", self.ssid)
|
||||||
|
prow = QHBoxLayout()
|
||||||
|
prow.addWidget(self.password, 1)
|
||||||
|
prow.addWidget(show)
|
||||||
|
form.addRow("Password", prow)
|
||||||
|
self.input_problem = QLabel(wordWrap=True)
|
||||||
|
self.input_problem.setStyleSheet("color:#b03a2e")
|
||||||
|
self.write_btn = QPushButton("Write to the box and connect")
|
||||||
|
self.write_btn.setMinimumHeight(34)
|
||||||
|
self.write_btn.clicked.connect(lambda: self._run("set"))
|
||||||
|
self.clear_btn = QPushButton("Remove Wi-Fi (back to Matter)")
|
||||||
|
self.clear_btn.clicked.connect(self._clear)
|
||||||
|
nl = QVBoxLayout(net)
|
||||||
|
nl.addLayout(form)
|
||||||
|
nl.addWidget(self.input_problem)
|
||||||
|
arow = QHBoxLayout()
|
||||||
|
arow.addWidget(self.write_btn)
|
||||||
|
arow.addWidget(self.clear_btn)
|
||||||
|
arow.addStretch(1)
|
||||||
|
nl.addLayout(arow)
|
||||||
|
|
||||||
|
# 3. progress
|
||||||
|
prog = QGroupBox("3. Progress")
|
||||||
|
self.steps = QListWidget()
|
||||||
|
self.steps.setSelectionMode(QListWidget.SelectionMode.NoSelection)
|
||||||
|
self.result = QLabel(wordWrap=True)
|
||||||
|
self.result.setMargin(8)
|
||||||
|
self.result.setVisible(False)
|
||||||
|
self.cancel_btn = QPushButton("Cancel")
|
||||||
|
self.cancel_btn.clicked.connect(self._cancel)
|
||||||
|
pl = QVBoxLayout(prog)
|
||||||
|
pl.addWidget(self.steps)
|
||||||
|
pl.addWidget(self.result)
|
||||||
|
pl.addWidget(self.cancel_btn, 0, Qt.AlignmentFlag.AlignLeft)
|
||||||
|
|
||||||
|
lay = QVBoxLayout(self)
|
||||||
|
lay.addWidget(intro)
|
||||||
|
lay.addWidget(box)
|
||||||
|
lay.addWidget(net)
|
||||||
|
lay.addWidget(prog, 1)
|
||||||
|
|
||||||
|
serial_tab.add_line_listener(self._on_line)
|
||||||
|
for w in (self.ssid, self.password):
|
||||||
|
w.textChanged.connect(self._update)
|
||||||
|
self._timer = QTimer(self, interval=500)
|
||||||
|
self._timer.timeout.connect(self._tick)
|
||||||
|
self._timer.start()
|
||||||
|
self._update()
|
||||||
|
|
||||||
|
# ------------------------------------------------------------ state
|
||||||
|
def showEvent(self, event): # noqa: N802 - refresh when the tab is opened
|
||||||
|
self._update()
|
||||||
|
super().showEvent(event)
|
||||||
|
|
||||||
|
def _update(self) -> None:
|
||||||
|
connected = self.serial_tab.is_connected
|
||||||
|
busy = self._flow is not None and not self._flow.finished
|
||||||
|
port = self.serial_tab.active_port
|
||||||
|
eng = self.serial_tab.engine
|
||||||
|
if connected and port:
|
||||||
|
fw = eng.firmware.describe() if eng.firmware.elf_sha else "firmware not identified yet"
|
||||||
|
api = {None: "", 1: " - USB commands supported"}.get(eng.console_api, f" - USB commands api {eng.console_api}")
|
||||||
|
self.box_state.setText(f"Connected: <b>{port.label}</b><br><small>{fw}{api}</small>")
|
||||||
|
elif self.serial_tab.active_port:
|
||||||
|
self.box_state.setText("Waiting for the box... (it may be restarting)")
|
||||||
|
else:
|
||||||
|
self.box_state.setText("Not connected. Plug in the sensorbox (native USB) and press "
|
||||||
|
"<b>Connect to the box</b>.")
|
||||||
|
problems = validate_wifi(self.ssid.text(), self.password.text())
|
||||||
|
typed = bool(self.ssid.text() or self.password.text())
|
||||||
|
self.input_problem.setText(" ".join(problems) if typed else "")
|
||||||
|
self.connect_btn.setVisible(not self.serial_tab.active_port)
|
||||||
|
for w in (self.read_btn, self.clear_btn):
|
||||||
|
w.setEnabled(connected and not busy)
|
||||||
|
self.write_btn.setEnabled(connected and not busy and not problems)
|
||||||
|
self.ssid.setEnabled(not busy)
|
||||||
|
self.password.setEnabled(not busy)
|
||||||
|
self.cancel_btn.setVisible(busy)
|
||||||
|
|
||||||
|
def _tick(self) -> None:
|
||||||
|
if self._flow is not None:
|
||||||
|
self._flow.tick()
|
||||||
|
self._update()
|
||||||
|
|
||||||
|
# ------------------------------------------------------------ actions
|
||||||
|
def _connect(self) -> None:
|
||||||
|
if not self.serial_tab.connect_first_box():
|
||||||
|
QMessageBox.information(self, "Wi-Fi over USB", "No sensorbox found. Check the USB cable (data-capable) "
|
||||||
|
"and that the box is powered, then try again.")
|
||||||
|
self._update()
|
||||||
|
|
||||||
|
def _clear(self) -> None:
|
||||||
|
if QMessageBox.question(
|
||||||
|
self, "Remove Wi-Fi",
|
||||||
|
"Remove the Wi-Fi network from the box?\n\nThe box restarts and uses Matter again. If it was never "
|
||||||
|
"paired in Matter, it has no network until you pair it in the Matter app.",
|
||||||
|
QMessageBox.StandardButton.Yes | QMessageBox.StandardButton.No) == QMessageBox.StandardButton.Yes:
|
||||||
|
self._run("clear")
|
||||||
|
|
||||||
|
def _run(self, action: str) -> None:
|
||||||
|
if action == "set" and QMessageBox.question(
|
||||||
|
self, "Write Wi-Fi",
|
||||||
|
f"Store network '{self.ssid.text()}' on the box?\n\nThe box restarts and connects to this Wi-Fi "
|
||||||
|
"instead of Matter (about 30 s).",
|
||||||
|
QMessageBox.StandardButton.Yes | QMessageBox.StandardButton.No) != QMessageBox.StandardButton.Yes:
|
||||||
|
return
|
||||||
|
self.steps.clear()
|
||||||
|
self.result.setVisible(False)
|
||||||
|
self._flow = WifiFlow(action, self.serial_tab.send_command, self._on_event,
|
||||||
|
ssid=self.ssid.text(), password=self.password.text())
|
||||||
|
self._flow.start()
|
||||||
|
self._update()
|
||||||
|
|
||||||
|
def _cancel(self) -> None:
|
||||||
|
if self._flow is not None:
|
||||||
|
self._flow.cancel()
|
||||||
|
self._update()
|
||||||
|
|
||||||
|
# ------------------------------------------------------------ events
|
||||||
|
def _on_line(self, line: LogLine) -> None:
|
||||||
|
if self._flow is not None:
|
||||||
|
self._flow.feed(line)
|
||||||
|
|
||||||
|
def _on_event(self, ev: FlowEvent) -> None:
|
||||||
|
mark, colour = MARK[ev.ok]
|
||||||
|
item = QListWidgetItem(f"{mark} {ev.text}")
|
||||||
|
item.setForeground(QBrush(QColor(colour)))
|
||||||
|
self.steps.addItem(item)
|
||||||
|
self.steps.scrollToBottom()
|
||||||
|
if self._flow is not None and self._flow.finished or ev.ok is False:
|
||||||
|
ok = ev.ok is True
|
||||||
|
border, bg = ("#2e9e44", "#e3f4e7") if ok else ("#d9534f", "#f9e0df")
|
||||||
|
self.result.setStyleSheet(f"QLabel {{ border:2px solid {border}; background:{bg}; border-radius:6px; }}")
|
||||||
|
self.result.setText(("<b>Done.</b> " if ok else "<b>Not done.</b> ") + ev.text)
|
||||||
|
self.result.setVisible(True)
|
||||||
|
if ok and self._flow and self._flow.info and self._flow.info.ssid and not self.ssid.text():
|
||||||
|
self.ssid.setText(self._flow.info.ssid) # read: prefill the stored network name
|
||||||
|
self._update()
|
||||||
+1
-1
@@ -1,6 +1,6 @@
|
|||||||
[project]
|
[project]
|
||||||
name = "kota-technician-tool"
|
name = "kota-technician-tool"
|
||||||
version = "0.8.0"
|
version = "0.9.0"
|
||||||
description = "KOTA sensorbox technician diagnostic tool (demo)"
|
description = "KOTA sensorbox technician diagnostic tool (demo)"
|
||||||
requires-python = ">=3.11,<3.14"
|
requires-python = ">=3.11,<3.14"
|
||||||
dependencies = [
|
dependencies = [
|
||||||
|
|||||||
+2
-2
@@ -4,8 +4,8 @@ cd "$(dirname "$0")" || exit 1
|
|||||||
|
|
||||||
# If Finder refuses to open this file (Google Drive drops the executable bit), run it once as:
|
# If Finder refuses to open this file (Google Drive drops the executable bit), run it once as:
|
||||||
# bash run_macos.command (or: chmod +x run_macos.command)
|
# bash run_macos.command (or: chmod +x run_macos.command)
|
||||||
# Keep the virtual environment out of the (Google Drive) tool folder.
|
# One shared Python environment for every version (update_macos.command keeps it current).
|
||||||
export UV_PROJECT_ENVIRONMENT="$HOME/Library/Caches/KotaTechnicianTool/venv-0.8"
|
export UV_PROJECT_ENVIRONMENT="$HOME/Library/Caches/KotaTechnicianTool/venv"
|
||||||
export PATH="$HOME/.local/bin:$PATH"
|
export PATH="$HOME/.local/bin:$PATH"
|
||||||
|
|
||||||
if ! command -v uv >/dev/null 2>&1; then
|
if ! command -v uv >/dev/null 2>&1; then
|
||||||
|
|||||||
+2
-2
@@ -2,8 +2,8 @@
|
|||||||
setlocal
|
setlocal
|
||||||
cd /d "%~dp0"
|
cd /d "%~dp0"
|
||||||
|
|
||||||
rem Keep the virtual environment out of the (Google Drive) tool folder.
|
rem One shared Python environment for every version (update_windows.bat keeps it current).
