kota-technician-tool/kota_tech/diag/error_ids.csv at 834bad2bce96b434bff11bdcb5818b6464b27b4b

0 Fork 0

Files

T

kkallasandClaude Opus 5.5 ab420220e1 Wi-Fi over USB tab for firmware with the USB console (v13)

Writes / reads / removes the box's Wi-Fi over the serial port with the
usb_console commands (kota ping, wifi set|get|clear, health) and follows
the box through the restart until it joins the network. The password is
sent hex-encoded and never logged.

firmware/ now holds merged-binary-v13.bin (build 3ae273ec) instead of the
previous 1.0.16 build; error_ids.csv synced with the firmware.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

2026-09-29 17:30:35 +02:00

22 KiB

Raw Blame History

1	id	module	severity	message	action
2	E-SD-01	SD	error	Failed to take SPI mutex	Internal error - send the log to the firmware team
3	E-SD-02	SD	error	Failed to mount filesystem. If you want the card to be formatted, set the CONFIG_EXAMPLE_FORMAT_IF_MOUNT_FAILED menuconfig option.	SD card is not FAT formatted or is corrupt; reformat it as FAT32 and restore ENV.TXT
4	E-SD-03	SD	error	Failed to initialize the card (%s). Make sure SD card lines have pull-up resistors in place.	Reseat the SD card; if it persists replace the card or check the SD connector
5	E-SD-04	SD	error	Failed to stat %s	Reseat the SD card; if it persists replace the card or check the SD connector
6	E-SD-05	SD	error	Failed to take SPI mutex	Internal error - send the log to the firmware team
7	E-ENV-01	ENV	error	Failed to take SPI mutex	Internal error - send the log to the firmware team
8	E-ENV-02	ENV	error	Failed to open .env file for reading	Check ENV.TXT on the SD card exists and has NAME=VALUE lines
9	E-ENV-03	ENV	error	Failed to take SPI mutex	Internal error - send the log to the firmware team
10	E-ENV-04	ENV	error	Failed to open existing .env file for reading; aborting write to avoid losing other variables	Check ENV.TXT on the SD card exists and has NAME=VALUE lines
11	E-ENV-05	ENV	error	Failed to open .env file for writing	Check ENV.TXT on the SD card exists and has NAME=VALUE lines
12	E-ENV-06	ENV	error	Failed to take SPI mutex	Internal error - send the log to the firmware team
13	E-ENV-07	ENV	error	Failed to open existing .env file for reading; aborting delete to avoid losing other variables	Check ENV.TXT on the SD card exists and has NAME=VALUE lines
14	E-ENV-08	ENV	error	Failed to open .env file for writing	Check ENV.TXT on the SD card exists and has NAME=VALUE lines
15	E-ENV-09	ENV	error	Failed to take SPI mutex	Internal error - send the log to the firmware team
16	E-INF-01	INF	error	Error %d at %s:%d	Internal error - send the log to the firmware team
17	E-INF-02	INF	error	Failed to initialize HTTP client	Internal error - send the log to the firmware team
18	E-INF-03	INF	error	Failed to perform HTTP request: %d, %s	Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT
19	E-INF-04	INF	error	Bad request, check line protocol format: %s	Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT
20	E-INF-05	INF	error	Failed to read INFLUX_URL from .env file	Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT
21	E-INF-06	INF	error	Failed to read INFLUX_TOKEN from .env file	Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT
22	E-INF-07	INF	error	Failed to take SPI mutex	Internal error - send the log to the firmware team
23	E-INF-08	INF	error	Failed to open buffer file for reading	Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT
24	E-INF-09	INF	error	Failed to take SPI mutex	Internal error - send the log to the firmware team
25	E-INF-10	INF	error	Failed to open buffer file for clearing	Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT
26	E-INF-11	INF	error	Failed to take SPI mutex	Internal error - send the log to the firmware team
27	E-INF-12	INF	error	Failed to create buffer file	Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT
