- Test box: restart + start-up capture + online InfluxDB check (data newer
than the restart), with a status strip; checklist and findings are the
main view, live log / guided troubleshooting / box details are tabs,
rarely used actions in a More menu
- light palette on all systems (macOS dark mode made the colours unreadable)
- new rule influx.invalid_value: -inf from a silent microphone makes
InfluxDB reject every upload (HTTP 400); guide end names it
- exclusive serial port on macOS/Linux: two tool windows no longer split
the log between them
- InfluxDB check: `since` filter, neutral wording when nothing new arrives
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
New guided check "Sensor data in the database (InfluxDB)", also the last
step of the Quick check on the green path. It queries InfluxDB (read
token) for the newest point per measurement of the box and tells apart:
sensor data arrives / status arrives without sensor data / offline now /
never seen / check not possible. Polls every 30 s for up to 4 minutes.
With a stopped RTC in the log it concludes that sensor readings are lost
(stamped 1 Jan 2000): box A4:CB:8F:C9:47:3C sent only device_status and
microphone.
- service/influx.py: query, CSV parsing, classification (no new deps)
- guides: new step type "influx" (host answers via influx_result)
- Settings > InfluxDB access (or KOTA_INFLUX_TOKEN); token never logged
- service status mapping for tech.influx.* findings
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
On macOS/Linux the OS asserts DTR and RTS when the port is opened and
pyserial then writes DTR before RTS, passing through RTS=1/DTR=0 - the
USB-Serial-JTAG reset state. Every Connect restarted the box. Drop RTS
before open and DTR right after it on posix; Windows is unchanged.
Verified on macOS 27 / arm64 with box A4:CB:8F:C9:47:3C (fw 1.0.16,
build 3ae273ec): connect keeps the box running, Reset & capture still
restarts it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Guide, README, quick start and flashing hints no longer say 'no hub' or 'directly to the laptop'; the requirement is a USB 2.0 type-A plug between box and computer (USB-C only is the failing case).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
docs/INSTRUKCJA_TECHNIKA.md: install, update, connecting the box, reading
the Diagnosis panel, guided checks, Wi-Fi over USB, flashing, SD card,
service report, LED table and common problems, with screenshots of the
app rendered from a real v13 capture (docs/img). The box must be
connected with a USB 2.0 type-A cable directly to the computer; the
quick-start screen and README say so too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Capture from box 14:C1:9F:57:72:48 after flashing merged-binary-v13.bin: ping and wifi get replies, logs intact through the USB-Serial-JTAG driver.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Writes / reads / removes the box's Wi-Fi over the serial port with the
usb_console commands (kota ping, wifi set|get|clear, health) and follows
the box through the restart until it joins the network. The password is
sent hex-encoded and never logged.
firmware/ now holds merged-binary-v13.bin (build 3ae273ec) instead of the
previous 1.0.16 build; error_ids.csv synced with the firmware.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Some files had been saved with CRLF on Windows, so a one-line change
showed as a whole-file diff. .gitattributes now stores text as LF
(.bat stays CRLF for cmd, .command/.sh LF for macOS).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
cmd drops "!" from messages when delayed expansion is on, so errors
read "ERROR:". README describes the two files per system and the
first install from a release zip.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
update_windows.bat / update_macos.command: fetch release tags from Gitea,
move the folder to the newest vX.Y (git downloads only what changed),
connect a folder unpacked from a release zip on first run, install git/uv
when missing and sync the Python libraries. Developer copies on a branch
are left alone.
run_* and update_* share one environment (KotaTechnicianTool/venv)
instead of one per version.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Describes the zip from Releases and git clone/pull, the macOS
executable-bit note for zips, and the branch/PR/tag workflow for the team.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
kkallas