|
||||||
set "UV_PROJECT_ENVIRONMENT=%LOCALAPPDATA%\KotaTechnicianTool\venv-0.8"
|
set "UV_PROJECT_ENVIRONMENT=%LOCALAPPDATA%\KotaTechnicianTool\venv"
|
||||||
set "PATH=%USERPROFILE%\.local\bin;%PATH%"
|
set "PATH=%USERPROFILE%\.local\bin;%PATH%"
|
||||||
|
|
||||||
where uv >nul 2>nul
|
where uv >nul 2>nul
|
||||||
|
|||||||
@@ -0,0 +1,973 @@
|
|||||||
|
--- connected to COM14 ---
|
||||||
|
W (9426) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
--- reset issued by tool ---
|
||||||
|
ESP-ROM:esp32s3-20210327
|
||||||
|
Build:Mar 27 2021
|
||||||
|
rst:0x15 (USB_UART_CHIP_RESET),boot:0xb (SPI_FAST_FLASH_BOOT)
|
||||||
|
Saved PC:0x4037f366
|
||||||
|
SPIWP:0xee
|
||||||
|
mode:DIO, clock div:1
|
||||||
|
load:0x3fce2820,len:0x14f0
|
||||||
|
load:0x403c8700,len:0xd24
|
||||||
|
load:0x403cb700,len:0x2f48
|
||||||
|
entry 0x403c8924
|
||||||
|
I (24) boot: ESP-IDF v5.5.3-dirty 2nd stage bootloader
|
||||||
|
I (24) boot: compile time Sep 10 2026 13:24:39
|
||||||
|
I (25) boot: Multicore bootloader
|
||||||
|
I (25) boot: chip revision: v0.2
|
||||||
|
I (28) boot: efuse block revision: v1.4
|
||||||
|
I (32) boot.esp32s3: Boot SPI Speed : 80MHz
|
||||||
|
I (35) boot.esp32s3: SPI Mode : DIO
|
||||||
|
I (39) boot.esp32s3: SPI Flash Size : 8MB
|
||||||
|
I (43) boot: Enabling RNG early entropy source...
|
||||||
|
I (48) boot: Partition Table:
|
||||||
|
I (50) boot: ## Label Usage Type ST Offset Length
|
||||||
|
I (56) boot: 0 esp_secure_cert unknown 3f 06 0000d000 00002000
|
||||||
|
I (63) boot: 1 nvs WiFi data 01 02 00010000 00020000
|
||||||
|
I (69) boot: 2 nvs_keys NVS keys 01 04 00030000 00001000
|
||||||
|
I (76) boot: 3 otadata OTA data 01 00 00031000 00002000
|
||||||
|
I (82) boot: 4 phy_init RF data 01 01 00033000 00001000
|
||||||
|
I (89) boot: 5 ota_0 OTA app 00 10 00040000 00300000
|
||||||
|
I (95) boot: 6 ota_1 OTA app 00 11 00340000 00300000
|
||||||
|
I (102) boot: 7 fctry WiFi data 01 02 00640000 00006000
|
||||||
|
I (109) boot: End of partition table
|
||||||
|
I (112) esp_image: segment 0: paddr=00040020 vaddr=3c190020 size=67420h (422944) map
|
||||||
|
I (194) esp_image: segment 1: paddr=000a7448 vaddr=3fc9c700 size=05d00h ( 23808) load
|
||||||
|
I (200) esp_image: segment 2: paddr=000ad150 vaddr=40374000 size=02ec8h ( 11976) load
|
||||||
|
I (203) esp_image: segment 3: paddr=000b0020 vaddr=42000020 size=187370h (1602416) map
|
||||||
|
I (488) esp_image: segment 4: paddr=00237398 vaddr=40376ec8 size=1580ch ( 88076) load
|
||||||
|
I (507) esp_image: segment 5: paddr=0024cbac vaddr=5000002c size=00020h ( 32) load
|
||||||
|
I (517) boot: Loaded app from partition at offset 0x40000
|
||||||
|
I (518) boot: Disabling RNG early entropy source...
|
||||||
|
I (528) octal_psram: vendor id : 0x0d (AP)
|
||||||
|
I (528) octal_psram: dev id : 0x02 (generation 3)
|
||||||
|
I (529) octal_psram: density : 0x03 (64 Mbit)
|
||||||
|
I (530) octal_psram: good-die : 0x01 (Pass)
|
||||||
|
I (535) octal_psram: Latency : 0x01 (Fixed)
|
||||||
|
I (539) octal_psram: VCC : 0x01 (3V)
|
||||||
|
I (543) octal_psram: SRF : 0x01 (Fast Refresh)
|
||||||
|
I (548) octal_psram: BurstType : 0x01 (Hybrid Wrap)
|
||||||
|
I (553) octal_psram: BurstLen : 0x01 (32 Byte)
|
||||||
|
I (557) octal_psram: Readlatency : 0x02 (10 cycles@Fixed)
|
||||||
|
I (562) octal_psram: DriveStrength: 0x00 (1/1)
|
||||||
|
I (567) esp_psram: Found 8MB PSRAM device
|
||||||
|
I (570) esp_psram: Speed: 40MHz
|
||||||
|
I (573) cpu_start: Multicore app
|
||||||
|
I (1307) esp_psram: SPI SRAM memory test OK
|
||||||
|
I (1315) cpu_start: GPIO 44 and 43 are used as console UART I/O pins
|
||||||
|
I (1316) cpu_start: Pro cpu start user code
|
||||||
|
I (1316) cpu_start: cpu freq: 160000000 Hz
|
||||||
|
I (1318) app_init: Application information:
|
||||||
|
I (1322) app_init: Project name: kota-sensorboard
|
||||||
|
I (1327) app_init: App version: 1.0.16
|
||||||
|
I (1331) app_init: Compile time: Sep 28 2026 15:07:57
|
||||||
|
I (1336) app_init: ELF file SHA256: 3ae273ec1...
|
||||||
|
I (1340) app_init: ESP-IDF: v5.5.3-dirty
|
||||||
|
I (1345) efuse_init: Min chip rev: v0.0
|
||||||
|
I (1348) efuse_init: Max chip rev: v0.99
|
||||||
|
I (1353) efuse_init: Chip rev: v0.2
|
||||||
|
I (1357) heap_init: Initializing. RAM available for dynamic allocation:
|
||||||
|
I (1363) heap_init: At 3FCB4AD0 len 00034C40 (211 KiB): RAM
|
||||||
|
I (1368) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
|
||||||
|
I (1373) heap_init: At 3FCF0000 len 00008000 (32 KiB): DRAM
|
||||||
|
I (1379) heap_init: At 600FE000 len 00001FE8 (7 KiB): RTCRAM
|
||||||
|
I (1384) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
|
||||||
|
I (1392) spi_flash: detected chip: generic
|
||||||
|
I (1394) spi_flash: flash io: dio
|
||||||
|
I (1400) sleep_gpio: Configure to isolate all GPIO pins in sleep state
|
||||||
|
I (1404) sleep_gpio: Enable automatic switching of GPIO sleep configuration
|
||||||
|
I (1419) main_task: Started on CPU0
|
||||||
|
I (1422) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
|
||||||
|
I (1430) main_task: Calling app_main()
|
||||||
|
E (1433) ID: [E-MAIN-04] Device MAC address: 14:C1:9F:57:72:48
|
||||||
|
I (1475) KOTA: led color=green pattern=solid
|
||||||
|
I (1676) I2C: Creating I2C mutex
|
||||||
|
I (1694) KOTA: i2c SDA=1 SCL=1 0x39=AS7341 0x68=DS1307 0x6B=SEN66 0x76=BME688
|
||||||
|
I (1696) OTA_CLIENT: OTA token loaded from NVS: <REDACTED>
|
||||||
|
I (1698) OTA_CLIENT: Device is not in selfcheck mode
|
||||||
|
I (1702) OTA_CLIENT: Update metadata loaded from NVS: version=15, status=2
|
||||||
|
I (1707) OTA_CLIENT: Device is in factory state
|
||||||
|
I (1711) SPI: Creating SPI mutex
|
||||||
|
I (1755) SD_CARD: SD card mounted successfully
|
||||||
|
I (1756) SD_CARD: /sdcard exists, SD card initialized successfully
|
||||||
|
I (1758) INFLUX_BUFFER: Buffer file does not exist, returning count of 0
|
||||||
|
I (1763) KOTA: sd type=SDHC size=29.2GB fs=FAT32 free=29.1GB env_keys=INFLUX_TOKEN,INFLUX_URL buffer_lines=0
|
||||||
|
I (1774) WIFI_CREDENTIALS: SSID/PASSWORD not set in .env; Matter will be used for WiFi provisioning
|
||||||
|
I (1785) MAIN: Matter node created successfully
|
||||||
|
W (1787) data_model: Server Cluster 0x00000003 on endpoint 0x0001 already exists. Not creating again.
|
||||||
|
W (1793) data_model: Attribute 0x0000FFFC on cluster 0x00000003 already exists. Not creating again.
|
||||||
|
W (1802) data_model: Attribute 0x0000FFFD on cluster 0x00000003 already exists. Not creating again.
|
||||||
|
W (1811) data_model: Attribute 0x00000000 on cluster 0x00000003 already exists. Not creating again.
|
||||||
|
W (1819) data_model: Attribute 0x00000001 on cluster 0x00000003 already exists. Not creating again.
|
||||||
|
W (1828) data_model: Command 0x00000000 on cluster 0x00000003 already exists. Not creating again.
|
||||||
|
W (1837) data_model: Server Cluster 0x00000003 on endpoint 0x0001 already exists. Not creating again.
|
||||||
|
W (1846) data_model: Attribute 0x0000FFFC on cluster 0x00000003 already exists. Not creating again.
|
||||||
|
W (1854) data_model: Attribute 0x0000FFFD on cluster 0x00000003 already exists. Not creating again.
|
||||||
|
W (1863) data_model: Attribute 0x00000000 on cluster 0x00000003 already exists. Not creating again.
|
||||||
|
W (1872) data_model: Attribute 0x00000001 on cluster 0x00000003 already exists. Not creating again.
|
||||||
|
W (1881) data_model: Command 0x00000000 on cluster 0x00000003 already exists. Not creating again.
|
||||||
|
W (1890) data_model: Server Cluster 0x00000003 on endpoint 0x0001 already exists. Not creating again.
|
||||||
|
W (1898) data_model: Attribute 0x0000FFFC on cluster 0x00000003 already exists. Not creating again.
|
||||||
|
W (1907) data_model: Attribute 0x0000FFFD on cluster 0x00000003 already exists. Not creating again.
|
||||||
|
W (1916) data_model: Attribute 0x00000000 on cluster 0x00000003 already exists. Not creating again.
|
||||||
|
W (1925) data_model: Attribute 0x00000001 on cluster 0x00000003 already exists. Not creating again.
|
||||||
|
W (1933) data_model: Command 0x00000000 on cluster 0x00000003 already exists. Not creating again.