28	E-INF-13	INF	error	Failed to open buffer file for appending	Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT
29	E-INF-14	INF	error	Failed to take SPI mutex	Internal error - send the log to the firmware team
30	E-INF-15	INF	error	Failed to open buffer file for counting	Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT
31	E-INF-16	INF	error	Failed to read buffer for flushing: %s	Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT
32	E-INF-17	INF	error	Failed to write chunk to Influx: %s	Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT
33	E-INF-18	INF	error	Failed to write chunk with 5 retries to Influx: %s	Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT
34	E-INF-19	INF	error	Failed to clear buffer after flushing: %s	Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT
35	E-INF-20	INF	error	Failed to flush buffer before writing: %s	Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT
36	E-INF-21	INF	error	Failed to write to Influx: %s	Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT
37	E-INF-22	INF	error	Failed to append new entry to buffer: %s	Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT
38	E-OTA-01	OTA	error	Error %s at %s:%d	Internal error - send the log to the firmware team
39	E-OTA-02	OTA	error	Failed to create OTA task	Internal error - send the log to the firmware team
40	E-OTA-03	OTA	error	Failed to open NVS: %s	Internal error - send the log to the firmware team
41	E-OTA-04	OTA	error	Failed to read OTA token from NVS: %s	Internal error - send the log to the firmware team
42	E-OTA-05	OTA	error	Failed to read OTA token from NVS: %s	Internal error - send the log to the firmware team
43	E-OTA-06	OTA	error	Failed to get running partition	Check the network connection; if it persists send the log to the firmware team
44	E-OTA-07	OTA	error	Failed to get OTA state	Check the network connection; if it persists send the log to the firmware team
45	E-OTA-08	OTA	error	Failed to read update metadata from NVS: %s	Internal error - send the log to the firmware team
46	E-OTA-09	OTA	error	Failed to report failed selfcheck: %s	Check the network connection; if it persists send the log to the firmware team
47	E-OTA-10	OTA	error	Failed to initialize HTTP client	Internal error - send the log to the firmware team
48	E-OTA-11	OTA	error	Device registration failed with status code: %d	Check the network connection; if it persists send the log to the firmware team
49	E-OTA-12	OTA	error	Device registration failed: %s	Check the network connection; if it persists send the log to the firmware team
50	E-OTA-13	OTA	error	Failed to check for updates: %s	Check the network connection; if it persists send the log to the firmware team
51	E-OTA-14	OTA	error	Free stack size decreased from %u to %u	Internal error - send the log to the firmware team
52	E-OTA-15	OTA	error	Failed to initialize HTTP client	Internal error - send the log to the firmware team
53	E-OTA-16	OTA	error	OTA Update check failed with status code: %d	Check the network connection; if it persists send the log to the firmware team
54	E-OTA-17	OTA	error	Update %s has already been tried %u times and failed, not trying again	Internal error - send the log to the firmware team
55	E-OTA-18	OTA	error	OTA update failed: %s	Check the network connection; if it persists send the log to the firmware team
56	E-OTA-19	OTA	error	Failed to read update metadata from NVS: %s	Internal error - send the log to the firmware team
57	E-OTA-20	OTA	error	Failed to read update ID from NVS: %s	Internal error - send the log to the firmware team
58	E-OTA-21	OTA	error	Failed to read update ID from NVS: %s	Internal error - send the log to the firmware team
59	E-OTA-22	OTA	error	Failed to read update tries from NVS: %s	Internal error - send the log to the firmware team
60	E-OTA-23	OTA	error	Failing selfcheck: %s	Firmware update failed its self check and will roll back; check the sensors listed in the log
