You are testing the KOTA sensorbox technician tool v0.5 on macOS. The current folder is
004-technician_tool/v0.5 (a Python/PySide6 desktop app; it has only been tested on Windows so far).

Rules:
- Python only via uv or conda/mamba. Never use bare/system python or pip.
- Do not build, modify or flash firmware other than the bundled firmware/new_system.bin.
- Do not push anything to Git or GitLab. This is a local demo.
- Ask me before any destructive action: formatting an SD card, Full-mode flashing, or deleting files.
  Before formatting, show me the exact disk (identifier, name, size, current files).
- Do not change code without telling me. Report bugs with evidence (commands and output).

Tests, in order. Report pass/fail with evidence for each:
1. Launch: `bash run_macos.command` (it offers to install uv). The app window opens; note any warnings.
2. Tests: `UV_PROJECT_ENVIRONMENT="$HOME/Library/Caches/KotaTechnicianTool/venv-0.5" uv run --frozen pytest -q`
3. Serial: plug in the sensorbox (native USB). The port list shows a /dev/cu.usbmodem* "Sensorbox (native USB)"
   entry with a MAC. Connect, press "Reset & capture": the boot log starts at "ESP-ROM:esp32s3" and the
   Diagnosis panel identifies firmware v1.0 (build 45fa9d5b9). Check whether the port disappears after the
   reset and whether the tool reconnects.
4. Guided troubleshooting: run "Quick check" and answer truthfully with what I tell you the LED shows.
5. Flash (App only, factory image; the box already runs it): the tool must enter flashing mode by itself,
   write, restart the box and report "Success ... build 45fa9d5b9". Capture the esptool output.
6. SD card tab: the settings load from ../../002-SD_card_format/ENV.txt. The card reader and card are listed
   (internal disks must NOT be listed). Run "Check card", then, after my OK, "Format card and write ENV.TXT".
   It must use `diskutil eraseDisk FAT32 KOTA MBRFormat` on the correct disk, write ENV.TXT byte-identical
   to the template, and eject the card.
7. "Service report..." opens the browser at https://service.kota-app.com/<MAC>#kota-report=... (it is fine
   if the page itself cannot prefill yet).

At the end, write a short report: macOS version, Mac model/architecture, each test with result, errors, and
suggested fixes (file:line).