|
||||||
|
I (1944) pp: pp rom version: e7ae62f
|
||||||
|
I (1945) net80211: net80211 rom version: e7ae62f
|
||||||
|
I (1951) wifi:wifi driver task: 3fcc9610, prio:23, stack:6656, core=0
|
||||||
|
I (1969) wifi:wifi firmware version: 4df78f2
|
||||||
|
I (1970) wifi:wifi certification version: v7.0
|
||||||
|
I (1971) wifi:config NVS flash: enabled
|
||||||
|
I (1971) wifi:config nano formatting: disabled
|
||||||
|
I (1975) wifi:Init data frame dynamic rx buffer num: 32
|
||||||
|
I (1980) wifi:Init static rx mgmt buffer num: 5
|
||||||
|
I (1984) wifi:Init management short buffer num: 32
|
||||||
|
I (1988) wifi:Init dynamic tx buffer num: 32
|
||||||
|
I (1992) wifi:Init static tx FG buffer num: 2
|
||||||
|
I (1997) wifi:Init static rx buffer size: 1600
|
||||||
|
I (2001) wifi:Init static rx buffer num: 10
|
||||||
|
I (2004) wifi:Init dynamic rx buffer num: 32
|
||||||
|
I (2009) wifi_init: rx ba win: 6
|
||||||
|
I (2011) wifi_init: accept mbox: 6
|
||||||
|
I (2014) wifi_init: tcpip mbox: 32
|
||||||
|
I (2018) wifi_init: udp mbox: 6
|
||||||
|
I (2020) wifi_init: tcp mbox: 6
|
||||||
|
I (2023) wifi_init: tcp tx win: 5760
|
||||||
|
I (2027) wifi_init: tcp rx win: 5760
|
||||||
|
I (2030) wifi_init: tcp mss: 1440
|
||||||
|
I (2045) chip[DL]: NVS set: chip-counters/reboot-count = 13 (0xD)
|
||||||
|
I (2048) chip[DL]: Real time clock set to 946684800 (2000-01-01 00:00:00 UTC)
|
||||||
|
I (2050) BLE_INIT: BT controller compile version [1bb2f50]
|
||||||
|
I (2053) BLE_INIT: Using main XTAL as clock source
|
||||||
|
I (2058) BLE_INIT: Feature Config, ADV:1, BLE_50:1, DTM:1, SCAN:1, CCA:0, SMP:1, CONNECT:1
|
||||||
|
I (2067) BLE_INIT: Bluetooth MAC: 14:c1:9f:57:72:4a
|
||||||
|
I (2072) phy_init: phy_version 711,97bcf0a2,Aug 25 2025,19:04:10
|
||||||
|
I (2119) NimBLE: GAP procedure initiated: stop advertising.
|
||||||
|
|
||||||
|
I (2122) CHIP[DL]: BLE host-controller synced
|
||||||
|
I (2623) chip[DL]: Starting ESP WiFi layer
|
||||||
|
I (2626) wifi:mode : sta (14:c1:9f:57:72:48)
|
||||||
|
I (2627) wifi:enable tsf
|
||||||
|
W (2628) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (2629) chip[DL]:
|
||||||
|
I (2629) chip[DL]: Posting ESPSystemEvent: Wifi Event with eventId : 43Attempting to connect WiFi station interface
|
||||||
|
|
||||||
|
I (2641) chip[DL]: WiFi station state change: NotConnected -> Connecting
|
||||||
|
I (2642) chip[DL]: Posting ESPSystemEvent: Wifi Event with eventId : 2
|
||||||
|
I (2647) chip[DL]:
|
||||||
|
Done driving station state, nothing else to do...
|
||||||
|
I (2659) chip[SVR]: Initializing subscription resumption storage...
|
||||||
|
I (2666) chip[SVR]: Server initializing...
|
||||||
|
I (2669) chip[TS]: Last Known Good Time: 2026-09-29T14:59:23
|
||||||
|
I (2674) chip[DMG]: AccessControl: initializing
|
||||||
|
I (2678) chip[DMG]: Examples::AccessControlDelegate::Init
|
||||||
|
I (2683) chip[DMG]: AccessControl: setting
|
||||||
|
I (2687) chip[DMG]: DefaultAclStorage: initializing
|
||||||
|
I (2691) chip[DMG]: DefaultAclStorage: 0 entries loaded
|
||||||
|
I (2696) chip[SVR]: WARNING: mTestEventTriggerDelegate is null
|
||||||
|
I (2715) chip[ZCL]: Using ZAP configuration...
|
||||||
|
I (2716) esp_matter_cluster: Cluster plugin init common callback
|
||||||
|
I (2718) chip[DMG]: AccessControlCluster: initializing
|
||||||
|
I (2720) chip[ZCL]: WRITE ERR: ep 0 clus 0x0000_0030 attr 0x0000_0000 not supported
|
||||||
|
I (2730) chip[DIS]: Updating services using commissioning mode 1
|
||||||
|
I (2733) chip[DIS]: CHIP minimal mDNS started advertising.
|
||||||
|
I (2739) chip[DIS]: Advertise commission parameter vendorID=65521 productID=32768 discriminator=3840/15 cm=1 cp=0
|
||||||
|
I (2749) chip[DIS]: CHIP minimal mDNS configured as 'Commissionable node device'; instance name: 995B80B34BC8AAD9.
|
||||||
|
I (2758) chip[DIS]: mDNS service published: _matterc._udp
|
||||||
|
I (2763) chip[IN]: CASE Server enabling CASE session setups
|
||||||
|
I (2769) chip[SVR]: Joining Multicast groups
|
||||||
|
I (2772) chip[SVR]: Server Listening...
|
||||||
|
I (2778) esp_matter_attribute: ********** R : Endpoint 0x0000's Cluster 0x0000003C's Attribute 0x0000FFFC is 0 **********
|
||||||
|
I (2788) data_model: Dynamic endpoint 0 added
|
||||||
|
E (2790) data_model: Cluster cannot be NULL.
|
||||||
|
I (2795) esp_matter_attribute: ********** R : Endpoint 0x0001's Cluster 0x00000003's Attribute 0x00000001 is 2 **********
|
||||||
|
I (2806) data_model: Dynamic endpoint 1 added
|
||||||
|
E (2809) data_model: Cluster cannot be NULL.
|
||||||
|
I (2815) chip[DL]:
|
||||||
|
I (2815) MAIN: ESP-Matter started successfully
|
||||||
|
WIFI_EVENT_STA_START
|
||||||
|
W (2821) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (2826) chip[DL]: Attempting to connect WiFi station interface
|
||||||
|
E (2832) wifi:sta is connecting, return error
|
||||||
|
E (2836) chip[DL]: esp_wifi_connect() failed: ESP_ERR_WIFI_CONN
|
||||||
|
I (2842) KOTA: boot fw=1.0.16 build=3ae273ec hw=2 mac=14C19F577248 reset=USB_UART_CHIP_RESET mode=matter commissioned=0 last_restart=none
|
||||||
|
I (2843) chip[DL]: Configuring CHIPoBLE advertising (interval 25 ms, connectable)
|
||||||
|
I (2861) NimBLE: GAP procedure initiated: advertise;
|
||||||
|
I (2865) NimBLE: disc_mode=2
|
||||||
|
I (2867) NimBLE: adv_channel_map=0 own_addr_type=1 adv_filter_policy=0 adv_itvl_min=40 adv_itvl_max=40
|
||||||
|
I (2877) NimBLE:
|
||||||
|
|
||||||
|
I (2880) chip[DL]: CHIPoBLE advertising started
|
||||||
|
I (2883) MAIN: Commissioning window opened
|
||||||
|
I (2888) KOTA: matter fabrics=0 window=open qr=MT:Y.K9042C00KA0648G00 manual=34970112332
|
||||||
|
I (2896) KOTA: led color=cyan pattern=breathe period=3000ms
|
||||||
|
I (2901) KOTA: matter fabrics=0 window=open qr=MT:Y.K9042C00KA0648G00 manual=34970112332
|
||||||
|
W (2909) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (2908) KOTA: health up=1s status=OK wifi=disconnected rssi=0 time_valid=0 sd=ok buffer=0 heap=117491 psram=7.9M last_upload=never ota=registered
|
||||||
|
W (3401) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (3910) KOTA: rtc running=0 time=2000-01-01T00:00:00
|
||||||
|
W (4402) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
W (5403) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
W (6404) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (7219) wifi:Coexist: Wi-Fi connect fail, apply reconnect coex policy
|
||||||
|
|
||||||
|
I (7222) chip[DL]: Posting ESPSystemEvent: Wifi Event with eventId : 5
|
||||||
|
I (7223) chip[DL]: WIFI_EVENT_STA_DISCONNECTED
|
||||||
|
I (7226) chip[DL]: WiFi station state change: Connecting -> Connecting_Failed
|
||||||
|
W (7233) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
E (7238) chip[DL]: Failed to get configured network when updating network status: Error ESP32:0x0500300F
|
||||||
|
W (7248) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (7252) chip[DL]: WiFi station state change: Connecting_Failed -> NotConnected
|
||||||
|
W (7259) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
E (7264) chip[DL]: Failed to get configured network when updating network status: Error ESP32:0x0500300F
|
||||||
|
I (7273) chip[DL]: Next WiFi station reconnect in 100 ms
|
||||||
|
I (7278) chip[DL]: Done driving station state, nothing else to do...
|
||||||
|
W (7379) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (7380) chip[DL]: Attempting to connect WiFi station interface
|
||||||
|
I (7383) chip[DL]: WiFi station state change: NotConnected -> Connecting
|
||||||
|
W (7386) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
E (7391) chip[DL]: Failed to get configured network when updating network status: Error ESP32:0x0500300F
|
||||||
|
I (7400) chip[DL]: Done driving station state, nothing else to do...
|
||||||
|
W (7405) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
W (8411) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
W (9415) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
W (10417) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
W (11419) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (12201) wifi:Coexist: Wi-Fi connect fail, apply reconnect coex policy
|
||||||
|
|
||||||
|
I (12204) chip[DL]: Posting ESPSystemEvent: Wifi Event with eventId : 5
|
||||||
|
I (12205) chip[DL]: WIFI_EVENT_STA_DISCONNECTED
|
||||||
|
I (12208) chip[DL]: WiFi station state change: Connecting -> Connecting_Failed
|
||||||
|
W (12215) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
E (12220) chip[DL]: Failed to get configured network when updating network status: Error ESP32:0x0500300F
|
||||||
|
W (12230) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (12234) chip[DL]: WiFi station state change: Connecting_Failed -> NotConnected
|
||||||
|
W (12242) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
E (12247) chip[DL]: Failed to get configured network when updating network status: Error ESP32:0x0500300F
|
||||||
|
I (12256) chip[DL]: Next WiFi station reconnect in 100 ms
|
||||||
|
I (12261) chip[DL]: Done driving station state, nothing else to do...
|
||||||
|
W (12361) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (12362) chip[DL]: Attempting to connect WiFi station interface
|
||||||
|
I (12366) chip[DL]: WiFi station state change: NotConnected -> Connecting
|
||||||
|
W (12368) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
E (12373) chip[DL]: Failed to get configured network when updating network status: Error ESP32:0x0500300F
|
||||||
|
I (12383) chip[DL]: Done driving station state, nothing else to do...
|
||||||
|
W (12427) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
W (13428) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (13912) INFLUX_BUFFER: Read INFLUX_URL from .env file: https://influx.kota-app.com/api/v2/write?bucket=sensorbox&org=kota
|
||||||
|
I (13917) INFLUX_BUFFER: Buffer file does not exist, returning count of 0
|
||||||
|
W (13920) INFLUX: Initializing Influx client with URL: https://influx.kota-app.com/api/v2/write?bucket=sensorbox&org=kota
|
||||||
|
I (13943) BME688: Delaying for 10000 microseconds
|
||||||
|
W (14430) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (14563) KOTA: mic enabled=1 (GPIO3=0, expected 0)
|
||||||
|
I (14566) Flicker: Flicker sensor initialized on pin 14
|
||||||
|
I (14567) temperature_sensor: Range [20°C ~ 100°C], error < 2°C
|
||||||
|
I (14569) SENSOR_GATHERER: Resumed 2 tasks to gather sensor data
|
||||||
|
W (14573) wifi:
|
||||||
|
I (14569) SENSOR_GATHERER: Resumed 4 tasks to gather sensor data
|
||||||
|
Haven't to connect to a suitable AP now!