61	E-OTA-24	OTA	error	Failed to send update result: %s	Check the network connection; if it persists send the log to the firmware team
62	E-OTA-25	OTA	error	Failed to mark app as invalid for rollback: %s	Internal error - send the log to the firmware team
63	E-OTA-26	OTA	error	Failed to send update result: %s	Check the network connection; if it persists send the log to the firmware team
64	E-OTA-27	OTA	error	Failed to mark app as valid to commit update: %s	Internal error - send the log to the firmware team
65	E-OTA-28	OTA	error	Failed to initialize HTTP client	Internal error - send the log to the firmware team
66	E-OTA-29	OTA	error	Failed to send update result with status code: %d	Check the network connection; if it persists send the log to the firmware team
67	E-WIFI-01	WIFI	error	esp_netif_init() failed: %s	Check WiFi signal and credentials; re-run WiFi provisioning (short button press)
68	E-WIFI-02	WIFI	error	esp_event_loop_create_default() failed: %s	Check WiFi signal and credentials; re-run WiFi provisioning (short button press)
69	E-WIFI-03	WIFI	error	esp_wifi_init() failed: %s	Check WiFi signal and credentials; re-run WiFi provisioning (short button press)
70	E-WIFI-04	WIFI	error	Failed to register WIFI_EVENT handler: %s	Check WiFi signal and credentials; re-run WiFi provisioning (short button press)
71	E-WIFI-05	WIFI	error	Failed to register IP_EVENT handler: %s	Check WiFi signal and credentials; re-run WiFi provisioning (short button press)
72	E-WIFI-06	WIFI	error	esp_wifi_set_mode() failed: %s	Check WiFi signal and credentials; re-run WiFi provisioning (short button press)
73	E-WIFI-07	WIFI	error	esp_timer_create() failed: %s	Check WiFi signal and credentials; re-run WiFi provisioning (short button press)
74	E-WIFI-08	WIFI	error	esp_wifi_start() failed: %s	Check WiFi signal and credentials; re-run WiFi provisioning (short button press)
75	E-WIFI-09	WIFI	error	esp_wifi_set_config() failed: %s	Check WiFi signal and credentials; re-run WiFi provisioning (short button press)
76	E-WIFI-10	WIFI	error	esp_wifi_connect() failed: %s	Check WiFi signal and credentials; re-run WiFi provisioning (short button press)
77	E-WIFI-11	WIFI	error	esp_wifi_set_mode(APSTA) failed: %s	Check WiFi signal and credentials; re-run WiFi provisioning (short button press)
78	E-WIFI-12	WIFI	error	esp_wifi_set_config(AP) failed: %s	Check WiFi signal and credentials; re-run WiFi provisioning (short button press)
79	E-WIFI-13	WIFI	error	esp_wifi_connect() failed: %s	Check WiFi signal and credentials; re-run WiFi provisioning (short button press)
80	E-WIFI-14	WIFI	error	esp_wifi_scan_start() failed: %s	Check WiFi signal and credentials; re-run WiFi provisioning (short button press)
81	E-WIFI-15	WIFI	error	esp_wifi_scan_get_ap_num() failed: %s	Check WiFi signal and credentials; re-run WiFi provisioning (short button press)
82	E-WIFI-16	WIFI	error	esp_wifi_scan_get_ap_records() failed: %s	Check WiFi signal and credentials; re-run WiFi provisioning (short button press)
83	E-PROV-01	PROV	error	mdns_init() failed: %s	Retry WiFi provisioning (short button press); restart the device if it persists
84	E-PROV-02	PROV	error	httpd_start() failed: %s	Retry WiFi provisioning (short button press); restart the device if it persists
85	E-MAIN-01	MAIN	error	Error %d at %s:%d	Internal error - send the log to the firmware team
86	E-MAIN-02	MAIN	error	Failed to open commissioning window, err:%	Internal error - send the log to the firmware team
87	E-MAIN-03	MAIN	error	Attribute update callback: endpoint_id: %u, cluster_id: 0x%lx, attribute_id: 0x%lx	Internal error - send the log to the firmware team
88	E-MAIN-04	MAIN	error	Device MAC address: %02X:%02X:%02X:%02X:%02X:%02X	Internal error - send the log to the firmware team
89	E-MAIN-05	MAIN	error	Failed to initialize SD card: %s	Reseat the SD card; if it persists replace the card or check the SD connector