|
||||||
|
I (14570) SEN66: Creating sensor mutex
|
||||||
|
I (14572) Flicker: Collecting 1024 samples at 1000 Hz for dominant frequency analysis for total measurement window of 1000 ms
|
||||||
|
I (14600) Flicker: Starting to collect samples in gather task
|
||||||
|
I (14585) DeviceStatus: Active tasks: 27
|
||||||
|
I (14588) SEN66: Waking up sensor by setting power GPIO to enabled level...
|
||||||
|
I (14570) INFLUX_BUFFER: Buffer file does not exist, returning empty buffer
|
||||||
|
I (14622) INFLUX_BUFFER: Buffer is empty, nothing to flush
|
||||||
|
I (14613) DeviceStatus: Task list:
|
||||||
|
gather_sensor_t R 1 1920 25
|
||||||
|
gather_sensor_t X 1 1368 23
|
||||||
|
IDLE1 R 0 700 6
|
||||||
|
IDLE0 R 0 692 5
|
||||||
|
gather_sensor_t B 1 2556 22
|
||||||
|
reset_task B 0 3356 10
|
||||||
|
ds1307_update B 1 776 18
|
||||||
|
tiT B 18 2420 12
|
||||||
|
gather_task B 1 1916 20
|
||||||
|
gather_task B 1 14288 21
|
||||||
|
ota_task B 1 7516 19
|
||||||
|
CHIP B 1 3700 14
|
||||||
|
health B 1 728 17
|
||||||
|
Tmr Svc B 1 1364 7
|
||||||
|
led_task B 5 868 8
|
||||||
|
nimble_host B 21 1348 16
|
||||||
|
ipc0 S 24 372 1
|
||||||
|
ipc1 S 24 524 2
|
||||||
|
sys_evt B 20 2676 11
|
||||||
|
gather_sensor_t B 1 3180 26
|
||||||
|
esp_timer S 22 3044 3
|
||||||
|
gather_sensor_t B 1 2324 24
|
||||||
|
main B 1 892 4
|
||||||
|
gather_sensor_t S 1 1480 27
|
||||||
|
wifi B 23 3796 13
|
||||||
|
btController B 23 1864 15
|
||||||
|
flicker_gather_ S 24 1988 28
|
||||||
|
usb_console B 1 2840 9
|
||||||
|
|
||||||
|
W (14702) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (15433) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (15630) Flicker: Finished collecting samples, notifying main task
|
||||||
|
I (15632) Flicker: Collected 1024 samples for dominant frequency analysis
|
||||||
|
I (15639) SENSOR_GATHERER: Sensor should now be asleep
|
||||||
|
W (15650) AS7341: Reading spectral data from AS7341
|
||||||
|
I (15659) BME688: Delaying for 199517 microseconds
|
||||||
|
W (15710) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (15958) AS7341: Reading basic counts data from AS7341
|
||||||
|
W (15974) AS7341: Reading flicker detection state from AS7341
|
||||||
|
W (16194) as7341: FD Status Register: 0x20 (0b00100000)
|
||||||
|
I (16201) AS7341: Updating Matter attributes with AS7341 data: 10474
|
||||||
|
I (16202) esp_matter_attribute: ********** R : Endpoint 0x0001's Cluster 0x00000400's Attribute 0x00000000 is 0 **********
|
||||||
|
I (16208) esp_matter_attribute: ********** W : Endpoint 0x0001's Cluster 0x00000400's Attribute 0x00000000 is 10474 **********
|
||||||
|
E (16219) MAIN: [E-MAIN-03] Attribute update callback: endpoint_id: 1, cluster_id: 0x400, attribute_id: 0x0
|
||||||
|
E (16229) MAIN: [E-MAIN-03] Attribute update callback: endpoint_id: 1, cluster_id: 0x400, attribute_id: 0x0
|
||||||
|
W (16238) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (16241) esp_matter_attribute: ********** R : Endpoint 0x0001's Cluster 0x00000403's Attribute 0x00000000 is null **********
|
||||||
|
I (16256) esp_matter_attribute: ********** W : Endpoint 0x0001's Cluster 0x00000403's Attribute 0x00000000 is 1021 **********
|
||||||
|
E (16267) MAIN: [E-MAIN-03] Attribute update callback: endpoint_id: 1, cluster_id: 0x403, attribute_id: 0x0
|
||||||
|
E (16276) MAIN: [E-MAIN-03] Attribute update callback: endpoint_id: 1, cluster_id: 0x403, attribute_id: 0x0
|
||||||
|
W (16286) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (16434) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
W (16711) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (17183) wifi:Coexist: Wi-Fi connect fail, apply reconnect coex policy
|
||||||
|
|
||||||
|
I (17186) chip[DL]: Posting ESPSystemEvent: Wifi Event with eventId : 5
|
||||||
|
I (17187) chip[DL]: WIFI_EVENT_STA_DISCONNECTED
|
||||||
|
I (17190) chip[DL]: WiFi station state change: Connecting -> Connecting_Failed
|
||||||
|
W (17198) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
E (17203) chip[DL]: Failed to get configured network when updating network status: Error ESP32:0x0500300F
|
||||||
|
W (17212) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (17217) chip[DL]: WiFi station state change: Connecting_Failed -> NotConnected
|
||||||
|
W (17224) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
E (17229) chip[DL]: Failed to get configured network when updating network status: Error ESP32:0x0500300F
|
||||||
|
I (17239) chip[DL]: Next WiFi station reconnect in 100 ms
|
||||||
|
I (17243) chip[DL]: Done driving station state, nothing else to do...
|
||||||
|
W (17244) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (17291) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (17344) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (17346) chip[DL]: Attempting to connect WiFi station interface
|
||||||
|
I (17349) chip[DL]: WiFi station state change: NotConnected -> Connecting
|
||||||
|
W (17351) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
E (17356) chip[DL]: Failed to get configured network when updating network status: Error ESP32:0x0500300F
|
||||||
|
I (17366) chip[DL]: Done driving station state, nothing else to do...
|
||||||
|
W (17437) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
W (17712) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (18256) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (18292) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (18439) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
W (18713) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (19257) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (19293) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (19440) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (19615) SEN66: Sent start measurement command, waiting for sensor to be ready...
|
||||||
|
W (19714) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (19928) KOTA: cmd ping ok=1 fw=1.0.16 api=1
|
||||||
|
I (19933) KOTA: cmd wifi_get ok=1 ssid=- password_set=0 mode=matter
|
||||||
|
W (20258) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (20294) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (20441) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
W (20715) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (21259) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (21295) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (21442) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
W (21716) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (22166) wifi:Coexist: Wi-Fi connect fail, apply reconnect coex policy
|
||||||
|
|
||||||
|
I (22169) chip[DL]: Posting ESPSystemEvent: Wifi Event with eventId : 5
|
||||||
|
I (22170) chip[DL]: WIFI_EVENT_STA_DISCONNECTED
|
||||||
|
I (22173) chip[DL]: WiFi station state change: Connecting -> Connecting_Failed
|
||||||
|
W (22181) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
E (22186) chip[DL]: Failed to get configured network when updating network status: Error ESP32:0x0500300F
|
||||||
|
W (22196) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (22200) chip[DL]: WiFi station state change: Connecting_Failed -> NotConnected
|
||||||
|
W (22207) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
E (22212) chip[DL]: Failed to get configured network when updating network status: Error ESP32:0x0500300F
|
||||||
|
I (22222) chip[DL]: Next WiFi station reconnect in 100 ms
|
||||||
|
I (22226) chip[DL]: Done driving station state, nothing else to do...
|
||||||
|
W (22260) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (22296) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (22327) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (22328) chip[DL]: Attempting to connect WiFi station interface
|
||||||
|
I (22332) chip[DL]: WiFi station state change: NotConnected -> Connecting
|
||||||
|
W (22334) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
E (22340) chip[DL]: Failed to get configured network when updating network status: Error ESP32:0x0500300F
|
||||||
|
I (22349) chip[DL]: Done driving station state, nothing else to do...
|
||||||
|
W (22446) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (22574) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (22717) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (23075) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (23261) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (23297) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (23447) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (23576) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (23718) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (24077) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (24262) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (24299) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (24448) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (24570) OTA_CLIENT: HTTP client handle: 0x3fcf02e4
|
||||||
|
I (24578) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
I (24710) MICROPHONE: Read 600000 bytes in 9940 ms
|
||||||
|
I (24712) MICROPHONE: Read 600000 bytes of audio data
|
||||||
|
W (24719) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (25079) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (25264) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (25300) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (25449) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (25580) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (25720) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (26081) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (26265) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (26301) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (26450) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (26582) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (26721) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (27083) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
I (27150) wifi:Coexist: Wi-Fi connect fail, apply reconnect coex policy
|
||||||
|
|
||||||
|
I (27152) chip[DL]: Posting ESPSystemEvent: Wifi Event with eventId : 5
|
||||||
|
I (27154) chip[DL]: WIFI_EVENT_STA_DISCONNECTED
|
||||||
|
I (27157) chip[DL]: WiFi station state change: Connecting -> Connecting_Failed
|
||||||
|
W (27164) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
E (27169) chip[DL]: Failed to get configured network when updating network status: Error ESP32:0x0500300F
|
||||||
|
W (27179) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (27183) chip[DL]: WiFi station state change: Connecting_Failed -> NotConnected
|
||||||
|
W (27190) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
E (27196) chip[DL]: Failed to get configured network when updating network status: Error ESP32:0x0500300F
|
||||||
|
I (27205) chip[DL]: Next WiFi station reconnect in 100 ms
|
||||||
|
I (27209) chip[DL]: Done driving station state, nothing else to do...
|
||||||
|
W (27266) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (27302) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (27310) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (27311) chip[DL]: Attempting to connect WiFi station interface
|
||||||
|
I (27315) chip[DL]: WiFi station state change: NotConnected -> Connecting
|
||||||
|
W (27318) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
E (27323) chip[DL]: Failed to get configured network when updating network status: Error ESP32:0x0500300F
|
||||||
|
I (27332) chip[DL]: Done driving station state, nothing else to do...
|
||||||
|
W (27456) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (27584) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (27722) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (28085) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
I (28160) MICROPHONE: Raw block stats: mean=-17.8 min=-146018 max=134018
|
||||||
|
I (28161) MICROPHONE: Sum SQ: 0.578925, RMS pressure: 0.001701, Normalized: 0.001701, dB peak: -55.38
|
||||||
|
W (28166) SEN66: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (28267) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (28303) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (28457) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (28586) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (28723) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (29087) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (29172) SEN66: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (29268) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (29304) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (29458) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (29588) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (29724) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (30089) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (30173) SEN66: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (30269) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (30305) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (30459) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (30590) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (30725) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (31091) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (31174) SEN66: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (31270) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (31306) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (31460) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
E (31572) esp-tls: couldn't get hostname for :bin.kota-app.com: getaddrinfo() returns 202, addrinfo=0x0
|
||||||
|
E (31573) esp-tls: Failed to open new connection
|
||||||
|
E (31575) transport_base: Failed to open a new connection
|
||||||
|
E (31580) HTTP_CLIENT: Connection failed, sock < 0
|
||||||
|
E (31585) OTA_CLIENT: [E-OTA-01] Error ESP_ERR_HTTP_CONNECT at ./main/ota_client.cpp:355
|
||||||
|
I (31592) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
E (31593) OTA_CLIENT: [E-OTA-13] Failed to check for updates: ESP_ERR_HTTP_CONNECT
|
||||||
|
I (31606) KOTA: status OK -> CONNECTION_ERROR reason=ota_check_failed
|
||||||
|
W (31726) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (32098) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
I (32133) wifi:Coexist: Wi-Fi connect fail, apply reconnect coex policy
|
||||||
|
|
||||||
|
I (32135) chip[DL]: Posting ESPSystemEvent: Wifi Event with eventId : 5
|
||||||
|
I (32137) chip[DL]: WIFI_EVENT_STA_DISCONNECTED
|
||||||
|
I (32140) chip[DL]: WiFi station state change: Connecting -> Connecting_Failed
|
||||||
|
W (32147) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
E (32152) chip[DL]: Failed to get configured network when updating network status: Error ESP32:0x0500300F
|
||||||
|
W (32162) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (32166) chip[DL]: WiFi station state change: Connecting_Failed -> NotConnected
|
||||||
|
W (32173) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
W (32175) SEN66: RTC is uninitialized, using current time as timestamp
|
||||||
|
E (32179) chip[DL]: Failed to get configured network when updating network status: Error ESP32:0x0500300F
|
||||||
|
I (32194) chip[DL]: Next WiFi station reconnect in 100 ms
|
||||||
|
I (32199) chip[DL]: Done driving station state, nothing else to do...
|
||||||
|
W (32271) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (32300) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (32301) chip[DL]: Attempting to connect WiFi station interface
|
||||||
|
I (32305) chip[DL]: WiFi station state change: NotConnected -> Connecting
|
||||||
|
W (32307) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (32307) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
E (32319) chip[DL]: Failed to get configured network when updating network status: Error ESP32:0x0500300F
|
||||||
|
I (32328) chip[DL]: Done driving station state, nothing else to do...
|
||||||
|
W (32462) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (32599) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (32727) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (32730) chip[DL]: bleAdv Timeout : Start slow advertisement
|
||||||
|
I (32732) chip[DL]: Configuring CHIPoBLE advertising (interval 500 ms, connectable)
|
||||||
|
I (32737) chip[DL]: Device already advertising, stop active advertisement and restart
|
||||||
|
I (32744) NimBLE: GAP procedure initiated: stop advertising.
|
||||||
|
|
||||||
|
I (32750) NimBLE: GAP procedure initiated: advertise;
|
||||||
|
I (32754) NimBLE: disc_mode=2
|
||||||
|
I (32756) NimBLE: adv_channel_map=0 own_addr_type=1 adv_filter_policy=0 adv_itvl_min=800 adv_itvl_max=800
|
||||||
|
I (32767) NimBLE:
|
||||||
|
|
||||||
|
I (33100) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (33184) SEN66: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (33272) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (33320) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (33463) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (33601) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (33728) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (34102) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (34185) SEN66: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (34274) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (34321) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (34464) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (34603) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (34729) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (35104) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (35186) SEN66: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (35275) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (35322) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (35465) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (35605) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (35730) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (36106) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (36187) SEN66: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (36276) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (36323) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (36466) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (36607) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (36731) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (37107) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
I (37122) wifi:Coexist: Wi-Fi connect fail, apply reconnect coex policy
|
||||||
|
|
||||||
|
I (37125) chip[DL]: Posting ESPSystemEvent: Wifi Event with eventId : 5
|
||||||
|
I (37126) chip[DL]: WIFI_EVENT_STA_DISCONNECTED
|
||||||
|
I (37129) chip[DL]: WiFi station state change: Connecting -> Connecting_Failed
|
||||||
|
W (37137) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
E (37142) chip[DL]: Failed to get configured network when updating network status: Error ESP32:0x0500300F
|
||||||
|
W (37151) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (37156) chip[DL]: WiFi station state change: Connecting_Failed -> NotConnected
|
||||||
|
W (37163) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
E (37168) chip[DL]: Failed to get configured network when updating network status: Error ESP32:0x0500300F
|
||||||
|
I (37178) chip[DL]: Next WiFi station reconnect in 100 ms
|
||||||
|
I (37182) chip[DL]: Done driving station state, nothing else to do...
|
||||||
|
W (37188) SEN66: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (37277) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (37283) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (37284) chip[DL]: Attempting to connect WiFi station interface
|
||||||
|
I (37287) chip[DL]: WiFi station state change: NotConnected -> Connecting
|
||||||
|
W (37290) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
E (37295) chip[DL]: Failed to get configured network when updating network status: Error ESP32:0x0500300F
|
||||||
|
I (37305) chip[DL]: Done driving station state, nothing else to do...
|
||||||
|
W (37324) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (37468) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (37608) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (37732) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (38109) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (38195) SEN66: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (38278) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (38325) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (38470) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (38610) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (38733) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (39111) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (39196) SEN66: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (39279) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (39326) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (39471) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (39612) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (39736) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (40113) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (40197) SEN66: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (40280) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (40326) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (40473) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (40614) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (40737) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (41115) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (41198) SEN66: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (41281) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (41327) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (41474) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (41616) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (41738) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (42105) wifi:Coexist: Wi-Fi connect fail, apply reconnect coex policy
|
||||||
|
|
||||||
|
I (42108) chip[DL]: Posting ESPSystemEvent: Wifi Event with eventId : 5
|
||||||
|
I (42109) chip[DL]: WIFI_EVENT_STA_DISCONNECTED
|
||||||
|
I (42112) chip[DL]: WiFi station state change: Connecting -> Connecting_Failed
|
||||||
|
I (42116) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (42120) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
E (42130) chip[DL]: Failed to get configured network when updating network status: Error ESP32:0x0500300F
|
||||||
|
W (42140) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (42144) chip[DL]: WiFi station state change: Connecting_Failed -> NotConnected
|
||||||
|
W (42151) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
E (42156) chip[DL]: Failed to get configured network when updating network status: Error ESP32:0x0500300F
|
||||||
|
I (42166) chip[DL]: Next WiFi station reconnect in 100 ms
|
||||||
|
I (42170) chip[DL]: Done driving station state, nothing else to do...
|
||||||
|
W (42199) SEN66: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (42271) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (42272) chip[DL]: Attempting to connect WiFi station interface
|
||||||
|
I (42275) chip[DL]: WiFi station state change: NotConnected -> Connecting
|
||||||
|
W (42278) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
W (42283) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
E (42283) chip[DL]: Failed to get configured network when updating network status: Error ESP32:0x0500300F
|
||||||
|
I (42299) chip[DL]: Done driving station state, nothing else to do...
|
||||||
|
W (42328) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (42476) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (42625) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (42739) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (43126) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (43200) SEN66: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (43290) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (43329) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (43482) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (43627) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (43740) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (44128) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (44201) SEN66: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (44291) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (44330) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (44486) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (44629) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (44741) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (45130) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (45202) SEN66: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (45292) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (45331) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (45487) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (45631) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (45742) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (46132) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (46203) SEN66: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (46293) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (46332) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (46488) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (46633) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (46743) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (47093) wifi:Coexist: Wi-Fi connect fail, apply reconnect coex policy
|
||||||
|
|
||||||
|
I (47095) chip[DL]: Posting ESPSystemEvent: Wifi Event with eventId : 5
|
||||||
|
I (47097) chip[DL]: WIFI_EVENT_STA_DISCONNECTED
|
||||||
|
I (47100) chip[DL]: WiFi station state change: Connecting -> Connecting_Failed
|
||||||
|
W (47107) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
E (47112) chip[DL]: Failed to get configured network when updating network status: Error ESP32:0x0500300F
|
||||||
|
W (47122) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (47126) chip[DL]: WiFi station state change: Connecting_Failed -> NotConnected
|
||||||
|
I (47134) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (47134) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
E (47144) chip[DL]: Failed to get configured network when updating network status: Error ESP32:0x0500300F
|
||||||
|
I (47154) chip[DL]: Next WiFi station reconnect in 100 ms
|
||||||
|
I (47158) chip[DL]: Done driving station state, nothing else to do...
|
||||||
|
W (47204) SEN66: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (47259) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (47260) chip[DL]: Attempting to connect WiFi station interface
|
||||||
|
I (47263) chip[DL]: WiFi station state change: NotConnected -> Connecting
|
||||||
|
W (47266) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
E (47271) chip[DL]: Failed to get configured network when updating network status: Error ESP32:0x0500300F
|
||||||
|
I (47281) chip[DL]: Done driving station state, nothing else to do...
|
||||||
|
W (47294) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (47333) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (47493) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (47639) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (47744) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (48140) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (48205) SEN66: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (48295) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (48334) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (48495) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (48641) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (48747) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (49142) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (49206) SEN66: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (49296) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (49335) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (49496) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (49643) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (49748) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (50144) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (50207) SEN66: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (50297) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (50336) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (50498) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (50645) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (50749) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (51146) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (51208) SEN66: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (51298) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (51337) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (51500) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (51647) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (51750) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (52081) wifi:Coexist: Wi-Fi connect fail, apply reconnect coex policy
|
||||||
|
|
||||||
|
I (52084) chip[DL]: Posting ESPSystemEvent: Wifi Event with eventId : 5
|
||||||
|
I (52085) chip[DL]: WIFI_EVENT_STA_DISCONNECTED
|
||||||
|
I (52088) chip[DL]: WiFi station state change: Connecting -> Connecting_Failed
|
||||||
|
W (52096) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
E (52100) chip[DL]: Failed to get configured network when updating network status: Error ESP32:0x0500300F
|
||||||
|
W (52110) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (52115) chip[DL]: WiFi station state change: Connecting_Failed -> NotConnected
|
||||||
|
W (52122) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
E (52127) chip[DL]: Failed to get configured network when updating network status: Error ESP32:0x0500300F
|
||||||
|
I (52136) chip[DL]: Next WiFi station reconnect in 100 ms
|
||||||
|
I (52141) chip[DL]: Done driving station state, nothing else to do...
|
||||||
|
I (52148) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (52209) SEN66: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (52242) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (52243) chip[DL]: Attempting to connect WiFi station interface
|
||||||
|
I (52246) chip[DL]: WiFi station state change: NotConnected -> Connecting
|
||||||
|
W (52249) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
E (52254) chip[DL]: Failed to get configured network when updating network status: Error ESP32:0x0500300F
|
||||||
|
I (52264) chip[DL]: Done driving station state, nothing else to do...