90	E-MAIN-06	MAIN	error	Failed to initialize EnvironmentService: %s	Check ENV.TXT on the SD card exists and has NAME=VALUE lines
91	E-MAIN-07	MAIN	error	Failed to initialize WifiCredentialsService: %s	Check ENV.TXT on the SD card exists and has NAME=VALUE lines
92	E-MAIN-08	MAIN	error	WiFi provisioning server failed to start: %s; clearing HTTP_SERVER and restarting	Retry WiFi provisioning (short button press); restart the device if it persists
93	E-MAIN-09	MAIN	error	Failed to create Matter node	Internal error - send the log to the firmware team
94	E-MAIN-10	MAIN	error	Failed to start ESP-Matter	Internal error - send the log to the firmware team
95	E-MAIN-11	MAIN	error	Failed to start WifiService: %s	Check WiFi signal and credentials; re-run WiFi provisioning (short button press)
96	E-MAIN-12	MAIN	error	Failed to initialized the encrypted OTA, err: %d	Internal error - send the log to the firmware team
97	E-MAIN-13	MAIN	error	Failed to initialize RTC: %s	Check the RTC (DS1307) and the sensor cable
98	E-MAIN-14	MAIN	error	Failed to initialize Influx buffer: %s	Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT
99	E-MAIN-15	MAIN	error	Failed to initialize BME688: %s	Check the BME688 sensor and the sensor cable
100	E-MAIN-16	MAIN	error	Failed to initialize SEN66: %s	Check the SEN66 sensor, its power supply and the sensor cable
101	E-MAIN-17	MAIN	error	Failed to initialize AS7341: %s	Check the AS7341 light sensor and the sensor cable
102	E-MAIN-18	MAIN	error	Failed to initialize Microphone: %s	Check the microphone board and its cable
103	E-MAIN-19	MAIN	error	Failed to initialize Flicker sensor: %s	Check the flicker sensor and its cable
104	E-MAIN-20	MAIN	error	Failed to initialize DeviceStatus: %s	Internal error - send the log to the firmware team
105	E-MAIN-21	MAIN	error	BME688 self check failed: %s	Check the BME688 sensor and the sensor cable
106	E-MAIN-22	MAIN	error	SEN66 self check failed: %s	Check the SEN66 sensor, its power supply and the sensor cable
107	E-MAIN-23	MAIN	error	AS7341 self check failed: %s	Check the AS7341 light sensor and the sensor cable
108	E-MAIN-24	MAIN	error	Microphone self check failed: %s	Check the microphone board and its cable
109	E-MAIN-25	MAIN	error	Flicker sensor self check failed: %s	Check the flicker sensor and its cable
110	E-MAIN-26	MAIN	error	Failed to report passed selfcheck: %s	Internal error - send the log to the firmware team
111	E-MAIN-27	MAIN	error	Failed to flush Influx buffer: %s	Check the network connection and INFLUX_URL / INFLUX_TOKEN in ENV.TXT
112	E-STAT-01	STAT	error	Failed to initialize LED strip: %s	Internal error - send the log to the firmware team
113	E-SPI-01	SPI	error	Failed to take SPI mutex	Internal error - send the log to the firmware team
114	E-RTC-01	RTC	error	Failed to take I2C mutex	Internal error - send the log to the firmware team
115	E-RTC-02	RTC	error	Failed to add I2C device: %s	Check the RTC (DS1307) and the sensor cable
116	E-RTC-03	RTC	error	Failed to initialize DS1307 control register: %s	Check the RTC (DS1307) and the sensor cable
117	E-RTC-04	RTC	error	Attempted to set time on uninitialized DS1307	Internal error - send the log to the firmware team
118	E-RTC-05	RTC	error	Failed to take I2C mutex	Internal error - send the log to the firmware team
119	E-RTC-06	RTC	error	Attempted to get time on uninitialized DS1307	Internal error - send the log to the firmware team
120	E-RTC-07	RTC	error	Failed to take I2C mutex	Internal error - send the log to the firmware team
121	E-RTC-08	RTC	error	Attempted to start updating time on uninitialized DS1307	Internal error - send the log to the firmware team
122	E-BME-01	BME	error	Failed to take I2C mutex	Internal error - send the log to the firmware team
123	E-BME-02	BME	error	Failed to add I2C device: %d	Check the BME688 sensor and the sensor cable
124	E-BME-03	BME	error	Failed to initialize BME688: %d	Check the BME688 sensor and the sensor cable