|
||||||
|
W (52299) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (52338) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (52508) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (52653) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (52751) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (53154) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (53210) SEN66: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (53300) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (53339) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (53509) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (53655) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (53752) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (54156) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (54212) SEN66: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (54301) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (54340) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (54510) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (54657) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (54753) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (55158) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (55213) SEN66: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (55302) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (55341) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (55511) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (55659) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (55754) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (56160) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (56214) SEN66: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (56303) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (56342) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (56512) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (56661) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (56755) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (57064) wifi:Coexist: Wi-Fi connect fail, apply reconnect coex policy
|
||||||
|
|
||||||
|
I (57067) chip[DL]: Posting ESPSystemEvent: Wifi Event with eventId : 5
|
||||||
|
I (57068) chip[DL]: WIFI_EVENT_STA_DISCONNECTED
|
||||||
|
I (57071) chip[DL]: WiFi station state change: Connecting -> Connecting_Failed
|
||||||
|
W (57079) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
E (57083) chip[DL]: Failed to get configured network when updating network status: Error ESP32:0x0500300F
|
||||||
|
W (57093) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (57097) chip[DL]: WiFi station state change: Connecting_Failed -> NotConnected
|
||||||
|
W (57105) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
E (57110) chip[DL]: Failed to get configured network when updating network status: Error ESP32:0x0500300F
|
||||||
|
I (57119) chip[DL]: Next WiFi station reconnect in 100 ms
|
||||||
|
I (57124) chip[DL]: Done driving station state, nothing else to do...
|
||||||
|
I (57162) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (57215) SEN66: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (57225) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (57226) chip[DL]: Attempting to connect WiFi station interface
|
||||||
|
I (57230) chip[DL]: WiFi station state change: NotConnected -> Connecting
|
||||||
|
W (57232) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
E (57237) chip[DL]: Failed to get configured network when updating network status: Error ESP32:0x0500300F
|
||||||
|
I (57247) chip[DL]: Done driving station state, nothing else to do...
|
||||||
|
W (57304) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (57344) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (57517) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (57663) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (57756) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (58164) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (58216) SEN66: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (58305) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (58345) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (58518) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (58665) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (58757) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (59166) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (59217) SEN66: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (59306) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (59346) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (59519) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (59667) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (59758) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (60168) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (60218) SEN66: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (60307) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (60346) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (60520) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (60669) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (60759) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (61170) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (61219) SEN66: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (61308) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (61347) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (61521) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (61671) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (61760) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (62047) wifi:Coexist: Wi-Fi connect fail, apply reconnect coex policy
|
||||||
|
|
||||||
|
I (62050) chip[DL]: Posting ESPSystemEvent: Wifi Event with eventId : 5
|
||||||
|
I (62051) chip[DL]: WIFI_EVENT_STA_DISCONNECTED
|
||||||
|
I (62054) chip[DL]: WiFi station state change: Connecting -> Connecting_Failed
|
||||||
|
W (62062) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
E (62067) chip[DL]: Failed to get configured network when updating network status: Error ESP32:0x0500300F
|
||||||
|
W (62076) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (62081) chip[DL]: WiFi station state change: Connecting_Failed -> NotConnected
|
||||||
|
W (62088) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
E (62093) chip[DL]: Failed to get configured network when updating network status: Error ESP32:0x0500300F
|
||||||
|
I (62102) chip[DL]: Next WiFi station reconnect in 100 ms
|
||||||
|
I (62107) chip[DL]: Done driving station state, nothing else to do...
|
||||||
|
I (62172) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (62208) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (62209) chip[DL]: Attempting to connect WiFi station interface
|
||||||
|
I (62212) chip[DL]: WiFi station state change: NotConnected -> Connecting
|
||||||
|
W (62215) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
W (62220) SEN66: RTC is uninitialized, using current time as timestamp
|
||||||
|
E (62220) chip[DL]: Failed to get configured network when updating network status: Error ESP32:0x0500300F
|
||||||
|
I (62236) chip[DL]: Done driving station state, nothing else to do...
|
||||||
|
W (62309) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (62348) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (62527) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (62673) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (62761) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (62925) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (62925) KOTA: health up=61s status=CONNECTION_ERROR wifi=disconnected rssi=0 time_valid=0 sd=ok buffer=0 heap=47259 psram=7.3M last_upload=never ota=registered
|
||||||
|
I (63174) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (63227) SEN66: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (63310) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (63349) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (63528) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (63675) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (63762) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (64176) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (64228) SEN66: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (64311) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (64350) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (64529) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (64617) SEN66: First measurement, waiting additional 120 seconds for sensor to stabilize...
|
||||||
|
I (64677) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (64763) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (65178) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (65229) SEN66: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (65312) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (65351) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (65530) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (65679) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (65764) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (66180) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (66230) SEN66: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (66313) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (66352) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (66531) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (66681) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (66765) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (67030) wifi:Coexist: Wi-Fi connect fail, apply reconnect coex policy
|
||||||
|
|
||||||
|
I (67033) chip[DL]: Posting ESPSystemEvent: Wifi Event with eventId : 5
|
||||||
|
I (67034) chip[DL]: WIFI_EVENT_STA_DISCONNECTED
|
||||||
|
I (67037) chip[DL]: WiFi station state change: Connecting -> Connecting_Failed
|
||||||
|
W (67045) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
E (67049) chip[DL]: Failed to get configured network when updating network status: Error ESP32:0x0500300F
|
||||||
|
W (67059) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (67063) chip[DL]: WiFi station state change: Connecting_Failed -> NotConnected
|
||||||
|
W (67071) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
E (67076) chip[DL]: Failed to get configured network when updating network status: Error ESP32:0x0500300F
|
||||||
|
I (67085) chip[DL]: Next WiFi station reconnect in 100 ms
|
||||||
|
I (67090) chip[DL]: Done driving station state, nothing else to do...
|
||||||
|
I (67182) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (67191) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (67192) chip[DL]: Attempting to connect WiFi station interface
|
||||||
|
I (67195) chip[DL]: WiFi station state change: NotConnected -> Connecting
|
||||||
|
W (67198) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
E (67203) chip[DL]: Failed to get configured network when updating network status: Error ESP32:0x0500300F
|
||||||
|
I (67213) chip[DL]: Done driving station state, nothing else to do...
|
||||||
|
W (67231) SEN66: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (67314) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (67353) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (67537) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (67683) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (67766) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (68184) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (68232) SEN66: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (68315) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (68354) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (68542) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (68685) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (68767) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (69186) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (69233) SEN66: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (69316) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (69355) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (69546) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (69687) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (69768) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (70188) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (70234) SEN66: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (70317) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (70356) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (70547) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (70689) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (70769) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (71190) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (71235) SEN66: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (71318) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (71357) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (71548) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (71691) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (71770) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (72013) wifi:Coexist: Wi-Fi connect fail, apply reconnect coex policy
|
||||||
|
|
||||||
|
I (72015) chip[DL]: Posting ESPSystemEvent: Wifi Event with eventId : 5
|
||||||
|
I (72017) chip[DL]: WIFI_EVENT_STA_DISCONNECTED
|
||||||
|
I (72020) chip[DL]: WiFi station state change: Connecting -> Connecting_Failed
|
||||||
|
W (72027) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
E (72032) chip[DL]: Failed to get configured network when updating network status: Error ESP32:0x0500300F
|
||||||
|
W (72042) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (72046) chip[DL]: WiFi station state change: Connecting_Failed -> NotConnected
|
||||||
|
W (72054) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
E (72059) chip[DL]: Failed to get configured network when updating network status: Error ESP32:0x0500300F
|
||||||
|
I (72068) chip[DL]: Next WiFi station reconnect in 100 ms
|
||||||
|
I (72073) chip[DL]: Done driving station state, nothing else to do...
|
||||||
|
W (72173) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (72175) chip[DL]: Attempting to connect WiFi station interface
|
||||||
|
I (72178) chip[DL]: WiFi station state change: NotConnected -> Connecting
|
||||||
|
W (72181) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
E (72185) chip[DL]: Failed to get configured network when updating network status: Error ESP32:0x0500300F
|
||||||
|
I (72191) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
I (72195) chip[DL]: Done driving station state, nothing else to do...
|
||||||
|
W (72236) SEN66: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (72319) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (72358) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (72552) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (72700) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (72771) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (73201) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (73237) SEN66: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (73320) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (73359) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (73553) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (73702) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (73772) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
I (74203) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (74238) SEN66: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (74321) AS7341: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (74360) BME688: RTC is uninitialized, using current time as timestamp
|
||||||
|
W (74555) wifi:Haven't to connect to a suitable AP now!
|
||||||
|
I (74581) SENSOR_GATHERER: 3/4 tasks still running, waiting...
|
||||||
|
I (74627) INFLUX_BUFFER: Buffer file does not exist, returning empty buffer
|
||||||
|
I (74628) INFLUX_BUFFER: Buffer is empty, nothing to flush
|
||||||
|
I (74704) SENSOR_GATHERER: 2/2 tasks still running, waiting...
|
||||||
|
W (74773) DeviceStatus: RTC is uninitialized, using current time as timestamp
|
||||||
|
--- disconnected ---
|
||||||
@@ -0,0 +1,177 @@
|
|||||||
|
"""Wi-Fi over USB (firmware usb_console api=1): encoding, replies and the whole
|
||||||
|
write/clear/read job, driven with reply lines in the firmware's exact format."""
|
||||||
|
|
||||||
|
import pytest
|
||||||
|
|
||||||
|
from kota_tech.core.logline import parse_line
|
||||||
|
from kota_tech.diag.engine import DiagnosticsEngine
|
||||||
|
from kota_tech.serialio.commands import (
|
||||||
|
CONNECT_TIMEOUT_S, PING_TIMEOUT_S, Step, WifiFlow, loggable, parse_reply, validate_wifi, wifi_set_command)
|
||||||
|
|
||||||
|
PING = "I (5000) KOTA: cmd ping ok=1 fw=1.0.16 api=1"
|
||||||
|
BOOT = ("I (2843) KOTA: boot fw=1.0.16 build=3ae273ec hw=2 mac=A4CB8FC946F8 reset=RTC_SW_SYS_RST "
|
||||||
|
"mode={mode} commissioned=- last_restart={last}")
|
||||||
|
HEALTH = ("I (9000) KOTA: cmd health ok=1 up=9s status=OK wifi={wifi} rssi={rssi} time_valid=1 sd=ok buffer=0 "
|
||||||
|
"heap=90000 psram=7.6M last_upload=never ota=registered")
|
||||||
|
|
||||||
|
|
||||||
|
class Clock:
|
||||||
|
def __init__(self):
|
||||||
|
self.t = 0.0
|
||||||
|
|
||||||
|
def __call__(self):
|
||||||
|
return self.t
|
||||||
|
|
||||||
|
|
||||||
|
def make(action, **kw):
|
||||||
|
sent, events, clock = [], [], Clock()
|
||||||
|
flow = WifiFlow(action, lambda c: sent.append(c) or True, events.append, now=clock, **kw)
|
||||||
|
return flow, sent, events, clock
|
||||||
|
|
||||||
|
|
||||||
|
def feed(flow, text):
|
||||||
|
flow.feed(parse_line(text))
|
||||||
|
|
||||||
|
|
||||||
|
# ------------------------------------------------------------- encoding
|
||||||
|
|
||||||
|
def test_wifi_set_command_is_hex_utf8():
|
||||||
|
assert wifi_set_command("Biuro 2.4", "tajne=haslo1") == \
|
||||||
|
"kota wifi set 426975726f20322e34 74616a6e653d6861736c6f31"
|
||||||
|
assert wifi_set_command("Łąka", "zażółć1234").split()[3] == "c581c4856b61"
|
||||||
|
|
||||||
|
|
||||||
|
@pytest.mark.parametrize("ssid,password,problem", [
|
||||||
|
("", "12345678", "network name"),
|
||||||
|
("x" * 33, "12345678", "32 bytes"),
|
||||||
|
("net", "1234567", "8-63"),
|
||||||
|
("net", "x" * 64, "8-63"),
|
||||||
|
("net\n", "12345678", "line break"),
|
||||||
|
])
|
||||||
|
def test_validation_matches_firmware_limits(ssid, password, problem):
|
||||||
|
assert any(problem in p for p in validate_wifi(ssid, password))
|
||||||
|
with pytest.raises(ValueError):
|
||||||
|
wifi_set_command(ssid, password)
|
||||||
|
|
||||||
|
|
||||||
|
def test_password_never_logged():
|
||||||
|
cmd = wifi_set_command("Biuro", "sekretne-haslo")
|
||||||
|
assert "sekretne" not in loggable(cmd) and "7365" not in loggable(cmd)
|
||||||
|
assert "Biuro" in loggable(cmd)
|
||||||
|
|
||||||
|
|
||||||
|
def test_reply_parsing():
|
||||||
|
r = parse_reply(parse_line("I (1) KOTA: cmd wifi_set ok=0 err=password_length"))
|
||||||
|
assert r.name == "wifi_set" and not r.ok and "8-63" in r.error
|
||||||
|
assert parse_reply(parse_line("I (1) KOTA: health up=1s")) is None
|
||||||
|
|
||||||
|
|
||||||
|
# ----------------------------------------------------------------- flows
|
||||||
|
|
||||||
|
def test_write_wifi_happy_path():
|
||||||
|
flow, sent, events, clock = make("set", ssid="Biuro", password="haslo1234")
|
||||||
|
flow.start()
|
||||||
|
assert sent == ["kota ping"]
|
||||||
|
feed(flow, PING)
|
||||||
|
assert sent[-1] == wifi_set_command("Biuro", "haslo1234") and flow.step == Step.SEND
|
||||||
|
feed(flow, "I (5100) KOTA: cmd wifi_set ok=1 restart=1")
|
||||||
|
assert flow.step == Step.RESTART
|
||||||
|
feed(flow, "W (5101) KOTA: restart reason=usb_wifi_set")
|
||||||
|
feed(flow, BOOT.format(mode="wifi", last="usb_wifi_set"))
|
||||||
|
assert flow.step == Step.CONNECT
|
||||||
|
clock.t += 6
|
||||||
|
flow.tick()
|
||||||
|
assert sent[-1] == "kota health"
|
||||||
|
feed(flow, HEALTH.format(wifi="disconnected", rssi=0))
|
||||||
|
assert flow.step == Step.CONNECT
|
||||||
|
feed(flow, HEALTH.format(wifi="connected", rssi=-58))
|
||||||
|
assert flow.step == Step.DONE and "Connected to 'Biuro'" in events[-1].text and "-58" in events[-1].text
|
||||||
|
|
||||||
|
|
||||||
|
def test_old_firmware_without_console_times_out_on_ping():
|
||||||
|
flow, sent, events, clock = make("read")
|
||||||
|
flow.start()
|
||||||
|
clock.t += PING_TIMEOUT_S + 0.1
|
||||||
|
flow.tick()
|
||||||
|
assert flow.step == Step.FAILED and "USB console" in events[-1].text
|
||||||
|
|
||||||
|
|
||||||
|
def test_box_rejects_settings():
|
||||||
|
flow, sent, events, _ = make("set", ssid="Biuro", password="haslo1234")
|
||||||
|
flow.start()
|
||||||
|
feed(flow, PING)
|
||||||
|
feed(flow, "I (5100) KOTA: cmd wifi_set ok=0 err=sd_not_mounted")
|
||||||
|
assert flow.step == Step.FAILED and "SD card" in events[-1].text
|
||||||
|
|
||||||
|
|
||||||
|
def test_wrong_password_does_not_connect():
|
||||||
|
flow, _, events, clock = make("set", ssid="Biuro", password="zlehaslo1")
|
||||||
|
flow.start()
|
||||||
|
feed(flow, PING)
|
||||||
|
feed(flow, "I (5100) KOTA: cmd wifi_set ok=1 restart=1")
|
||||||
|
feed(flow, BOOT.format(mode="wifi", last="usb_wifi_set"))
|
||||||
|
clock.t += CONNECT_TIMEOUT_S + 1
|
||||||
|
flow.tick()
|
||||||
|
assert flow.step == Step.FAILED and "2.4 GHz" in events[-1].text
|
||||||
|
|
||||||
|
|
||||||
|
def test_clear_returns_to_matter():
|
||||||
|
flow, sent, events, _ = make("clear")
|
||||||
|
flow.start()
|
||||||
|
feed(flow, PING)
|
||||||
|
assert sent[-1] == "kota wifi clear"
|
||||||
|
feed(flow, "I (5100) KOTA: cmd wifi_clear ok=1 restart=1")
|
||||||
|
feed(flow, BOOT.format(mode="matter", last="usb_wifi_clear"))
|
||||||
|
assert flow.step == Step.DONE and "Matter" in events[-1].text
|
||||||
|
|
||||||
|
|
||||||
|
def test_read_current_settings():
|
||||||
|
flow, sent, events, _ = make("read")
|
||||||
|
flow.start()
|
||||||
|
feed(flow, PING)
|
||||||
|
assert sent[-1] == "kota wifi get"
|
||||||
|
feed(flow, "I (5100) KOTA: cmd wifi_get ok=1 ssid=426975726f password_set=1 mode=wifi")
|
||||||
|
assert flow.step == Step.DONE and flow.info.ssid == "Biuro" and flow.info.password_set
|
||||||
|
assert "local Wi-Fi" in events[-1].text
|
||||||
|
|
||||||
|
|
||||||
|
def test_not_connected():
|
||||||
|
events = []
|
||||||
|
flow = WifiFlow("read", lambda c: False, events.append)
|
||||||
|
flow.start()
|
||||||
|
assert flow.step == Step.FAILED and "not connected" in events[-1].text
|
||||||
|
|
||||||
|
|
||||||
|
# ---------------------------------------------------------------- engine
|
||||||
|
|
||||||
|
def test_engine_treats_usb_wifi_restart_as_intentional_and_reads_replies():
|
||||||
|
e = DiagnosticsEngine()
|
||||||
|
for t in ["ESP-ROM:esp32s3-20210327", "I (1790) KOTA: i2c SDA=1 SCL=1 0x39=AS7341",
|
||||||
|
BOOT.format(mode="matter", last="none"), PING,
|
||||||
|
"I (5100) KOTA: cmd wifi_set ok=1 restart=1", "W (5101) KOTA: restart reason=usb_wifi_set",
|
||||||
|
"ESP-ROM:esp32s3-20210327", "rst:0x3 (RTC_SW_SYS_RST),boot:0xb (SPI_FAST_FLASH_BOOT)",
|
||||||
|
BOOT.format(mode="wifi", last="usb_wifi_set"),
|
||||||
|
"I (6000) KOTA: cmd wifi_get ok=1 ssid=426975726f password_set=1 mode=wifi",
|
||||||
|
HEALTH.format(wifi="connected", rssi=-60)]:
|
||||||
|
e.feed(parse_line(t))
|
||||||
|
r = e.report()
|
||||||
|
assert not any(f.rule_id.startswith("reboot.") for rc in r.roots for f in [rc.finding, *rc.consequences])
|
||||||
|
assert e.console_api == 1
|
||||||
|
box = dict((t, x) for t, x, _ in r.box)
|
||||||
|
assert "network 'Biuro'" in box["Wi-Fi config"] and "Wi-Fi connected (-60 dBm)" in box["Health"]
|
||||||
|
assert any(m == "wifi_connected" and t is not None for m, _, t in r.milestones)
|
||||||
|
|
||||||
|
|
||||||
|
def test_live_v13_box_answers_usb_commands():
|
||||||
|
# Real capture (2026-09-29): box 14:C1:9F:57:72:48 after flashing merged-binary-v13.bin App-only;
|
||||||
|
# the Wi-Fi tab's read flow sent "kota ping" and "kota wifi get".
|
||||||
|
from pathlib import Path
|
||||||
|
|
||||||
|
from kota_tech.core.logfile import read_log_file
|
||||||
|
e = DiagnosticsEngine()
|
||||||
|
for ln in read_log_file(Path(__file__).parent / "fixtures" / "live_boot_14C19F577248_v13_usb_console.txt"):
|
||||||
|
e.feed(ln)
|
||||||
|
r = e.report()
|
||||||
|
assert e.firmware.elf_sha.startswith("3ae273ec") and e.console_api == 1
|
||||||
|
assert dict((t, x) for t, x, _ in r.box)["Wi-Fi config"] == "no network on the SD card, mode matter"
|
||||||
|
assert not any(f.rule_id.startswith("other.") for f in e.findings.values()) # logs intact via the driver
|
||||||
@@ -0,0 +1,19 @@
|
|||||||
|
"""The whole window builds (catches errors that only show when the app starts)."""
|
||||||
|
|
||||||
|
import os
|
||||||
|
|
||||||
|
os.environ.setdefault("QT_QPA_PLATFORM", "offscreen")
|
||||||
|
|
||||||
|
|
||||||
|
def test_main_window_builds_with_all_tabs():
|
||||||
|
from PySide6.QtWidgets import QApplication
|
||||||
|
|
||||||
|
from kota_tech.ui.main_window import MainWindow
|
||||||
|
app = QApplication.instance() or QApplication([])
|
||||||
|
w = MainWindow()
|
||||||
|
tabs = w.centralWidget()
|
||||||
|
assert [tabs.tabText(i) for i in range(tabs.count())] == \
|
||||||
|
["Quick start", "Serial monitor", "Flash firmware", "Wi-Fi (USB)", "SD card"]
|
||||||
|
assert not w.wifi_tab.write_btn.isEnabled() # nothing connected, nothing typed
|
||||||
|
w.serial_tab.shutdown()
|
||||||
|
app.processEvents()
|
||||||
Executable
+74
@@ -0,0 +1,74 @@
|
|||||||
|
#!/bin/bash
|
||||||
|
# KOTA Sensorbox Technician Tool - update to the newest released version.
|
||||||
|
# Checks Gitea for the newest release tag (vX.Y) and downloads only what changed (git).
|
||||||
|
# Works in a git clone and in a folder unpacked from a release zip (it is connected on first run).
|
||||||
|
# If Finder refuses to open this file, run it once as: bash update_macos.command
|
||||||
|
cd "$(dirname "$0")" || exit 1
|
||||||
|
|
||||||
|
REPO_URL="${KOTA_REPO_URL:-https://gitea.kota-app.com/kkallas/kota-technician-tool.git}"
|
||||||
|
export UV_PROJECT_ENVIRONMENT="${UV_PROJECT_ENVIRONMENT:-$HOME/Library/Caches/KotaTechnicianTool/venv}"
|
||||||
|
export PATH="$HOME/.local/bin:$PATH"
|
||||||
|
|
||||||
|
finish() {
|
||||||
|
[ -z "$KOTA_NO_PAUSE" ] && [ -t 0 ] && read -r -p "Press Enter to close..." _
|
||||||
|
exit "$1"
|
||||||
|
}
|
||||||
|
fail() { echo; echo "[!] $*"; echo "[!] Update did not finish."; finish 1; }
|
||||||
|
|
||||||
|
# ---- git (macOS: the Command Line Tools installer offers it) --------------
|
||||||
|
if ! git --version >/dev/null 2>&1; then
|
||||||
|
if [ "$(uname)" = Darwin ]; then
|
||||||
|
xcode-select --install >/dev/null 2>&1
|
||||||
|
fail "Git is being installed (Apple Command Line Tools). Run this again when the installer has finished."