125	E-BME-04	BME	error	Failed to set BME688 configuration: %d	Check the BME688 sensor and the sensor cable
126	E-BME-05	BME	error	Failed to set BME688 heater configuration: %d	Check the BME688 sensor and the sensor cable
127	E-BME-06	BME	error	Failed to set BME688 operation mode: %d	Check the BME688 sensor and the sensor cable
128	E-BME-07	BME	error	Failed to get BME688 data: %d	Check the BME688 sensor and the sensor cable
129	E-BME-08	BME	error	No new data available from BME688	Check the BME688 sensor and the sensor cable
130	E-BME-09	BME	error	Failed to get data from BME688: %s	Check the BME688 sensor and the sensor cable
131	E-BME-10	BME	error	Self check failed: %s	Check the BME688 sensor and the sensor cable
132	E-BME-11	BME	error	Failed to take I2C mutex	Internal error - send the log to the firmware team
133	E-BME-12	BME	error	I2C read failed: %s	Check the BME688 sensor and the sensor cable
134	E-BME-13	BME	error	Failed to take I2C mutex	Internal error - send the log to the firmware team
135	E-BME-14	BME	error	Failed to allocate memory for I2C write buffer	Internal error - send the log to the firmware team
136	E-BME-15	BME	error	I2C write failed: %s	Check the BME688 sensor and the sensor cable
137	E-SEN-01	SEN	error	Failed to take I2C mutex	Internal error - send the log to the firmware team
138	E-SEN-02	SEN	error	Failed to add I2C device: %d	Check the SEN66 sensor, its power supply and the sensor cable
139	E-SEN-03	SEN	error	Attempted to wake up uninitialized SEN66	Internal error - send the log to the firmware team
140	E-SEN-04	SEN	error	Failed to take sensor mutex	Internal error - send the log to the firmware team
141	E-SEN-05	SEN	error	Failed to send start measurement command: %d	Check the SEN66 sensor, its power supply and the sensor cable
142	E-SEN-06	SEN	error	Attempted to sleep uninitialized SEN66	Internal error - send the log to the firmware team
143	E-SEN-07	SEN	error	Failed to take sensor mutex	Internal error - send the log to the firmware team
144	E-SEN-08	SEN	error	Failed to send stop measurement command: %d	Check the SEN66 sensor, its power supply and the sensor cable
145	E-SEN-09	SEN	error	Failed to take I2C mutex	Internal error - send the log to the firmware team
146	E-SEN-10	SEN	error	Failed to take I2C mutex	Internal error - send the log to the firmware team
147	E-SEN-11	SEN	error	Failed to read ready status: %d	Check the SEN66 sensor, its power supply and the sensor cable
148	E-SEN-12	SEN	error	Sensor not ready after %d attempts, trying to wake it up	Check the SEN66 sensor, its power supply and the sensor cable
149	E-SEN-13	SEN	error	Failed to read measurement: %d	Check the SEN66 sensor, its power supply and the sensor cable
150	E-SEN-14	SEN	error	Failed while awaiting sensor ready: %d	Check the SEN66 sensor, its power supply and the sensor cable
151	E-SEN-15	SEN	error	Failed to read measurement for line protocol: %d	Check the SEN66 sensor, its power supply and the sensor cable
152	E-SEN-16	SEN	error	Self-check failed: Sensor not ready: %d	Check the SEN66 sensor, its power supply and the sensor cable
153	E-SEN-17	SEN	error	Self-check failed: Failed to read measurement: %d	Check the SEN66 sensor, its power supply and the sensor cable
154	E-AS-01	AS	error	Failed to take I2C mutex	Internal error - send the log to the firmware team
155	E-AS-02	AS	error	Failed to initialize AS7341: %s	Check the AS7341 light sensor and the sensor cable
156	E-AS-03	AS	error	Attempted to wake up uninitialized AS7341	Internal error - send the log to the firmware team
157	E-AS-04	AS	error	Failed to take I2C mutex	Internal error - send the log to the firmware team
158	E-AS-05	AS	error	Failed to wake up AS7341: %s	Check the AS7341 light sensor and the sensor cable
159	E-AS-06	AS	error	Attempted to put uninitialized AS7341 to sleep	Internal error - send the log to the firmware team
160	E-AS-07	AS	error	Failed to take I2C mutex	Internal error - send the log to the firmware team
161	E-AS-08	AS	error	Failed to put AS7341 to sleep: %s	Check the AS7341 light sensor and the sensor cable
162	E-AS-09	AS	error	Attempted to get line protocol on uninitialized AS7341	Internal error - send the log to the firmware team
163	E-AS-10	AS	error	Failed to take I2C mutex	Internal error - send the log to the firmware team
164	E-AS-11	AS	error	Failed to read spectral data: %s	Check the AS7341 light sensor and the sensor cable
165	E-AS-12	AS	error	Failed to read basic counts data: %s	Check the AS7341 light sensor and the sensor cable
166	E-AS-13	AS	error	Failed to read flicker detection state: %s	Check the AS7341 light sensor and the sensor cable
167	E-AS-14	AS	error	Self-check failed: Failed to read spectral data: %s	Check the AS7341 light sensor and the sensor cable
168	E-MIC-01	MIC	error	Failed to create I2S channel: %s	Check the microphone board and its cable
169	E-MIC-02	MIC	error	Failed to initialize I2S channel in standard mode: %s	Check the microphone board and its cable
170	E-MIC-03	MIC	error	Failed to configure shutdown pin: %s	Check the microphone board and its cable
171	E-MIC-04	MIC	error	Failed to read samples from I2S channel: %s	Check the microphone board and its cable
172	E-MIC-05	MIC	error	Failed to read samples for line protocol: %s	Check the microphone board and its cable
173	E-FLK-01	FLK	error	Error %s at %s:%d	Internal error - send the log to the firmware team
174	E-FLK-02	FLK	error	Attempting to initialize sensor that is already initialized	Check the flicker sensor and its cable
175	E-FLK-03	FLK	error	Failed to allocate memory for FFT buffers	Internal error - send the log to the firmware team
176	E-FLK-04	FLK	error	Failed to initialize FFT: %s	Check the flicker sensor and its cable
177	E-FLK-05	FLK	error	Attempting to read from uninitialized sensor	Internal error - send the log to the firmware team
178	E-FLK-06	FLK	error	Failed to take I2C mutex	Internal error - send the log to the firmware team
179	E-FLK-07	FLK	error	Failed to get dominant frequency: %s	Check the flicker sensor and its cable
180	E-FLK-08	FLK	error	Attempting to read from uninitialized sensor	Internal error - send the log to the firmware team
181	E-FLK-09	FLK	error	Failed to read ADC value: %s	Check the flicker sensor and its cable
182	E-FLK-10	FLK	error	Failed to create gather task: %s	Internal error - send the log to the firmware team
183	E-FLK-11	FLK	error	Attempting to self check uninitialized sensor	Internal error - send the log to the firmware team
184	E-FLK-12	FLK	error	Self check failed to get dominant frequency: %s	Check the flicker sensor and its cable
185	E-DEV-01	DEV	error	Failed to initialize ADC unit: %s	Internal error - send the log to the firmware team
186	E-DEV-02	DEV	error	Failed to configure ADC channel: %s	Internal error - send the log to the firmware team
187	E-DEV-03	DEV	error	Failed to install temperature sensor: %s	Internal error - send the log to the firmware team
188	E-DEV-04	DEV	error	Failed to read ADC value: %s	Internal error - send the log to the firmware team
189	E-DEV-05	DEV	error	Failed to allocate memory for task list buffer	Internal error - send the log to the firmware team
190	E-GATH-01	GATH	error	Failed to take line protocol mutex	Internal error - send the log to the firmware team
191	E-GATH-02	GATH	error	Failed to get line protocol from sensor	Device ran out of memory; restart it and send the log to the firmware team
192	E-GATH-03	GATH	error	Failed to create task for sensor	Internal error - send the log to the firmware team
193	E-GATH-04	GATH	error	Failed to create main gather task	Internal error - send the log to the firmware team
194	E-CON-01	CON	error	Failed to install USB-Serial-JTAG driver: %s	Internal error - send the log to the firmware team

22 KiB Raw Blame History

22 KiB

Raw Blame History