|
||||||
|
fi
|
||||||
|
fail "Git is not installed."
|
||||||
|
fi
|
||||||
|
|
||||||
|
# ---- connect a folder unpacked from a zip ----------------------------------
|
||||||
|
if [ ! -d .git ]; then
|
||||||
|
echo "Connecting this folder to $REPO_URL ..."
|
||||||
|
git init -q && git remote add origin "$REPO_URL" || fail "Cannot set up git in this folder."
|
||||||
|
fi
|
||||||
|
|
||||||
|
# A developer copy follows a branch; it is updated with "git pull", not here.
|
||||||
|
if git rev-parse -q --verify HEAD >/dev/null 2>&1 && branch=$(git symbolic-ref -q --short HEAD); then
|
||||||
|
echo "This is a developer copy on branch $branch. Update it with: git pull"
|
||||||
|
finish 0
|
||||||
|
fi
|
||||||
|
|
||||||
|
echo "Checking for a new version..."
|
||||||
|
git fetch --quiet --force --tags origin ||
|
||||||
|
fail "Cannot reach $REPO_URL. Check the Internet connection and your Gitea login, then try again."
|
||||||
|
|
||||||
|
latest=$(git tag -l 'v*' --sort=-v:refname | head -n 1)
|
||||||
|
[ -n "$latest" ] || fail "No released version found on the server."
|
||||||
|
current=$(git describe --tags --exact-match HEAD 2>/dev/null)
|
||||||
|
|
||||||
|
if [ "$current" = "$latest" ]; then
|
||||||
|
echo "You already have the newest version $latest."
|
||||||
|
else
|
||||||
|
if [ -n "$current" ]; then
|
||||||
|
if [ -n "$(git status --porcelain --untracked-files=no)" ]; then
|
||||||
|
echo "Some tool files in this folder were changed by hand. They will be replaced by $latest."
|
||||||
|
read -r -p "Continue? [y/N] " answer
|
||||||
|
[[ "$answer" =~ ^[Yy]$ ]] || fail "Cancelled."
|
||||||
|
fi
|
||||||
|
echo "Updating $current -> $latest. Changes:"
|
||||||
|
git --no-pager log --oneline --no-decorate "$current..$latest"
|
||||||
|
else
|
||||||
|
echo "Installing $latest..."
|
||||||
|
fi
|
||||||
|
git -c advice.detachedHead=false checkout -q -f "$latest" || fail "Checkout of $latest failed."
|
||||||
|
echo "Now on $latest."
|
||||||
|
fi
|
||||||
|
|
||||||
|
# ---- Python libraries (only what changed) ----------------------------------
|
||||||
|
if ! command -v uv >/dev/null 2>&1; then
|
||||||
|
echo "Installing uv (Python package runner, current user only)..."
|
||||||
|
curl -LsSf https://astral.sh/uv/install.sh | sh || fail "uv installation failed. Ask the firmware team for help."
|
||||||
|
fi
|
||||||
|
echo "Checking Python libraries..."
|
||||||
|
uv sync --frozen --no-dev --python 3.12 --quiet || fail "Installing Python libraries failed."
|
||||||
|
echo
|
||||||
|
echo "Done. Start the tool with run_macos.command."
|
||||||
|
finish 0
|
||||||
@@ -0,0 +1,107 @@
|
|||||||
|
@echo off
|
||||||
|
rem KOTA Sensorbox Technician Tool - update to the newest released version.
|
||||||
|
rem Checks Gitea for the newest release tag (vX.Y) and downloads only what changed (git).
|
||||||
|
rem Works in a git clone and in a folder unpacked from a release zip (it is connected on first run).
|
||||||
|
setlocal EnableDelayedExpansion
|
||||||
|
cd /d "%~dp0"
|
||||||
|
title KOTA Technician Tool - update
|
||||||
|
|
||||||
|
if not defined KOTA_REPO_URL set "KOTA_REPO_URL=https://gitea.kota-app.com/kkallas/kota-technician-tool.git"
|
||||||
|
set "UV_PROJECT_ENVIRONMENT=%LOCALAPPDATA%\KotaTechnicianTool\venv"
|
||||||
|
set "PATH=%USERPROFILE%\.local\bin;%ProgramFiles%\Git\cmd;%PATH%"
|
||||||
|
|
||||||
|
rem ---- git ----------------------------------------------------------------
|
||||||
|
where git >nul 2>nul
|
||||||
|
if errorlevel 1 (
|
||||||
|
echo Git is not installed. It is needed to download updates.
|
||||||
|
choice /m "Install Git for Windows now"
|
||||||
|
if errorlevel 2 goto :fail
|
||||||
|
winget install --id Git.Git -e --source winget --accept-package-agreements
|
||||||
|
where git >nul 2>nul
|
||||||
|
if errorlevel 1 (
|
||||||
|
echo ERROR: Git installation failed. Install it from https://git-scm.com and run this again.
|
||||||
|
goto :fail
|
||||||
|
)
|
||||||
|
)
|
||||||
|
|
||||||
|
rem ---- connect a folder unpacked from a zip ---------------------------------
|
||||||
|
if not exist ".git" (
|
||||||
|
echo Connecting this folder to %KOTA_REPO_URL% ...
|
||||||
|
git init -q || goto :fail
|
||||||
|
git remote add origin "%KOTA_REPO_URL%" || goto :fail
|
||||||
|
)
|
||||||
|
|
||||||
|
rem A developer copy follows a branch; it is updated with "git pull", not here.
|
||||||
|
git rev-parse -q --verify HEAD >nul 2>nul
|
||||||
|
if not errorlevel 1 (
|
||||||
|
for /f "delims=" %%b in ('git symbolic-ref -q --short HEAD 2^>nul') do (
|
||||||
|
echo This is a developer copy on branch %%b. Update it with: git pull
|
||||||
|
goto :done
|
||||||
|
)
|
||||||
|
)
|
||||||
|
|
||||||
|
echo Checking for a new version...
|
||||||
|
git fetch --quiet --force --tags origin
|
||||||
|
if errorlevel 1 (
|
||||||
|
echo ERROR: Cannot reach %KOTA_REPO_URL%.
|
||||||
|
echo Check the Internet connection and your Gitea login, then try again.
|
||||||
|
goto :fail
|
||||||
|
)
|
||||||
|
|
||||||
|
set "LATEST="
|
||||||
|
for /f "delims=" %%t in ('git tag -l "v*" --sort^=-v:refname') do if not defined LATEST set "LATEST=%%t"
|
||||||
|
if not defined LATEST (
|
||||||
|
echo ERROR: No released version found on the server.
|
||||||
|
goto :fail
|
||||||
|
)
|
||||||
|
set "CURRENT="
|
||||||
|
for /f "delims=" %%t in ('git describe --tags --exact-match HEAD 2^>nul') do set "CURRENT=%%t"
|
||||||
|
|
||||||
|
if "%CURRENT%"=="%LATEST%" (
|
||||||
|
echo You already have the newest version %LATEST%.
|
||||||
|
goto :deps
|
||||||
|
)
|
||||||
|
|
||||||
|
if defined CURRENT (
|
||||||
|
for /f "delims=" %%s in ('git status --porcelain --untracked-files^=no') do set "DIRTY=1"
|
||||||
|
if defined DIRTY (
|
||||||
|
echo Some tool files in this folder were changed by hand. They will be replaced by %LATEST%.
|
||||||
|
choice /m "Continue"
|
||||||
|
if errorlevel 2 goto :fail
|
||||||
|
)
|
||||||
|
echo Updating %CURRENT% -^> %LATEST%. Changes:
|
||||||
|
git --no-pager log --oneline --no-decorate "%CURRENT%..%LATEST%"
|
||||||
|
) else (
|
||||||
|
echo Installing %LATEST%...
|
||||||
|
)
|
||||||
|
git -c advice.detachedHead=false checkout -q -f "%LATEST%"
|
||||||
|
if errorlevel 1 goto :fail
|
||||||
|
echo Now on %LATEST%.
|
||||||
|
|
||||||
|
rem ---- Python libraries (only what changed) ----------------------------------
|
||||||
|
:deps
|
||||||
|
where uv >nul 2>nul
|
||||||
|
if errorlevel 1 (
|
||||||
|
echo Installing uv ^(Python package runner, current user only^)...
|
||||||
|
powershell -NoProfile -ExecutionPolicy ByPass -c "irm https://astral.sh/uv/install.ps1 | iex"
|
||||||
|
)
|
||||||
|
where uv >nul 2>nul
|
||||||
|
if errorlevel 1 (
|
||||||
|
echo ERROR: uv installation failed. Ask the firmware team for help.
|
||||||
|
goto :fail
|
||||||
|
)
|
||||||
|
echo Checking Python libraries...
|
||||||
|
uv sync --frozen --no-dev --python 3.12 --quiet
|
||||||
|
if errorlevel 1 goto :fail
|
||||||
|
echo.
|
||||||
|
echo Done. Start the tool with run_windows.bat.
|
||||||
|
|
||||||
|
:done
|
||||||
|
if not defined KOTA_NO_PAUSE pause
|
||||||
|
exit /b 0
|
||||||
|
|
||||||
|
:fail
|
||||||
|
echo.
|
||||||
|
echo ERROR: Update did not finish.
|
||||||
|
if not defined KOTA_NO_PAUSE pause
|
||||||
|
exit /b 1
|
||||||
@@ -250,7 +250,7 @@ wheels = [
|
|||||||
|
|
||||||
[[package]]
|
[[package]]
|
||||||
name = "kota-technician-tool"
|
name = "kota-technician-tool"
|
||||||
version = "0.8.0"
|
version = "0.9.0"
|
||||||
source = { virtual = "." }
|
source = { virtual = "." }
|
||||||
dependencies = [
|
dependencies = [
|
||||||
{ name = "esptool" },
|
{ name = "esptool" },
|
||||||
|
|||||||
Reference in new issue
Block a user